Amateur Telescope Makers (ATM) Archive for MAY06 - by thread

• Author Index

• Re: [ATM] Alternative Petzval Design, Richard F.L.R. Snashall
  • Re: [ATM] Alternative Petzval Design, Richard F.L.R. Snashall
    • Re: [ATM] Alternative Petzval Design, Richard F.L.R. Snashall
• [ATM] aluminum steel corrosion problem, Gil McFarlane
  • Re: [ATM] aluminum steel corrosion problem, Richard
  • Re: [ATM] aluminum steel corrosion problem, Patrick St. Jean
  • Re: [ATM] aluminum steel corrosion problem, Don Clement
  • Re: [ATM] aluminum steel corrosion problem, Kevin MIchael Zabbo
  • Re: [ATM] aluminum steel corrosion problem, Bob May
    • Re: [ATM] aluminum steel corrosion problem, Don Clement
      • Re: [ATM] aluminum steel corrosion problem, hermit
      • Re: [ATM] aluminum steel corrosion problem, Don Clement
      • Re: [ATM] aluminum steel corrosion problem, hermit
  • Re: [ATM] aluminum steel corrosion problem, Lafotec
  • <Possible follow-ups>
  • Re: [ATM] aluminum steel corrosion problem, Bob P. Sumitro
  • Re: [ATM] Aluminum steel corrosion problem, ntent
• [ATM] Another update to the kiln project page is now up., Thomas Janstrom
• [ATM] Astrotracker Mk 2, Ulhas Deshpande
  • <Possible follow-ups>
  • Re: [ATM] Astrotracker Mk 2, Vladimir Galogaza
    • Re: [ATM] Astrotracker Mk 2, Mike Lockwood
  • Re: [ATM] Astrotracker Mk 2, Ulhas Deshpande
  • Re: [ATM] Astrotracker Mk 2, GARY FUCHS
    • Re: [ATM] Astrotracker Mk 2, PaulG
• Re: [ATM] ATM Digest, Vol 29, Issue 10, Martin Trittelvitz
• [ATM] ATM: Global dimming, KR
  • Re: [ATM] ATM: Global dimming, tony gondola
• [ATM] ATM: pitch removal, The Alarm Co.
  • Re: [ATM] ATM: pitch removal, Mike Lockwood
• [ATM] ATM: RE: coffee table glass, The Alarm Co.
• [ATM] Baffling a Gregorian and corrector plate fabrication., Douglas S Angle
  • Re: [ATM] Baffling a Gregorian and corrector plate fabrication., Mike Lockwood
  • Re: [ATM] Baffling a Gregorian and corrector plate fabrication., Kevin MIchael Zabbo
    • [ATM] ATM related things to see and do in Shanghai?, fabio
      • [ATM] Foucault and interferometry surface detail compared. Mirror two., Dale Eason
      • Re: [ATM] Foucault and interferometry surface detail compared. Mirror two., Michael Peck
  • <Possible follow-ups>
  • Re: [ATM] Baffling a Gregorian and corrector plate fabrication., Jarvis Krumbein
    • [ATM] rutten & van venrooij - proper pronunciation, Guy Brandenburg
      • Re: [ATM] rutten & van venrooij - proper pronunciation, A. Suijkerbuijk
  • Re: [ATM] Baffling a Gregorian and corrector plate fabrication., John Sherman
    • Re: [ATM] Baffling a Gregorian and corrector plate fabrication., Kevin MIchael Zabbo
• [ATM] Barlow quality/testing, tony gondola
  • Re: [ATM] Barlow quality/testing, Nils Olof Carlin
  • Re: [ATM] Barlow quality/testing, Jerry
  • Re: [ATM] Barlow quality/testing, Scott Ewart
• [ATM] Berry out of date?, COO
• [ATM] Berry out of date?, DU
  • Message not available
    • Re: [ATM] Berry out of date?, DU
      • Re: [ATM] Berry out of date?, Guy Brandenburg
  • Re: [ATM] Berry out of date?, Bob May
    • Re: [ATM] Berry out of date?, B. Bainbridge
  • Re: [ATM] Berry out of date?, Mike Lockwood
• [ATM] Beveling Pyrex or Plate glass, Russell Jocoy
  • Re: [ATM] Beveling Pyrex or Plate glass, Richard
  • <Possible follow-ups>
  • Re: [ATM] Beveling Pyrex or Plate glass, Scott Milligan
• [ATM] Bevelling, Richard
  • Re: [ATM] Bevelling, Jan Bentz
    • Re: [ATM] Bevelling, Richard
      • Re: [ATM] Bevelling, Michael Lindner
      • Re: [ATM] Bevelling, Kevin MIchael Zabbo
