[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Hobby-Eberle Was Re: [ATM] ATM edge support

To: <atm@atmlist.net>
Subject: Re: Hobby-Eberle Was Re: [ATM] ATM edge support
From: "Bob May" <bobmay@nethere.com>
Date: Sun, 15 May 2005 11:36:57 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <003501c555aa$ffb5c130$0100a8c0@D85SJB21><02c601c558b5$236a48a0$31ecee04@DELL>
Sender: atm-bounces@atmlist.net

Since it is a spherical primary, how much of it is really used at a time
(vignetting by hte final optics is assummed here)?  I'd susect that the
detector section of the optical train moves during an image capture for fine
guiding.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: Hobby-Eberle Was Re: [ATM] ATM edge support
  - From: James P Crombie <jpcrombie@pei.eastlink.ca>

References:
- RE: [ATM] ATM edge support
  - From: "Jerry" <wa4guu@verizon.net>
- Re: Hobby-Eberle Was Re: [ATM] ATM edge support
  - From: "Scott Ewart" <scott.e@quicksurfer.com>

Prev by Author: Re: [ATM] re: Cutting 3/4" Plate glass
Next by Author: Re: [ATM] re: Cutting 3/4" Plate glass
Prev by thread: Re: Hobby-Eberle Was Re: [ATM] ATM edge support
Next by thread: Re: Hobby-Eberle Was Re: [ATM] ATM edge support
Index(es):
- Author
- Thread