[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] chip on mirror edge

To: atm@atmlist.net
Subject: [ATM] chip on mirror edge
From: horace r davis <hrd9@juno.com>
Date: Sun, 6 May 2007 07:19:43 -0400
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

I am still getting chips on edge of mirror i just finished wao 25 can i
go back and re bevel the edge this time it came from the tile tool
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] chip on mirror edge
  - From: "Francis J. O'Reilly" <foreilly@verizon.net>

Prev by Author: [ATM] Wao grit
Next by Author: [ATM] done with wao 25
Previous by thread: Re: [ATM] Can one build a Newtonian stiff enough to use a Guide Scope?
Next by thread: Re: [ATM] chip on mirror edge
Index(es):
- Author
- Thread