      • Re: [ATM] Bevelling, Guy Brandenburg
      • Re: [ATM] Bevelling, Bob May
      • Re: [ATM] Bevelling, Richard
  • Re: [ATM] Bevelling, Ken Hunter
• [ATM] checking in, Ron Lippard - Renaissance Reproductions
• [ATM] Coatings, Chris Welsh
  • Re: [ATM] Coatings, Rick M
  • Re: [ATM] Coatings, George Anderson
• [ATM] Collimation, johncdeitz
  • <Possible follow-ups>
  • [ATM] collimation, Joseph Johnston
  • Re: [ATM] Collimation, johncdeitz
  • Re: [ATM] collimation, johncdeitz
• [ATM] Conical mirror for Newtonian, andrewstuartallen
  • Re: [ATM] Conical mirror for Newtonian, Mike Lockwood
• [ATM] Device against Astigmatism in Machine Polishing, Martin Cibulski
  • Re: [ATM] Device against Astigmatism in Machine Polishing, Mark Holm
  • <Possible follow-ups>
  • Re: [ATM] Device against Astigmatism in Machine Polishing, Martin Cibulski
    • Re: [ATM] Device against Astigmatism in Machine Polishing, Mark Holm
• [ATM] Difficulty Level of figuring 3/4 Plate Glass, COO
  • Re: [ATM] Difficulty Level of figuring 3/4 Plate Glass, Bob May
    • Re: [ATM] Difficulty Level of figuring 3/4 Plate Glass, Mel Bartels
  • Re: [ATM] Difficulty Level of figuring 3/4 Plate Glass, Mike Lockwood
    • Re: [ATM] Difficulty Level of figuring 3/4 Plate Glass, Bob May
  • <Possible follow-ups>
  • [ATM] Difficulty Level of figuring 3/4 Plate Glass, COO
• [ATM] Discovery Channel 4 meter mirror is only 4 inches thick, Jim
• [ATM] Dumb Question: how to measure a..., Mutalib Abdallah
  • Re: [ATM] Dumb Question: how to measure a..., Pete
  • Re: [ATM] Dumb Question: how to measure a..., Dale Eason
    • Re: [ATM] Dumb Question: how to measure a..., Dan Newman
    • Re: [ATM] Dumb Question: how to measure a..., Jerry
    • Re: [ATM] Dumb Question: how to measure a..., Woodchuck
      • Re: [ATM] Dumb Question: how to measure a..., Guy Brandenburg
    • Re: [ATM] Dumb Question: how to measure a..., Donald Good
  • Re: [ATM] Dumb Question: how to measure a..., Richard Ozer
  • Re: [ATM] Dumb Question: how to measure a..., Bob May
  • Re: [ATM] Dumb Question: how to measure a..., Malcolm Macdonald
    • Re: [ATM] Dumb Question: how to measure a..., Vladimir Galogaza
    • Re: [ATM] Dumb Question: how to measure a..., Woodchuck
      • Re: [ATM] Dumb Question: how to measure a..., hermit
      • Re: [ATM] Dumb Question: how to measure a..., Jerry Reddell
  • Re: [ATM] Dumb Question: how to measure a..., Don Clement
  • Re: [ATM] Dumb Question: how to measure a..., Richard
  • Re: [ATM] Dumb Question: how to measure a..., Don Clement
  • Re: [ATM] Dumb Question: how to measure a..., Kevin MIchael Zabbo
  • Re: [ATM] Dumb Question: how to measure a..., George Anderson
    • Re: [ATM] Dumb Question: how to measure a..., Mel Bartels
  • <Possible follow-ups>
  • Re: [ATM] Dumb Question: how to measure a..., Greg Jones
• [ATM] Edwin F. Bailey?, Matt Considine
• [ATM] Eyepiece repair / reassembly?, eheiny
• Re: [ATM] Figuring Methods, Mike Lockwood
  • Re: [ATM] Figuring Methods, Jerry
  • <Possible follow-ups>
  • Re: [ATM] Figuring Methods, Bob May
  • Re: [ATM] Figuring Methods, Jerry
• [ATM] Figuring question, lance clarke
  • Re: [ATM] Figuring question, Mike Lockwood
    • Re: [ATM] Figuring question, Jim Burrows
    • Re: [ATM] Figuring question, lance clarke
      • Re: [ATM] Figuring question, Mike Lockwood
      • Re: [ATM] Figuring question, lance clarke
      • Re: [ATM] Figuring question, Jerry
      • Re: [ATM] Figuring question, Jim Burrows
      • Re: [ATM] Figuring question, Mark Holm
      • Re: [ATM] Figuring question, Jerry
