Re: [ATM] pitch tool

[vorblesnak@peak.org]

Dale Eason wrote:

>
> Usually the tool is thicker than the pitch and in all
> cases gives you something to touch without touching
> the pitch.  If the pitch has wrapped around and is on
> the side of the tool you can just chip it off.
>
> Don't understand what you mean by the pitch tool
> pulled away along the edge when making. Pulled away
> from what? Send me a pic if you want.
>
> Dale Eason
>
>
> --- horace r davis <hrd9@juno.com> wrote:
>
>> the pitch tool pulled away along edge when making.

I have some experience in this, I think.  The last lap I made the pitch
did not adhere near the edge.  I had pitched this tool before and I
suspect there was debris left on the surface after I cleaned the old lap
off of it.  A good wipe down with turp would have assured a good adhesion.
 As it was it was usable.

David Davis
Toledo, OR 97391



_______________________________________________
ATM mailing list http://www.atmlist.net/