Amateur Telescope Makers (ATM) Archive for MAR08 - by author

• Thread Index

• Re: [ATM] Exit pulil and brightnees
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Exit pulil and brightnees
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Exit pulil and brightnees
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Exit pupil and brightness
  • From: Alexis Cousein <al@sgi.com>
• Re: [ATM] Exit pupil and alien binocs: a little OT
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] please help with mirror cell design
  • From: "Anthony Owens" <towens@shibumi-consulting.net>
• Re: [ATM] Exit pupil and brightness
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• [ATM] PLOP installer
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] PLOP installer
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Arjan te Marvelde" <Arjan.te.Marvelde@hetnet.nl>
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: "Arjan te Marvelde \(hetnet\)" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Odd question...
  • From: "Arjan te Marvelde \(hetnet\)" <arjan.te.marvelde@hetnet.nl>
• [ATM] Test Message
  • From: "ATM_Wes" <atm_wes@sbcglobal.net>
• [ATM] Final figuring advice?
  • From: BERNARD KOSICKI <kosicki@verizon.net>
• Re: [ATM] Exit pulil and brightnees
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] [BULK] Re: Exit pulil and brightnees
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Exit pupil and brightness
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] PLOP installer
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Astig. due to gravity
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Pencil Test/Sphere
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Astig. due to gravity
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Astig. due to gravity
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grinding Flat
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] how to fix a zone and understanding small tool action
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Saturn's moons
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] schmidt Correctors
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] schmidt Correctors
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] spherometer
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] hogging with diamonds
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] How Much Pitch for 12"?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Push Pull Lens Cells
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Final figuring advice?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] perfect foucault results
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] perfect foucault results
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] industrial polishing pads?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Polishing pads
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] industrial polishing pads?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Barnesite \ Re: industrial polishing pads?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Odd question...
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Odd question...
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Odd question...
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] galvanized plumbing pipe rather than welding?
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] please help with mirror cell design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] please help with mirror cell design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Baffles in a Complex Design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] please help with mirror cell design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] ATM Digest, Vol 51, Issue 36
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Grinding/ Polishing slumped blank
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Amount of Under Correction??
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Improving my focault tester / testing skills
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Charles Broward <broward32666@yahoo.com>
• [ATM] Grinding Flat
  • From: Che Ers <yaar92@yahoo.com>
• [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: "Chris Todd" <christopher.todd@gmail.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: "Chris Todd" <christopher.todd@gmail.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: "Chris Todd" <christopher.todd@gmail.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] Cleaning up pitch
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] how to fix a zone and understanding small tool action
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Figuring with helpof interferometry
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] please help with mirror cell design
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Mirror Cell suggestions
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] stainless ball bearings
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] please help with mirror cell design
  • From: Dave and Connie <dmatt@frontiernet.net>
• Re: [ATM] industrial polishing pads?
  • From: "Dave McCarter" <dmccarter@sympatico.ca>
• Re: [ATM] a lightweight 12' "hat box" travel dob, 20 pounds.
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] stainless ball bearings
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] ATM: Some articles that may help you Bernard-
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] ATM: Cannot reply to "Gateway" email. see below, Please
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] perfect foucault results
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] ATM: Try one of these three, guys. Time tested; bullett proof.
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Baffles in a Complex Design
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Baffles in a Complex Design
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Baffles in a Complex Design
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] ATM: Got to sign off, all. Got to go to a doc;
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] ATM: Replies by "Gateway"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Fw: Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• [ATM] Fw: Re: ATM: Replies by "Gateway"
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing pads
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Barnesite \ Re: industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Odd question...
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Odd question...
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] stainless ball bearings
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] stainless ball bearings
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: "David Harbour" <stainless_steel@suddenlink.net>
• Re: [ATM] Schmidt Correctors
  • From: "David Rowe" <lists@starryridge.com>
• [ATM] Test Message -- Please ignore
  • From: "David Rowe" <atmlist@starryridge.com>
• Re: [ATM] Exit pulil and brightnees
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Grinding Flat
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] industrial polishing pads?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] industrial polishing pads?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] industrial polishing pads?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] ATM: Replies by "Gateway"
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] Barnesite \ Re: industrial polishing pads?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] please help with mirror cell design
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] please help with mirror cell design
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Cleaning up pitch
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Cleaning up pitch
  • From: David Weinshenker <daze39@earthlink.net>
• [ATM] A new Big 21" Dob
  • From: "dobson 2005" <dobson.2005@gmail.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] {Spam?} schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] {Spam?} schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] How Much Pitch for 12"?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] schmidt Correctors
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Polishing pads
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] industrial polishing pads?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] industrial polishing pads?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Odd question...
