[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Refractor Baffle Question

To: "atml" <atm@atmlist.net>
Subject: Re: [ATM] Refractor Baffle Question
From: "Bob May" <bobmay@nethere.com>
Date: Mon, 3 May 2004 12:55:21 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <000d01c430bd$1f837e80$16d472d8@billz9boj51iza>
Sender: atm-bounces@atmlist.net

One of the flatter paints available is the Krylon Ultra Flat Black paint.
The baffles are easy to figure on a refractor as you just draw up a picture
of the inside of the scope with the objective diameter at one end of the
tube and the focuser diameter at the other end of the tube and you then
start putting baffles in there to the diameter that is needed.  There is a
website that goes through the details of where to place the baffles and why.
I don't remember the site name but a bit of googling will find it.
Bob May
http://nav.to/bobmay
bobmay@nethere.com
NEW! http://bobmay.astronomy.net


_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Refractor Baffle Question
  - From: "Bill & Becky" <wmarvin@hickorytech.net>

Prev by Author: Re: [ATM] Which stroke ?
Next by Author: Re: [ATM] Which stroke ?
Prev by thread: Re: [ATM] Refractor Baffle Question
Next by thread: [ATM] Ronchi testing
Index(es):
- Author
- Thread