[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] ATM edge support

To: "'Richard'" <cnc@cncservo.co.uk>, "'The Alarm Co.'" <atm@atmlist.net>
Subject: RE: [ATM] ATM edge support
From: "Jerry" <wa4guu@verizon.net>
Date: Tue, 10 May 2005 17:55:33 -0400
Importance: Normal
In-reply-to: <548278274.20050510115050@cncservo.co.uk>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Probably corner to corner.

Jerry

-----Original Message-----
From: Richard
 
Hi,

Sorry, if you'd said HET I would have know the one you are
talking about. This is the mirror made of 91 hexagonal segments
with an effective diameter of 9.2m. I guess the 11m is the
extreme edge to edge dimension?

-- 

Best regards,
 Richard




_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- [ATM] looking for NEWT 2.5
  - From: Mike Shuken <mikeshuken@value.net>
- Re: Hobby-Eberle Was Re: [ATM] ATM edge support
  - From: "Scott Ewart" <scott.e@quicksurfer.com>

References:
- Re: [ATM] ATM edge support
  - From: Richard <cnc@cncservo.co.uk>

Prev by Author: RE: [ATM] WAS Magnalium....
Next by Author: Re: [ATM] re: Cutting 3/4" Plate glass
Prev by thread: Re: [ATM] ATM edge support
Next by thread: [ATM] looking for NEWT 2.5
Index(es):
- Author
- Thread