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] stainless ball bearings
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Improving my focault tester/testing skills
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Odd question...
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• [ATM] Fw: Polishing pads
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• Re: [ATM] ATM Digest, Vol 51, Issue 36
  • From: "Edwin Feuer" <jepennygirl@cfl.rr.com>
• [ATM] Improving my focault tester / testing skills
  • From: Emil Johnsen <emil@lei-en-nerd.no>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Emil Johnsen <emil@lei-en-nerd.no>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Emil Johnsen <emil@lei-en-nerd.no>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Emil Johnsen <emil@lei-en-nerd.no>
• Re: [ATM] Exit pupil and brightness
  • From: "Everett Cairns" <ecairns@mcmaster.ca>
• Re: [ATM] Exit pupil and brightness
  • From: "Everett Cairns" <ecairns@mcmaster.ca>
• [ATM] vacuum pump
  • From: "Everett Cairns" <ecairns@mcmaster.ca>
• [ATM] vacuum pump
  • From: "Everett Cairns" <ecairns@mcmaster.ca>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Pencil test /Sphere
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] COG of a Parabolic Mirror: Let the computer do the work...
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Saturn's moons
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] prices
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Thank you for your videos!!
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] perfect foucault results
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Fw: Giant Telescopes
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Polishing pads
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Spectroscope
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] ATM Digest, Vol 51, Issue 36
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Solvent's and Liver damage
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] polishing with a sub diameter lap
  • From: "Frans Franssen" <f.franssen@planet.nl>
• Re: [ATM] Push Pull Lens Cells
  • From: fundo@bellsouth.net
• Re: [ATM] Baffles in a Complex Design
  • From: fundo@bellsouth.net
• Re: [ATM] industrial polishing pads?
  • From: fundo@bellsouth.net
• Re: [ATM] Graduation from ATM to ATM pro
  • From: fundo@bellsouth.net
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: fundo@bellsouth.net
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: fundo@bellsouth.net
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Gary Fuchs <gary@gfphoto.com>
• Re: [ATM] Quick question
  • From: Gary Fuchs <gary@gfphoto.com>
• [ATM] Exit pulil and brightnees
  • From: "George Nikolidakis" <geoniko@otenet.gr>
• Re: [ATM] Exit pulil and brightnees
  • From: "George Nikolidakis" <geoniko@otenet.gr>
• Re: [ATM] Exit pupil and brightness
  • From: "George Nikolidakis" <geoniko@otenet.gr>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "GFPhoto" <gary@gfphoto.com>
• Re: [ATM] spherometer
  • From: "GFPhoto" <gary@gfphoto.com>
• Re: [ATM] schmidt Correctors
  • From: G Gagne <gagne51@clearwire.net>
• Re: [ATM] galvanized plumbing pipe rather than welding?
  • From: G Gagne <gagne51@clearwire.net>
• Re: [ATM] Mirrors Coaters Near Toronto
  • From: "Gord Tulloch" <gord.tulloch@gmail.com>
• [ATM] astigmatism as seen via ronchi?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] prices
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] prices
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] our polishig machine
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] our polishig machine
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] industrial polishing pads?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] galvanized plumbing pipe rather than welding?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] galvanized plumbing pipe rather than welding?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] galvanized plumbing pipe rather than welding?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Betr.: 48" Dob at OMI
  • From: "Harro Treur" <Harro.Treur@waternet.nl>
• Re: [ATM] schmidt Correctors
  • From: hermit@outofoptions.org
• [ATM] spherometer
  • From: horace r davis <hrd9@juno.com>
• Re: [ATM] Quick question
  • From: Neil Booker <neil@astronomy.ndo.co.uk>
• Re: [ATM] Quick question
  • From: Neil Booker <neil@astronomy.ndo.co.uk>
• Re: [ATM] galvanized plumbing pipe rather than welding?
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] Exit puoil and brightness
  • From: James Gort <jgort@oxford-observatory.org>
• Re: [ATM] Exit pulil and brightnees
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Exit pulil and brightnees
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Exit pulil and brightnees
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Exit pulil and brightnees
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Exit pupil and brightness
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Exit pupil and alien binocs: a little OT
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Odd question...
