Re: ATM Coating Silver?

["at making" <atmaking@hotmail.com>]

Hi,

The silver coating was really not strong at all. Is reflectivity was good 
but it did not last for long.

Frédéric Géa
http://astrosurf.com/altaz/index_e.htm


>From: Raphaël Guinamard <rguinamard@infonie.fr>
>Reply-To: Raphaël Guinamard <rguinamard@infonie.fr>
>To: <Hugues.Laroche@ses-astra.com>,"Bawden,Michael" 
><Michael.Bawden@spr.gases.boc.com>
>CC: <atm@shore.net>,<owner-atm@shore.net>
>Subject: Re: ATM Coating Silver?
>Date: Sat, 10 May 2003 00:17:19 +0200
>
>
>This French company doesn't do anymore silver coating, but I don't know
>exactly why. I know they 've had problem with longevity....maybe that's the
>reason...?
>There is also an Italian company that make silvered mirror. The protection
>is MgF2. The optician told me he doesn't know exactly how long it last, but
>he thinks it last less than Aluminium coating.
>Raphaël Guinamard
>----- Original Message -----
>From: <Hugues.Laroche@ses-astra.com>
>To: Bawden,Michael <Michael.Bawden@spr.gases.boc.com>
>Cc: <atm@shore.net>; <owner-atm@shore.net>
>Sent: Friday, May 09, 2003 9:47 AM
>Subject: Re: ATM Coating Silver?
>
>
>
>
>Hi Michael,
>
> >>>
>I  am about to finish polishing and after inquiring about aluminium
>coating
>here in  Brisbane ($380 for 10"!!) I am looking at doing a silver coat
>instead.
>My  question is, Can the protective coatings they use on aluminium be put
>over the  silver as I assume it is not an electrically driven process in
>a vacuum  chamber?
><<<
>
>In France a company proposes also protected silver. Done in vacuum
>as for standard Al, as far as I know.
>I recently *heard* however that the longevity is quite shorter than std
>aluminium.
>And, in any case all their coatings are horribly expensive! On the other
>hand,
>even here in Europe $380 to coat a 10" seems much!
>
>Frédéric, do you wish to comment further?
>
>Hugues Laroche
>Luxembourg, Europe
>
>
>
>
>--
>DISCLAIMER:
>This e-mail contains proprietary information some or all of which may be
>legally privileged. It is for the intended recipient only. If an addressing
>or transmission error has misdirected this e-mail, please notify the author
>by replying to this e-mail. If you are not the intended recipient you must
>not use, disclose, distribute, copy, print, or rely on this e-mail.
>
>
>
>
>

_________________________________________________________________
Téléchargez gratuitement MSN Messenger ! http://www.msn.fr/msger/default.asp