Re: [ATM] Coulter secondary adhessive

["Lawrence D. Lopez" <lopez@mv.mv.com>]

Thanks Michael, Tom, Jarvis, and Mike.
This was a lot of help.
I'm sure he can take it from here.

I've forwarded him all of your messages.



Lawrence D. Lopez wrote:
> A friend of mine wants to put what I choose
> to call a fancy heater on his secondary.
> It has 9 volt battery and tries to keep the
> secondary slightly warmer than free air.
>
> At any rate he has a 17.5 coulter mirror
> set from a Coulter OEM tube.
>
> The secondary has a very wide 3 inch or so
> single element spider and has a bent piece
> of 3" metal glued to the secondary.
> It's apparently painted flat black.
>
> My friend want to remove the secondary
> from the "holder" to which it is glued.
>
> Does anyone know what the glue might be ?
> He thinks it is epoxy but I would have expected
> that to deform the secondary.
>
> Any ideas on how to remove the secondary ?
>
> It barely possible that this was redone by someone
> other than Coulter.
>
> Larry
>
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
>
>   

_______________________________________________
ATM mailing list http://www.atmlist.net/