[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] mirrors

To: <atm@atmlist.net>
Subject: [ATM] mirrors
From: "Cec & Cris" <ccabar@bigpond.com>
Date: Tue, 24 May 2005 20:08:54 +1000
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Hi everyone

My name is Cristian and I have just joined your group.
I'm in the process of grinding out a 250mm mirror(I'm up to the fine grinding stage) and I'm already looking into my next project. In Australia it's difficult to find mirror blanks, most come from overseas and cost a small fortune. Through your links I came across ASM products page and I was wondering if anybody out there had made mirrors using their products and if they hold their shape due to temperature changes. I want to make a 24 inch mirror.

regards Cristian
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] mirrors
  - From: "Bob May" <bobmay@nethere.com>
- Re: [ATM] mirrors
  - From: Richard Ozer <rozer@pacbell.net>
- Re: [ATM] mirrors
  - From: Richard Ozer <rozer@pacbell.net>
- RE: [ATM] mirrors
  - From: "Thomas" <tomjan@ozemail.com.au>

Prev by Author: RE: [ATM] Anything constructive?
Next by Author: [ATM] re Mirrors
Prev by thread: Re: [ATM] LWT setup questions
Next by thread: Re: [ATM] mirrors
Index(es):
- Author
- Thread