Amateur Telescope Makers (ATM) Archive for MAR07 - by thread

• Author Index

• [ATM] 150 mm f/8 Refractor, Richard F.L.R. Snashall
• [ATM] 35 mm Camera Lens, Richard F.L.R. Snashall
• [ATM] Abrasive grades before polishing, Russell Jocoy
  • Re: [ATM] Abrasive grades before polishing, Richard
• [ATM] Abrasives, Francis J. O'Reilly
  • Re: [ATM] Abrasives, Mitch
    • Re: [ATM] Abrasives, Mel Bartels
      • Re: [ATM] Abrasives, Thomas A. Moulton
      • Re: [ATM] Abrasives, Mel Bartels
      • Re: [ATM] Abrasives, Thomas Janstrom
      • Re: [ATM] Abrasives, Michael Lindner
      • Re: [ATM] Abrasives, Thomas Janstrom
  • <Possible follow-ups>
  • Re: [ATM] Abrasives, John Lynch
    • Re: [ATM] Abrasives, Mel Bartels
      • Re: [ATM] Abrasives, Mike Lockwood
  • Re: [ATM] Abrasives, Kowalski, Mark S
    • Re: [ATM] Abrasives, Thomas A. Moulton
    • Re: [ATM] Abrasives, Mitch
      • Re: [ATM] Abrasives, Michael Lindner
      • Re: [ATM] Abrasives, KR
      • Re: [ATM] Abrasives, Dominic-Luc Webb
    • Re: [ATM] Abrasives, Dominic-Luc Webb
      • Re: [ATM] Abrasives, Richard
• [ATM] Arizona ATM yard sale, Bill Kelley
• Re: [ATM] ATM Digest, Vol 39, Issue 25, Arjan te Marvelde
  • Re: [ATM] ATM Digest, Vol 39, Issue 25, Jan van Gastel
• Re: [ATM] ATM Digest, Vol 39, Issue 28, Arjan te Marvelde
• Re: [ATM] ATM Digest, Vol 39, Issue 5, RICHARD GRIMALDI, M.D.
• Re: [ATM] BEESWAX....Creation of an old lap substance...., Dominic-Luc Webb
  • Re: [ATM] BEESWAX....Creation of an old lap substance...., Bernard Maugoust
• Re: [ATM] Cassegrain, primary mirror perforation size, Heiner Otterstedt
  • Re: [ATM] Cassegrain, primary mirror perforation size, Richard
    • Re: [ATM] Cassegrain, primary mirror perforation size, Heiner Otterstedt
  • Re: [ATM] Cassegrain, primary mirror perforation size, Michael Peck
• [ATM] Chabot Recollection, Stan Truitt
  • <Possible follow-ups>
  • Re: [ATM] Chabot Recollection, Stan Truitt
    • Re: [ATM] Chabot Recollection, John Lynch
• [ATM] Diffraction Assisted Figure Test, Arjan te Marvelde
  • Re: [ATM] Diffraction Assisted Figure Test, Jim Burrows
  • <Possible follow-ups>
  • Re: [ATM] Diffraction Assisted Figure Test, Arjan te Marvelde
    • Re: [ATM] Diffraction Assisted Figure Test, Dale Eason
• [ATM] f/15 Doublets, Richard F.L.R. Snashall
• [ATM] Figuring flats, Philip Lardner
  • Re: [ATM] Figuring flats, Norm Prince
  • Re: [ATM] Figuring flats, Philip Lardner
    • [ATM] new wire spider and ring again, Jan van Gastel
  • <Possible follow-ups>
  • Re: [ATM] Figuring flats, Philip Lardner
    • Re: [ATM] Figuring flats, Mike Lockwood
• Re: [ATM] Finder, Richard
  • Re: [ATM] Finder, Richard F.L.R. Snashall
  • Re: [ATM] Finder, Richard F.L.R. Snashall
  • Re: [ATM] Finder, Richard F.L.R. Snashall
    • Re: [ATM] Finder, Richard
      • Re: [ATM] Finder, Richard F.L.R. Snashall
• [ATM] Fine Grind already Blanchard ground mirror blank back?, Michael Fremont
  • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, hermit
    • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Shane LaPierre
  • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Mike Lockwood
    • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Tom Wicker
