[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] First project

To: "Mark Hampton" <m5mdh@btopenworld.com>
Subject: Re: [ATM] First project
From: "Richard Ozer" <rozer@pacbell.net>
Date: Tue, 18 May 2004 10:46:03 -0700
Cc: "Mailing List: Amateur Telescope Makers" <ATM@atmlist.net>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <001e01c43cfd$1ca22f80$97f82bd9@mark>
Sender: atm-bounces@atmlist.net

8 or 10 inch is a good starting project.


----- Original Message ----- 
From: "Mark Hampton" <m5mdh@btopenworld.com>
To: "ATM list" <atm@atmlist.net>
Sent: Tuesday, May 18, 2004 10:25 AM
Subject: [ATM] First project


Hi all,
       I'm thinking about making my own telescope as the prices for the
various bits needed are fairly good, plus the satisfaction of making it.
I'm wondering what size of telescope was the first project that you tackled.

Thanks in advance, Mark
_______________________________________________
ATM mailing list http://www.atmlist.net/

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] First project
  - From: "Mark Hampton" <m5mdh@btopenworld.com>

Prev by Author: Re: [ATM] (no subject)
Next by Author: Re: [ATM] First project
Prev by thread: Re: [ATM] First project
Next by thread: Re: [ATM] First project
Index(es):
- Author
- Thread