[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] pitch tool done

To: atm@atmlist.net
Subject: [ATM] pitch tool done
From: horace r davis <hrd9@juno.com>
Date: Thu, 24 May 2007 03:37:36 -0400
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

thanks all !  compressed air separated the tool in 2 minutes, add pitch
to fill in void on one edge reheated tool in dryer made ply able for
channeling  added dish soap to COE made it creamy did not dry out when
used, used fiberglass window screen on last press. looks great just one
air bubble in one square. thanks all !
_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: [ATM] repressing pitch tool
Next by Author: [ATM] pitch lap
Previous by thread: Re: [ATM] pitch tool
Next by thread: [ATM] pitch too stuck
Index(es):
- Author
- Thread