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Richard
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, John Lynch
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Mike Lockwood
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Jerry
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Guy Brandenburg
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Mitch
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Jerry
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, Dominic-Luc Webb
      • Re: [ATM] Fine Grind already Blanchard ground mirror blank back?, John Sherman
  • <Possible follow-ups>
  • [ATM] Fine Grind already Blanchard ground mirror blank back?, Bob Drew
• [ATM] Finished fine grinding, Francis J. O'Reilly
• Re: [ATM] First time, Francis J. O'Reilly
• [ATM] Foucault software, Jonathan Lavoie
  • Re: [ATM] Foucault software, Jim Burrows
• [ATM] FOV by design: An iterative process?, Dominic-Luc Webb
  • Re: [ATM] FOV by design: An iterative process?, Richard
  • Re: [ATM] FOV by design: An iterative process?, James Lerch
• [ATM] Fringe XP and flats, Philip Lardner
  • Re: [ATM] Fringe XP and flats, Stephen Koehler
    • Re: [ATM] Fringe XP and flats, Dominic-Luc Webb
      • Re: [ATM] Fringe XP and flats, Philip Lardner
    • Re: [ATM] Fringe XP and flats, Stephen Koehler
      • Re: [ATM] Fringe XP and flats, Philip Lardner
• [ATM] Fwd: Re: Fine Grind already Blanchard ground mirror blank back?, John Lynch
  • Re: [ATM] Fwd: Re: Fine Grind already Blanchard ground mirror blank back?, Thomas Rutherford
• [ATM] FW: Figuring flats, Philip Lardner
  • Re: [ATM] FW: Figuring flats, Mike Lockwood
    • Message not available
      • Message not available
      • Re: [ATM] FW: Figuring flats, Vladimir Galogaza
      • Message not available
      • Re: [ATM] FW: Figuring flats, Vladimir Galogaza
      • Re: [ATM] FW: Figuring flats, Philip Lardner
      • Re: [ATM] FW: Figuring flats, Mike Lockwood
      • Re: [ATM] FW: Figuring flats, Philip Lardner
      • Re: [ATM] FW: Figuring flats, Mike Lockwood
      • Re: [ATM] FW: Figuring flats, Mitch
    • Re: [ATM] FW: Figuring flats, Philip Lardner
• [ATM] General questions before getting starting on a 6F6., Anthony Anconetani
  • Re: [ATM] General questions before getting starting on a 6F6., Mike Lockwood
    • Re: [ATM] General questions before getting starting on a 6F6., Anthony Anconetani
      • Re: [ATM] General questions before getting starting on a 6F6., Mike Lockwood
• [ATM] German equatorial mount, Francis J. O'Reilly
• [ATM] Ghosts, Richard F.L.R. Snashall
  • Re: [ATM] Ghosts, Richard F.L.R. Snashall
• [ATM] grinding questions, Bill and Dorothy Morgan
• [ATM] help with hogging, worm
  • Re: [ATM] help with hogging, Dale Eason
  • <Possible follow-ups>
  • [ATM] help with hogging, worm
    • Re: [ATM] help with hogging, Norm Prince
• [ATM] Help with TDE, Hannes van Niekerk
  • Re: [ATM] Help with TDE, Mike Lockwood
• Re: [ATM] Herschelian MMT, Mike Carambat
  • Re: [ATM] Herschelian MMT, vladimir sacek
• [ATM] Herschelian MMT (neat idea?), Mike Carambat
  • Re: [ATM] Herschelian MMT (neat idea?), Jerry
  • Re: [ATM] Herschelian MMT (neat idea?), vladimir sacek
• [ATM] How do I test a convex surface?, Christopher Dalla Piazza
