[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Large aluminum tubes

To: atm@atmlist.net
Subject: Re: [ATM] Large aluminum tubes
From: Hugues.Laroche@ses-astra.com
Date: Wed, 14 Mar 2007 07:57:37 +0100
Delivered-to: atm_arc@astro.umsystem.edu
In-reply-to: <mailman.1.1173841201.10501.atm@atmlist.net>
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

>Does anyone know where I can get a 14.5" aluminum tube?

What about getting a large thin board (like 1-2 mm thick, 120 x 120 cm)
and roll it? You may fasten it with a row of tiny screws or maybe other
means (welding alu is possible but not so simple).

Hugues
PS: Sorry, I guess my message will be appended with a disclaimer.
Can't do anything about it.



DISCLAIMER: 
This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] Tile tool
Next by Author: [ATM] The .70 radius support - interesting article
Previous by thread: Re: [ATM] Large Aluminum Tubes
Next by thread: [ATM] Make A Barlowed Laser Collimator?
Index(es):
- Author
- Thread