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Grinding/ Polishing slumped blank
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] 48" Dob at OMI
  • From: "jcmulherin" <jcmulherin@opticalmechanics.com>
• Re: [ATM] Mirrors Coaters Near Toronto
  • From: "Jean Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] ATM] Pencil Test/Sphere
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] perfect foucault results
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] perfect foucault results
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] COG of mirror - was astigmatism as seen via ronchi?
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Astig. due to gravity
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Spherometer & Hogging with Diamonds
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] perfect foucault results
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Polishing pads
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] stainless ball bearings
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] ATM Digest, Vol 51, Issue 2; a lightweight 12' "hat box" travel dob, 20 pounds
  • From: "Joe Johnson" <jjohnson1253@hotmail.com>
• Re: [ATM] Industrial polishing pads?
  • From: "Joe Johnson" <jjohnson1253@hotmail.com>
• Re: [ATM] please help with mirror cell design
  • From: "Joe Johnson" <jjohnson1253@hotmail.com>
• Re: [ATM] URL for old telescope catalogs
  • From: John Lynch <john_lynch2007@yahoo.com>
• [ATM] URL for old telescope catalogs
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] Exit pulil and brightnees
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] how to fix a zone and understanding small tool action
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Grinding Flat
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] schmidt Correctors
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] stainless ball bearings
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Odd question...
  • From: "Khail Rosenberg" <mikhail.rosenberg@rosenbergtelescopes.com>
• Re: [ATM] Odd question...
  • From: KR <kmreid1@shaw.ca>
• Re: [ATM] Odd question...
  • From: KR <kmreid1@shaw.ca>
• Re: [ATM] Exit pulil and brightnees
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] URL for old telescope catalogs
  • From: <lenses@adelphia.net>
• [ATM] URL Instruments for Science 1800-1914
  • From: <lenses@adelphia.net>
• Re: [ATM] spherometer
  • From: <lenses@adelphia.net>
• Re: [ATM] industrial polishing pads?
  • From: <lenses@adelphia.net>
• Re: [ATM] Saturn's moons
  • From: "Marco" <marco.miglionico@btinternet.com>
• Re: [ATM] Exit pulil and brightnees
  • From: Marinus van der Lugt <lugt@xs4all.nl>
• Re: [ATM] Exit pulil and brightnees
  • From: Marinus van der Lugt <lugt@xs4all.nl>
• Re: [ATM] Exit pulil and brightnees
  • From: Marinus van der Lugt <lugt@xs4all.nl>
• [ATM] how to fix a zone and understanding small tool action
  • From: "Mark Yama" <myama@uidaho.edu>
• Re: [ATM] Schmidt Correctors
  • From: Matt Considine <matt@considine.net>
• Re: [ATM] Exit pulil and brightnees
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Exit pulil and brightnees
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Amount of Under Correction??
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Pencil Test/Sphere
  • From: michael dodge <michaeldodge9@hotmail.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: michael dodge <michaeldodge9@hotmail.com>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] polishing with a sub diameter lap
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Final figuring advice?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] industrial polishing pads?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] industrial polishing pads?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Amount of Under Correction??
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Improving my focault tester / testing skills
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] Astig. due to gravity
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] Astig. due to gravity
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] stainless ball bearings
  • From: Mitch_Bisnauth@Cknainc.com
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Astig. due to gravity
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Final figuring advice?
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] industrial polishing pads?
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Graduation from ATM to ATM pro
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] industrial polishing pads?
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] industrial polishing pads?
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] OH (that word again)
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] OH (that word again)
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] OH (that word again)
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] OH (that word again)
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• [ATM] Quick question
  • From: "Neil Booker" <neil@astronomy.ndo.co.uk>
• Re: [ATM] Exit pulil and brightnees
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] Exit pulil and brightnees
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] COG of mirror - was astigmatism as seen via ronchi?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] perfect foucault results
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Tool surface medium
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Mirror Cell suggestions
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Cleaning up pitch
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Cleaning up pitch
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] please help with mirror cell design
  • From: "Olivier Biot" <olivier.biot@gmail.com>
• [ATM] Spherometer & Hogging with Diamonds
  • From: pauldkline@aol.com
• [ATM] Hogging with Diamonds
  • From: pauldkline@aol.com
• Re: [ATM] Exit pupil and brightness
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• [ATM] perfect foucault results
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• Re: [ATM] perfect foucault results
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• Re: [ATM] Industrial polishing pads
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• [ATM] Improving my focault tester/testing skills
  • From: "Paul Foreman" <pforeman@wideopenwest.com>
• [ATM] Mirrors Coaters Near Toronto
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Mirrors Coaters Near Toronto
  • From: "Peter" <peter@kitgear.com>
• [ATM] Amount of Under Correction??
