[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Hindle Machine

To: <atm@atmlist.net>
Subject: [ATM] Hindle Machine
From: "Gary Wolanski" <gary_wolanski@telus.net>
Date: Fri, 12 May 2006 10:45:21 -0700
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

 Atm's
A hindle grinding machine is looking for a good home with an ATM group or individual with experience making large thin mirrors. The machine does the usual grinding and polishing. In addition, figuring is done with a special attachment. Easily handles 24" mirrors. Includes flotation supports for 16" and 24" thin blanks. The machine is free and must be picked up in Vancouver BC Canada by the end of May. See link below 



http://www3.telus.net/gwolanski/HindleMachine.html

contact by phone only 604 253 0032 
_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: [ATM] test
Next by Author: Re: [ATM] OT: increasing mpg
Previous by thread: Re: [ATM] Harry's 14-inch Sandwich Dob ready
Next by thread: Re: [ATM] Hi resolution interferometry of mirror surface
Index(es):
- Author
- Thread