Re: [ATM] re: Cutting 3/4" Plate glass

[Ken Hunter <atm_ken_hunter@yahoo.com>]

I now use a diamond edging wheel but after cutting off
all the corners (as close to the diameter as you can)
set the saw so that it is running at the diameter you
want just above the rotating glass and lower it
slowly. It will cut it round as can be! You will need
a rotating system of some sort. I had a 30 inch
grinding/generating machine that I made.

Ken Hunter


--- Jerry <jldove1@cableone.net> wrote:
> On Fri, 13 May 2005 19:40:56 -0700 (PDT), you wrote:
> 
> 
> 	Ken,
> 
> 	How do you cut a circle with a diamond saw blade?
> 
> >
> >Forgot to mention it also took a 20 pound tub of
> #60
> >which cost's more than the diamond saw did... Did
> that
> >10 years ago before I got smart!
> >
> 
> 


		
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html

_______________________________________________
ATM mailing list http://www.atmlist.net/