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Amount of Under Correction??
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] OH (that word again)
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] a lightweight 12' "hat box" travel dob, 20 pounds.
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] COG of mirror - was astigmatism as seen via ronchi?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] astigmatism as seen via ronchi?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Figuring with helpof interferometry
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Baffles in a Complex Design
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] industrial polishing pads?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] industrial polishing pads?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Barnesite \ Re: industrial polishing pads?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] please help with mirror cell design
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] Small Petzval
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Reuse
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] schmidt Correctors
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Thank you for your videos!!
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Baffles in a Complex Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] industrial polishing pads?
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] industrial polishing pads?
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Baffles in a Complex Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Baffles in a Complex Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Baffles in a Complex Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] COG of a Parabolic Mirror: Let the computer do the work...
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] COG of a Parabolic Mirror: Let the computer do the work...
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Exit pupil and alien binocs: a little OT
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] industrial polishing pads?
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• [ATM] Exit pupil and alien binocs: a little OT
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Exit pupil and alien binocs: a little OT
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: <rozer@pacbell.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: <rozer@pacbell.net>
• Re: [ATM] Push Pull Lens Cells
  • From: <rozer@pacbell.net>
• Re: [ATM] Push Pull Lens Cells
  • From: <rozer@pacbell.net>
• [ATM] Astigmatizm, and pitch adhesion..
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Astig. due to gravity
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Polishing pads
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Graduation from ATM to ATM pro
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Nuc Reactors
  • From: Russell Jocoy <russjocoy@hotmail.com>
• [ATM] Solvent's and Liver damage
  • From: Russell Jocoy <russjocoy@hotmail.com>
• Re: [ATM] Astig. due to gravity
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Astig. due to gravity
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] industrial polishing pads?
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] schmidt Correctors
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] flipping and rotating Zernike coefficients
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Figuring with helpof interferometry
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Figuring with helpof interferometry
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Mirror Cell suggestions
  • From: "Steve" <gsv987@mailshack.com>
• [ATM] schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• Re: [ATM] {Spam?} schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• Re: [ATM] schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• Re: [ATM] schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• Re: [ATM] schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• Re: [ATM] Schmidt Correctors
  • From: Steve Renden <stevey0303@yahoo.com>
• [ATM] please help with mirror cell design
  • From: "Ted Cohen" <tcohen@blakeglobal.com>
• Re: [ATM] please help with mirror cell design
  • From: "Ted Cohen" <tcohen@blakeglobal.com>
• Re: [ATM] Mirror Cell suggestions
  • From: "Ted Cohen" <tcohen@blakeglobal.com>
• Re: [ATM] Solvent's and Liver damage
  • From: "Ted Cohen" <tcohen@blakeglobal.com>
• [ATM] How Much Pitch for 12"?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• [ATM] Push Pull Lens Cells
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] How Much Pitch for 12"?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] ATM: "Fortune favors the bold"
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] ATM Digest, Vol 51, Issue 36
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Cleaning up pitch
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Cleaning up pitch
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Barnesite Re: industrial polishing pads?
  • From: tillerman1@videotron.ca
• Re: [ATM] Threaded inserts for 1/2" carbon fiber tube?
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• [ATM] Polishing /Figuring a Slumped Blank
  • From: Ulhas Deshpande <dulhas2001@yahoo.com>
• Re: [ATM] ATM Digest, Vol 51, Issue 36
  • From: Ulhas Deshpande <dulhas2001@yahoo.com>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: Ulhas Deshpande <dulhas2001@yahoo.com>
• Re: [ATM] Grinding/ Polishing slumped blank
  • From: Ulhas Deshpande <dulhas2001@yahoo.com>
• Re: [ATM] Polishing /Figuring a Slumped Blank
  • From: Ulhas Deshpande <dulhas2001@yahoo.com>
• [ATM] Pitch does not stick to dental stone tool
  • From: "vaasanthe" <vaasanthe@gmail.com>
• Re: [ATM] Grinding tips (was Pencil Test/Sphere)
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• [ATM] Figuring with helpof interferometry
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Odd question...
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Odd question...
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] COG of mirror - was astigmatism as seen via ronchi?
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] please help with mirror cell design
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Cleaning up pitch
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Pitch does not stick to dental stone tool
  • From: William Marriott <bmarriott@pacbell.net>