[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Polishing / Figuring Simulator

Hi Mark,

Wednesday, May 10, 2006, 2:50:51 AM, you wrote:

MH> Is that stress in the glass, or stress in the lap or pressure between.
MH> All of the above might be interesting, but not necessarily equivalent.

it's a three dimensional colour map, ie the colour at any
(x,y,z) is proportional to the stress at that point. I am
assuming (I think correctly..) that the colour at the surface is
indicative of the stress (PSI) at the surface.

-- 

Best regards,
  Richard in the UK

_______________________________________________
ATM mailing list http://www.atmlist.net/