[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Coating removal

To: ATM List <atm@atmlist.net>
Subject: [ATM] Coating removal
From: Richard <cnc@cncservo.co.uk>
Date: Fri, 27 May 2005 14:13:08 +0100
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Reply-To: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi ATMers,

I have an old 8" mirror and would like to strip the coating off
it. It was Aluminised 35 years and probably Sio overcoated.
Coating is now tatty as you can imagine!.

Any recommendations for stripping the coating off please?

-- 
Best regards,
 Richard in the UK
 



_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Coating removal
  - From: "Robert Scholtz" <rscholtz01@comcast.net>

Prev by Author: Re[2]: [ATM] RE: Silicone Failure
Next by Author: Re: [ATM] Re:(ATM) coating removal
Prev by thread: [ATM] ATM: Re., re., re: Ball Bearings
Next by thread: Re: [ATM] Coating removal
Index(es):
- Author
- Thread