[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] How to Reduce Bearing Friction

To: "ATM List" <atm@atmlist.net>
Subject: Re: [ATM] How to Reduce Bearing Friction
From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
Date: Sat, 6 May 2006 18:02:17 +0200
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <mailman.1.1146193200.28526.atm@atmlist.net> <000c01c66b00$84cbf950$0301a8c0@Acer>
Sender: atm-bounces@atmlist.net

>Using oil (don't know about wax) can decrease the CoF,

Temporarily though. Oily surface will retain dust and airborne particles
as pointed by Milton, and consequently change its properties (CoF) with
time.
Frequent cleaning and re-oiling may be required.
Not practical.

Regards
Vladimir.




-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.5.0/325 - Release Date: 26.4.2006

_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] Astrotracker Mk 2
Next by Author: Re: [ATM] Polishing / Figuring Simulator
Previous by thread: Re: [ATM] How to Reduce Bearing Friction
Next by thread: [ATM] Hydro-Stone and similar USG products available retail online from USG
Index(es):
- Author
- Thread