Amateur Telescope Makers (ATM) Archive for MAR07 - by author

• Thread Index

• Re: [ATM] How do I test a convex surface?
  • From: "Alfredo Rainho Neves" <aneves@snowsoft.biz>
• [ATM] General questions before getting starting on a 6F6.
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• Re: [ATM] Six inch starter question
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• [ATM] Making Barlows
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• Re: [ATM] General questions before getting starting on a 6F6.
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• [ATM] Diffraction Assisted Figure Test
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Diffraction Assisted Figure Test
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] ATM Digest, Vol 39, Issue 25
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] ATM Digest, Vol 39, Issue 28
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] BEESWAX....Creation of an old lap substance....
  • From: Bernard Maugoust <maugoust@free.fr>
• [ATM] grinding questions
  • From: "Bill and Dorothy Morgan" <mountainclan12@msn.com>
• [ATM] Arizona ATM yard sale
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Bob Drew" <gofast3@hotmail.com>
• Re: [ATM] How do I test a convex surface?
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] How do I test a convex surface?
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• [ATM] Protect a finished optical surface to work on reverse
  • From: "Christopher Dalla Piazza" <dalchri@hotmail.com>
• [ATM] How do I test a convex surface?
  • From: "Christopher Dalla Piazza" <dalchri@hotmail.com>
• [ATM] Some notes regarding the Mersenne telescope
  • From: "Clyde Bone" <clydebone@zipnet.us>
• [ATM] Parabolising mirrors
  • From: "COLJA, MICHAEL" <MICHAEL.COLJA@casa.gov.au>
• Re: [ATM] Diffraction Assisted Figure Test
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] OpenFringe and mirror surface simulation program
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] help with hogging
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Atm'er in the Redmond Washington area
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] testing tunnel
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Large aluminum tubes
  • From: "Dan Lago" <dlago@roinc.com>
• Re: [ATM] Spherometer (Francis J. O'Reilly)
  • From: David Janello <djanello@yahoo.com>
• Re: [ATM] BEESWAX....Creation of an old lap substance....
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Abrasives
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Abrasives
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] Schmidt correctors: 33 RPM vinyl LPs make comeback
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Spherometer
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Nova Optical
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Fringe XP and flats
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Regular ATM Meetups (was No meeting tonight)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] FOV by design: An iterative process?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] How do I test a convex surface?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] How do I test a convex surface?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] How do I test a convex surface?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] How do I test a convex surface?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] Osloedu (Linux) and Schmidt polynomials
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Metric mirror
  • From: "Don Clement" <don_clement@charter.net>
• [ATM] Abrasives
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Status
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] German equatorial mount
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Status
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] Status
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] First time
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Next part of the project
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Spherometer
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Finished fine grinding
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Six inch starter question
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• Re: [ATM] No meeting tonight
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] No meeting tonight
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] New project
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] New project
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Six inch starter question, Re: New project
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] The wonder of it all
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Spherometer
  • From: <fundo@bellsouth.net>
• [ATM] Just starting out
  • From: Gerald Clay <gclay9999@yahoo.ca>
• [ATM] Tile tool
  • From: Gerald Clay <gclay9999@yahoo.ca>
• [ATM] smoothing f12 5" mirror
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] smoothing f12 5" mirror
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] suggestions wanted for 6 inch optical window
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Starry Night Pro Plus & DSC non-motorized telescopes
  • From: "grecner" <jan.grecner@telecom.cz>
• Re: [ATM] Large aluminum tubes
  • From: Gregg Swanson <Gregg.Swanson@microsoft.com>
• [ATM] suggestions wanted for 6 inch optical window
  • From: "Greg Jones" <gregj888@comcast.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] How do I test a convex surface?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] testing tunnel
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Help with TDE
  • From: "Hannes van Niekerk" <hannesvn@ananzi.co.za>
• Re: [ATM] Cassegrain, primary mirror perforation size
  • From: Otterstedt@t-online.de (Heiner Otterstedt)
• Re: [ATM] Cassegrain, primary mirror perforation size
  • From: Otterstedt@t-online.de (Heiner Otterstedt)
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Tile tool
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Large aluminum tubes
  • From: Hugues.Laroche@ses-astra.com
• [ATM] The .70 radius support - interesting article
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Large Aluminum Tubes
  • From: "Jack.Swaton@starryhost.com" <jack.swaton@starryhost.com>
• Re: [ATM] FOV by design: An iterative process?
  • From: James Lerch <jlerch1@tampabay.rr.com>
• [ATM] new wire spider and ring again
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] ATM Digest, Vol 39, Issue 25
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Just starting out
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] suggestions wanted for 6 inch optical window
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Making Barlows
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Herschelian MMT (neat idea?)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] The .70 radius support - interesting article
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Next part of the project
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] How do I test a convex surface?
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Making Barlows
  • From: "Jerry P. Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Diffraction Assisted Figure Test
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Foucault software
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] No meeting tonight
  • From: Jim McPherson <jim@eflightproducts.com>
• [ATM] New Tool?