  • Re: [ATM] How do I test a convex surface?, Dominic-Luc Webb
    • Re: [ATM] How do I test a convex surface?, Chris Dalla Piazza
      • Re: [ATM] How do I test a convex surface?, Jerry
      • Re: [ATM] How do I test a convex surface?, Dominic-Luc Webb
      • Re: [ATM] How do I test a convex surface?, Dominic-Luc Webb
  • Re: [ATM] How do I test a convex surface?, Guy Brandenburg
    • Re: [ATM] How do I test a convex surface?, Chris Dalla Piazza
  • Re: [ATM] How do I test a convex surface?, Richard
  • <Possible follow-ups>
  • Re: [ATM] How do I test a convex surface?, Peter John Smith
    • Re: [ATM] How do I test a convex surface?, Dominic-Luc Webb
  • Re: [ATM] How do I test a convex surface?, Alfredo Rainho Neves
• [ATM] Just starting out, Gerald Clay
  • Re: [ATM] Just starting out, Mel Bartels
  • Re: [ATM] Just starting out, Norm Prince
    • [ATM] OpenFringe and mirror surface simulation program, Dale Eason
  • <Possible follow-ups>
  • Re: [ATM] Just starting out, Jarvis Krumbein
    • [ATM] Large aluminum tubes, Dan Lago
      • Re: [ATM] Large aluminum tubes, Gregg Swanson
• Re: [ATM] Large Aluminum Tubes, Jack.Swaton@starryhost.com
  • <Possible follow-ups>
  • Re: [ATM] Large aluminum tubes, Hugues . Laroche
• [ATM] Make A Barlowed Laser Collimator?, RodShea
  • Re: [ATM] Make A Barlowed Laser Collimator?, Scott Ewart
• [ATM] Making Barlows, Anthony Anconetani
  • Re: [ATM] Making Barlows, Robert Mohr
  • Re: [ATM] Making Barlows, Jerry P. Reddell
    • Re: [ATM] Making Barlows, Richard Ozer
  • <Possible follow-ups>
  • Re: [ATM] Making Barlows, Jarvis Krumbein
• Re: [ATM] Metric mirror, Don Clement
• Re: [ATM] Mirror Tester, Mahmood Hassan
• [ATM] New project, Francis J. O'Reilly
  • Re: [ATM] New project, Mike Lockwood
    • Re: [ATM] New project, Francis J. O'Reilly
• [ATM] New Tool?, John K. LaShell
  • Message not available
    • Re: [ATM] [offlist] New Tool?, John K. LaShell
• [ATM] Next part of the project, Francis J. O'Reilly
  • Re: [ATM] Next part of the project, Richard
  • Re: [ATM] Next part of the project, Jerry
• [ATM] No meeting tonight, Mark
  • Re: [ATM] No meeting tonight, Norm Prince
• [ATM] No meeting tonight, Mike Lockwood
  • Re: [ATM] No meeting tonight, Mike Lockwood
    • [ATM] Regular ATM Meetups (was No meeting tonight), Richard Ozer
      • Re: [ATM] Regular ATM Meetups (was No meeting tonight), Dominic-Luc Webb
    • Re: [ATM] No meeting tonight, Robert Mohr
  • Re: [ATM] No meeting tonight, Jim McPherson
  • <Possible follow-ups>
  • Re: [ATM] No meeting tonight, Francis J. O'Reilly
    • Re: [ATM] No meeting tonight, Robert Mohr
      • Re: [ATM] No meeting tonight, Francis J. O'Reilly
      • Re: [ATM] No meeting tonight, Robert Mohr
  • Re: [ATM] No meeting tonight, John Sherman
• [ATM] Nova Optical, Kowalski, Mark S
  • Re: [ATM] Nova Optical, Dominic-Luc Webb
• [ATM] Osloedu (Linux) and Schmidt polynomials, Dominic-Luc Webb
  • Re: [ATM] Osloedu (Linux) and Schmidt polynomials, Richard F.L.R. Snashall
  • [ATM] Atm'er in the Redmond Washington area, Dale Eason
• Re: [ATM] <OT> Richard would be spitting nails, Thomas A Simmons
• [ATM] Parabolising mirrors, COLJA, MICHAEL
  • Re: [ATM] Parabolising mirrors, Mel Bartels
