[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] RE: Silicone Failure

To: "Richard" <cnc@cncservo.co.uk>
Subject: Re: [ATM] RE: Silicone Failure
From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
Date: Thu, 26 May 2005 17:57:26 +0200
Cc: ATM List <atm@atmlist.net>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <4295E67A.8050206@pctcnet.net><1215998023.20050526163422@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

>Generalising, he sort of Silicon rubber that is based on acetic
>acid and obtainable in cartridges for sealing etc is good to
>about -50C/-58F. Two part Silicon RTV is good to -100C/-148F

I do not think that acetic acid based silicones are best thing to use on
metals.
This acid is highly corrosive.

Vladimir.




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 266.11.17 - Release Date: 25.5.2005

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] RE: Silicone Failure
  - From: "David Harbour" <scarab2@cox.net>
- RE: [ATM] RE: Silicone Failure
  - From: "mbyorick" <mbyorick@starband.net>
- Re[2]: [ATM] RE: Silicone Failure
  - From: Richard <cnc@cncservo.co.uk>

References:
- [ATM] RE: Silicone Failure
  - From: ntent <ntent@pctcnet.net>
- Re: [ATM] RE: Silicone Failure
  - From: Richard <cnc@cncservo.co.uk>

Prev by Author: [ATM] PE fault
Next by Author: Re: Re[2]: [ATM] RE: Silicone Failure
Prev by thread: Re: [ATM] RE: Silicone Failure
Next by thread: Re[2]: [ATM] RE: Silicone Failure
Index(es):
- Author
- Thread