Re: [ATM] Squeeze bottle

["Norm Prince" <norman.prince@verizon.net>]

your making a lot of progress...great!

My opinions aren't worth the electrons they travel on, but the way i do it 
is pretty simple.  I dump some grit in the bottle...about 1/3 full and then 
i add small amounts of water at a time (shaking it up as i go) until its say 
a little thinner than the mustard that would normally occupy the bottle.  My 
criteria is simple...the mix should be opaque (sp?)..but flow easily.  It 
should not have a "clumpy" look to it when you squirt it out of the bottle. 
I shake the bottle up real good before i use it and let it sit for a couple 
of minutes just incase there are any really big particles in there by 
mistake...so that they might fall to the bottom.

as always good luck.

-norm-

----- Original Message ----- 
From: "horace r davis" <hrd9@juno.com>
To: <atm@atmlist.net>
Sent: Thursday, May 03, 2007 18:06 PM
Subject: [ATM] Squeeze bottle


>I am going to wao 25 an plan to use a squeeze bottle how do you mix the
> power and water I am using a 16 oz mustard bottle I don't half to fill
> it.
> 90 hr done with 500 grit 16 inch mirror
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 


_______________________________________________
ATM mailing list http://www.atmlist.net/