• [ATM] Film/CCD Slit - Test, Bill Thomas
  • <Possible follow-ups>
  • Re: [ATM] Film/CCD Slit - Test, Bill Thomas
• Re: [ATM] Fkex Mirror., Bob May
• Re: [ATM] Foucault and interferometry surface detail compared. Mirror two., Nils Olof Carlin
  • Re: [ATM] Foucault and interferometry surface detail compared. Mirror two., Michael Lindner
  • Re: [ATM] Foucault and interferometry surface detail compared. Mirror two., Mark Holm
    • Re: [ATM] Foucault and interferometry surface detailcompared. Mirror two., Bob May
• [ATM] Free 3D Design Software: Sketchup, Jason Hissong
• [ATM] full dedication, Saqib Sajjad
  • Re: [ATM] full dedication, Thomas Janstrom
  • Re: [ATM] full dedication, hermit
• [ATM] German Site, Richard F.L.R. Snashall
  • Re: [ATM] German Site, Richard
  • Re: [ATM] German Site, Bob May
    • [ATM] Quantifying roughness seen in Foucault, Dale Eason
      • Re: [ATM] Quantifying roughness seen in Foucault, Richard F.L.R. Snashall
• [ATM] Glass Slumping, Thomas A. Moulton
• [ATM] Global dimming, ntent
  • Re: [ATM] Global dimming, Daniel Fundo
  • Re: [ATM] Global dimming, KR
• [ATM] Got Stiction?, Don Clement
• [ATM] gregorian considerations, Douglas S Angle
  • Re: [ATM] gregorian considerations, Mike Lockwood
• Re: [ATM] Harry's 14-inch Sandwich Dob ready, Arjan te Marvelde
  • Re: [ATM] Harry's 14-inch Sandwich Dob ready, Bob May
  • <Possible follow-ups>
  • Re: [ATM] Harry's 14-inch Sandwich Dob ready, Arjan te Marvelde
    • Re: [ATM] Harry's 14-inch Sandwich Dob ready, Bob May
• [ATM] Hindle Machine, Gary Wolanski
• Re: [ATM] Hi resolution interferometry of mirror surface, Dominic-Luc Webb
  • Re: [ATM] Hi resolution interferometry of mirror surface, Jerry
    • Re: [ATM] Hi resolution interferometry of mirror surface, Jerry
• Re: [ATM] How to Reduce Bearing Friction, Arjan te Marvelde
  • Re: [ATM] How to Reduce Bearing Friction, Nils Olof Carlin
    • Re: [ATM] How to Reduce Bearing Friction EQ version, Kevin MIchael Zabbo
      • Re: [ATM] How to Reduce Bearing Friction EQ version, Nils Olof Carlin
      • Re: [ATM] How to Reduce Bearing Friction EQ version, Kevin MIchael Zabbo
    • Re: [ATM] How to Reduce Bearing Friction, Mark Holm
      • Re: [ATM] How to Reduce Bearing Friction, hermit
      • Re: [ATM] How to Reduce Bearing Friction, Mark Holm
    • Re: [ATM] How to Reduce Bearing Friction, Mark Holm
  • Re: [ATM] How to Reduce Bearing Friction, Donald Good
  • <Possible follow-ups>
  • Re: [ATM] How to Reduce Bearing Friction, Mark Holm
  • Re: [ATM] How to Reduce Bearing Friction, Vladimir Galogaza
• [ATM] Hydro-Stone and similar USG products available retail online from USG, Mark Holm
  • Re: [ATM] Hydro-Stone and similar USG products available retail online from USG, Jim
    • Re: [ATM] Hydro-Stone and similar USG products available retail online from USG, Richard
  • Re: [ATM] Hydro-Stone and similar USG products available retail online from USG, Jerry
• [ATM] Initial large thin mirror grinding question, Ralph
  • Re: [ATM] Initial large thin mirror grinding question, Mel Bartels
  • Re: [ATM] Initial large thin mirror grinding question, Bob May
  • Re: [ATM] Initial large thin mirror grinding question, Peter
  • <Possible follow-ups>
  • Re: [ATM] Initial large thin mirror grinding question, Hugues . Laroche
• [ATM] Is it possible?, Ralph
  • Re: [ATM] Is it possible?, Jerry
  • Message not available
    • Re: [ATM] Is it possible?, Mike Shuken
  • Re: [ATM] Is it possible?, Bob May
• [ATM] Look for meniscus parameters of Meade LX200 7" Maksutov-Cassegrain?, Goering, Peter