• [ATM] PLOP_Obstruction parameter_What's wrong?, rugo@iinet.net.au
  • Re: [ATM] PLOP_Obstruction parameter_What's wrong?, Robert Houdart
  • Re: [ATM] PLOP_Obstruction parameter_What's wrong?, Mitch
  • <Possible follow-ups>
  • [ATM] PLOP_Obstruction parameter_What's wrong?, rugo@iinet.net.au
• [ATM] Preannouncement (ECDK), Richard F.L.R. Snashall
• [ATM] Protect a finished optical surface to work on reverse, Christopher Dalla Piazza
  • Re: [ATM] Protect a finished optical surface to work on reverse, Thomas Janstrom
  • Re: [ATM] Protect a finished optical surface to work on reverse, Larry Arnold
    • Re: [ATM] Protect a finished optical surface to work on reverse, Vladimir Galogaza
      • Re: [ATM] Protect a finished optical surface to work on reverse, Larry Arnold
    • Re: [ATM] Protect a finished optical surface to work on reverse, Philip Lardner
• [ATM] Schmidt correctors: 33 RPM vinyl LPs make comeback, Dominic-Luc Webb
• [ATM] Six inch starter question, Francis J. O'Reilly
  • Re: [ATM] Six inch starter question, Anthony Anconetani
  • Re: [ATM] Six inch starter question, Re: New project, Mike Lockwood
    • Re: [ATM] Six inch starter question, Re: New project, Mitch
      • Re: [ATM] Six inch starter question, Re: New project, Mike Lockwood
      • Re: [ATM] Six inch starter question, Re: New project, Francis J. O'Reilly
• [ATM] smoothing f12 5" mirror, Gil McFarlane
  • Re: [ATM] smoothing f12 5" mirror, Mitch
  • Re: [ATM] smoothing f12 5" mirror, Steve Beccue
  • Re: [ATM] smoothing f12 5" mirror, Gil McFarlane
• [ATM] Some good news about the 110 cm (43.3") Cruxis Telescope project, Robert Houdart
• [ATM] Some notes regarding the Mersenne telescope, Clyde Bone
• [ATM] Spherometer, Francis J. O'Reilly
  • Re: [ATM] Spherometer, Ken Hunter
    • Re: [ATM] Spherometer, Richard
    • Re: [ATM] Spherometer, Dominic-Luc Webb
      • Re: [ATM] Spherometer, Pat Bunn
  • <Possible follow-ups>
  • Re: [ATM] Spherometer, fundo
• Re: [ATM] Spherometer (Francis J. O'Reilly), David Janello
  • Re: [ATM] Spherometer (Francis J. O'Reilly), Michael Lindner
• [ATM] Starry Night Pro Plus & DSC non-motorized telescopes, grecner
• [ATM] Status, Francis J. O'Reilly
  • Re: [ATM] Status, Thomas A. Moulton
  • <Possible follow-ups>
  • Re: [ATM] Status, Francis J. O'Reilly
  • Re: [ATM] Status, Francis J. O'Reilly
    • Re: [ATM] Status, Thomas A. Moulton
• [ATM] suggestions wanted for 6 inch optical window, Greg Jones
• [ATM] suggestions wanted for 6 inch optical window, Gil McFarlane
  • <Possible follow-ups>
  • Re: [ATM] suggestions wanted for 6 inch optical window, Jarvis Krumbein
    • Re: [ATM] suggestions wanted for 6 inch optical window, Thomas Janstrom
• [ATM] testing tunnel, Guy Brandenburg
  • Re: [ATM] testing tunnel, Dale Eason
  • Re: [ATM] testing tunnel, Mitch
• [ATM] The .70 radius support - interesting article, IAPDK
  • Re: [ATM] The .70 radius support - interesting article, Jerry
• [ATM] The wonder of it all, Francis J. O'Reilly
  • Re: [ATM] The wonder of it all, Shane LaPierre
• [ATM] Tile tool, Gerald Clay
  • Re: [ATM] Tile tool, hermit
  • Re: [ATM] Tile tool, Mitch
    • Re: [ATM] Tile tool, Thomas A. Moulton
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data