[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?

To: "ATM List" <atm@atmlist.net>
Subject: Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
From: "Chris Todd" <christopher.todd@gmail.com>
Date: Mon, 17 Mar 2008 21:15:08 -0400
Delivered-to: atm_arc@astro.umsystem.edu
In-reply-to: <005b01c88869$e234e4c0$6800a8c0@donaldp4>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <8cb754430803171008h22870bfeib1ba5e29659b7ce8@mail.gmail.com> <005b01c88869$e234e4c0$6800a8c0@donaldp4>
Sender: atm-bounces@atmlist.net

Don,

Sorry, you're right.  The walls of the tubing are 3/64" thick, so the
I.D. is 13/32".  As for screws, I'm very flexible, I could use 1/4-20,
or 10-24, or pretty much anything I can get from bob's knobs.

Chris

On Mon, Mar 17, 2008 at 4:02 PM, Don D'Egidio <djd521@comcast.net> wrote:
> Chris,
>
>  You could mention what the ID of the tubes are and the size of the screw you want to use.
>
>  Don
>
>
>
_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Threaded inserts for 1/2" carbon fiber tube?
  - From: "Chris Todd" <christopher.todd@gmail.com>
- Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  - From: "Don D'Egidio" <djd521@comcast.net>

Prev by Author: [ATM] Threaded inserts for 1/2" carbon fiber tube?
Next by Author: Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
Previous by thread: Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
Next by thread: Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
Index(es):
- Author
- Thread