  • Re: [ATM] Look for meniscus parameters of Meade LX200 7"Maksutov-Cassegrain?, vladimir sacek
• [ATM] New web pages, Mike Lockwood
  • Re: [ATM] New web pages, Richard
• [ATM] (no subject), Tony Owens
  • Re: [ATM] (no subject), Mel Bartels
  • Re: [ATM] (no subject), Bob May
• Re: [ATM] Null_test_sphérique_wainéo, John Sherman
  • <Possible follow-ups>
  • Re: [ATM] Null_test_sphérique_wainéo, John Sherman
• [ATM] OT: increasing mpg, Don Clement
  • [ATM] Null test sphérique wainéo, laurence vincent
    • Re: [ATM] Null test sphérique wainéo, Bob May
  • Re: [ATM] OT: increasing mpg, Richard
    • Re: [ATM] OT: increasing mpg, Bob May
  • Re: [ATM] OT: increasing mpg, Bob May
  • Re: [ATM] OT: increasing mpg, Don D'Egidio
    • Re: [ATM] OT: increasing mpg, Alan Scott
  • <Possible follow-ups>
  • Re: [ATM] OT: increasing mpg, jpritchett
    • Re: [ATM] OT: increasing mpg, Bruce MacDonald
      • Re: [ATM] OT: increasing mpg, Michael Lindner
      • Re: [ATM] OT: increasing mpg, George Anderson
      • Re: [ATM] OT: increasing mpg, Bob May
  • Re: [ATM] OT: increasing mpg, John Sherman
    • Re: [ATM] OT: increasing mpg, Don Clement
  • Re: [ATM] OT: increasing mpg, John Sherman
    • Re: [ATM] OT: increasing mpg, Michael Lindner
• [ATM] Petzval, Richard F.L.R. Snashall
• [ATM] PGT reproductions, Jeff Lowe
• [ATM] Polishing action, David Clark
  • Re: [ATM] Polishing action, Mel Bartels
• [ATM] Polishing / Figuring Simulator, Martin Cibulski
  • <Possible follow-ups>
  • [ATM] Polishing / Figuring Simulator, Eric J. Shrader
• [ATM] Polishing / Figuring Simulator, Martin Cibulski
  • Re: [ATM] Polishing / Figuring Simulator, Richard
    • Re: [ATM] Polishing / Figuring Simulator, Donald Good
    • Re: [ATM] Polishing / Figuring Simulator, Richard
  • Re: [ATM] Polishing / Figuring Simulator, Bob May
  • Re: [ATM] Polishing / Figuring Simulator, tony gondola
  • Re: [ATM] Polishing / Figuring Simulator, Jim Burrows
    • [ATM] Burrows's RC Secondary was Re: Polishing / Figuring Simulator, James Lerch
      • Re: [ATM] Burrows's RC Secondary was Re: Polishing / Figuring Simulator, Jim Burrows
  • Re: [ATM] Polishing / Figuring Simulator, James Lerch
    • Re: [ATM] Polishing / Figuring Simulator, Jerry
      • Re: [ATM] Polishing / Figuring Simulator, James Lerch
      • Re: [ATM] Polishing / Figuring Simulator, Jerry
  • Re: [ATM] Polishing / Figuring Simulator, Mark Holm
    • Re: [ATM] Polishing / Figuring Simulator, Mike Lockwood
  • <Possible follow-ups>
  • Re: [ATM] Polishing / Figuring Simulator, Martin Cibulski
  • Re: [ATM] Polishing / Figuring Simulator, matt
    • Re: [ATM] Polishing / Figuring Simulator, Jerry
      • Re: [ATM] Polishing / Figuring Simulator, James Lerch
    • Re: [ATM] Polishing / Figuring Simulator, Attila Schné
      • Re: [ATM] Polishing / Figuring Simulator, Vladimir Galogaza
    • Re: [ATM] Polishing / Figuring Simulator, James Lerch
      • Re: [ATM] Polishing / Figuring Simulator, Mark Holm
    • Re: [ATM] Polishing / Figuring Simulator, Richard
      • Re: [ATM] Polishing / Figuring Simulator, Mark Holm
      • Re: [ATM] Polishing / Figuring Simulator, Richard
      • Re: [ATM] Polishing / Figuring Simulator, Mark Holm
      • Re: [ATM] Polishing / Figuring Simulator, Richard
  • Re: [ATM] Polishing / Figuring Simulator, Martin Cibulski
• [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, David Steinhauer
  • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Jerry
    • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Guy Brandenburg
      • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Vladimir Galogaza
      • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, tony gondola
    • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Mike Lockwood
      • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Jerry
      • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, hermit
  • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Guy Brandenburg
    • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, David Steinhauer
  • Re: [ATM] Polishing questions - stop polishing, keep polishing, or go back to fine grinding?, Bob May
• [ATM] posting test, William Marriott
  • Re: [ATM] posting test, hermit
• [ATM] Raised zone, mjlazo
  • Re: [ATM] Raised zone, Mark Holm
    • Re: [ATM] Raised zone, Bob May
    • Re: [ATM] Raised zone, Jim Burrows
  • Re: [ATM] Raised zone, mjlazo
    • Re: [ATM] Raised zone, Jerry
    • Re: [ATM] Raised zone, Mike Lockwood
  • Re: [ATM] Raised zone, mjlazo
    • Re: [ATM] Raised zone, Mike Lockwood
  • <Possible follow-ups>
  • Re: [ATM] Raised Zone, Meeks Robert-PT1784
• [ATM] smoothing the surface strange ronchi, newsforfred
  • <Possible follow-ups>
  • Re: [ATM] smoothing the surface strange ronchi, johncdeitz
• [ATM] source for mirrors/focusers/spiders, DU
  • Re: [ATM] source for mirrors/focusers/spiders, Bob May
• [ATM] Spider vane color?, Douglas Arion
  • Re: [ATM] Spider vane color?, Richard
    • Re: [ATM] Spider vane color?, Ross Sackett
  • Re: [ATM] Spider vane color?, Kevin MIchael Zabbo
  • Re: [ATM] Spider vane color?, Stan Truitt
  • Re: [ATM] Spider vane color?, Don Clement
    • Re: [ATM] Spider vane color?, Scott Ewart
      • Re: [ATM] Spider vane color? : Against the vane, Kevin MIchael Zabbo
      • Re: [ATM] Spider vane color? : Against the vane, tony gondola
    • Re: [ATM] Spider vane color?, Mel Bartels
  • Re: [ATM] Spider vane color?, Bob May
  • <Possible follow-ups>
  • Re: [ATM] Spider vane color?, NGC704
  • Re: [ATM] Spider vane color?, NGC704
  • Re: [ATM] Spider vane color?, John Sherman
    • Re: [ATM] Spider vane color?, Nils Olof Carlin
• [ATM] Star Test Interpretation, Tony Owens
  • Re: [ATM] Star Test Interpretation, Mel Bartels
  • <Possible follow-ups>
  • Re: [ATM] Star Test Interpretation, John Sherman
• [ATM] telescopes by Gerry Logan, Peter Abrahams
  • <Possible follow-ups>
  • Re: [ATM] telescopes by Gerry Logan, Randy Johnson
• [ATM] test, Gary Wolanski
• [ATM] Thank you, Ralph
• [ATM] Updated my website, again., Thomas Janstrom
• [ATM] Waineo GUI program, Richard
  • Re: [ATM] Waineo GUI program, Richard
• [ATM] Waineo test programmer, Mirroroptics
  • Re: [ATM] Waineo test programmer, Jean-Guy Moreau
  • Re: [ATM] Waineo test programmer, Mel Bartels
    • Re: [ATM] Waineo test programmer, Bob May
      • Re: [ATM] Waineo test programmer, Richard
      • Re: [ATM] Waineo test programmer, Richard
  • <Possible follow-ups>
  • Re: [ATM] Waineo test programmer, Rod Brackenridge
  • Re: [ATM] Waineo test programmer, laurence vincent
    • Re: [ATM] Waineo test programmer, laurence vincent
      • Re: [ATM] Waineo test programmer, Michael Lindner
      • Re: [ATM] Waineo test programmer, Stan Truitt
      • Re: [ATM] Waineo test programmer, Ken Hunter
      • [ATM] Harry's 14-inch Sandwich Dob ready, Stathis Kafalis
      • Re: [ATM] Harry's 14-inch Sandwich Dob ready, Peter
  • Re: [ATM] Waineo test programmer, Arjan te Marvelde
  • Re: [ATM] Waineo test programmer, laurence vincent
• [ATM] Widescan 30mm Type III, John Lynch
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data
• Re: [ATM] Null_test_sphérique_wainéo, laurence vincent