[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] make pitch lap tool

To: "'horace r davis'" <hrd9@juno.com>, <atm@atmlist.net>
Subject: Re: [ATM] make pitch lap tool
From: "Jerry" <wa4guu@verizon.net>
Date: Sun, 13 May 2007 20:43:48 -0400
Delivered-to: atm_arc@astro.umsystem.edu
Importance: Normal
In-reply-to: <20070512.052124.3332.0.hrd9@juno.com>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
Thread-index: AceUds7NJXuHJWFyTF+HyUnXoZFxEQBSLySA

I didn't see much comment on the weight. I'll pass on what skilled mirror
maker has told me. About .2 to .25 pounds per square inch. That come in at
40 to 50 pounds for a 16 inch. I've always used less than that. I may have
always been wrong.

Jerry

-----Original Message-----
From: horace r davis
 
I am getting ready to make a 16 in pitch lap tool I like your help on
ideas for the backing and weight ?


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] make pitch lap tool
  - From: Richard <cnc@cncservo.co.uk>

References:
- [ATM] make pitch lap tool
  - From: horace r davis <hrd9@juno.com>

Prev by Author: Re: [ATM] make pitch lap tool
Next by Author: Re: [ATM] fishing for a lil polishing advice!
Previous by thread: Re: [ATM] make pitch lap tool
Next by thread: Re: [ATM] make pitch lap tool
Index(es):
- Author
- Thread