  • From: "John K. LaShell" <grace.community@rcn.com>
• Re: [ATM] [offlist] New Tool?
  • From: "John K. LaShell" <grace.community@rcn.com>
• Re: [ATM] Abrasives
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: John Lynch <john_lynch2007@yahoo.com>
• [ATM] Fwd: Re: Fine Grind already Blanchard ground mirror blank back?
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] Chabot Recollection
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "John Sherman" <atmer@johnspics.com>
• Re: [ATM] No meeting tonight
  • From: John Sherman <atmer@johnspics.com>
• [ATM] Foucault software
  • From: Jonathan Lavoie <atm@lavoielactee.net>
• Re: [ATM] Spherometer
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Abrasives
  • From: "Kowalski, Mark S" <mark.kowalski@hp.com>
• [ATM] Nova Optical
  • From: "Kowalski, Mark S" <mark.kowalski@hp.com>
• Re: [ATM] Abrasives
  • From: "KR" <kreid@primus.ca>
• Re: [ATM] Protect a finished optical surface to work on reverse
  • From: Larry Arnold <larryarnold@cox.net>
• Re: [ATM] Protect a finished optical surface to work on reverse
  • From: Larry Arnold <larryarnold@cox.net>
• Re: [ATM] Mirror Tester
  • From: Mahmood Hassan <emhl95@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• [ATM] No meeting tonight
  • From: "Mark" <bethpage89@hotmail.com>
• Re: [ATM] Abrasives
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Abrasives
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Abrasives
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Just starting out
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Parabolising mirrors
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Michael Fremont" <fremontmj@gmail.com>
• Re: [ATM] Abrasives
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Abrasives
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Spherometer (Francis J. O'Reilly)
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Cassegrain, primary mirror perforation size
  • From: Michael Peck <mlpeck@hughes.net>
• [ATM] Herschelian MMT (neat idea?)
  • From: Mike Carambat <mcaramb@rocketmail.com>
• Re: [ATM] Herschelian MMT
  • From: Mike Carambat <mcaramb@rocketmail.com>
• Re: [ATM] Abrasives
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Figuring flats
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] FW: Figuring flats
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] FW: Figuring flats
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] FW: Figuring flats
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Help with TDE
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] General questions before getting starting on a 6F6.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] No meeting tonight
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] No meeting tonight
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] General questions before getting starting on a 6F6.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] New project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Six inch starter question, Re: New project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Six inch starter question, Re: New project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Abrasives
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] PLOP_Obstruction parameter_What's wrong?
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Abrasives
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] smoothing f12 5" mirror
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] FW: Figuring flats
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Tile tool
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Six inch starter question, Re: New project
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] testing tunnel
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Figuring flats
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] Just starting out
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] help with hogging
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] No meeting tonight
  • From: "Norm Prince" <norman.prince@verizon.net>
• Re: [ATM] Spherometer
  • From: "Pat Bunn" <pbunn@patbunn.com>
• Re: [ATM] How do I test a convex surface?
  • From: "Peter John Smith" <pjifl@bigpond.com>
• [ATM] Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• [ATM] FW: Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] FW: Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] FW: Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Protect a finished optical surface to work on reverse
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] FW: Figuring flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• [ATM] Fringe XP and flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Fringe XP and flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Fringe XP and flats
  • From: "Philip Lardner" <philiplardner@eircom.net>
• Re: [ATM] Finder
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Cassegrain, primary mirror perforation size
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Finder
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Abrasive grades before polishing
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Abrasives
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Next part of the project
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Spherometer
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] FOV by design: An iterative process?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] How do I test a convex surface?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Finder
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] f/15 Doublets
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] 150 mm f/8 Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Ghosts
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Ghosts
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] 35 mm Camera Lens
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Osloedu (Linux) and Schmidt polynomials
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Preannouncement (ECDK)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] ATM Digest, Vol 39, Issue 5
  • From: "RICHARD GRIMALDI, M.D." <rgrim@msn.com>
• [ATM] Regular ATM Meetups (was No meeting tonight)
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Making Barlows
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] PLOP_Obstruction parameter_What's wrong?
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• [ATM] Some good news about the 110 cm (43.3") Cruxis Telescope project
  • From: "Robert Houdart" <robert.houdart@cruxis.be>
• Re: [ATM] Making Barlows
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] No meeting tonight
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] No meeting tonight
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• Re: [ATM] No meeting tonight
  • From: "Robert Mohr" <rmohr@tiwcorp.com>
• [ATM] Make A Barlowed Laser Collimator?
  • From: "RodShea" <RodShea@comcast.net>
• [ATM] PLOP_Obstruction parameter_What's wrong?
  • From: "rugo@iinet.net.au" <rugo@iinet.net.au>
• [ATM] PLOP_Obstruction parameter_What's wrong?
  • From: "rugo@iinet.net.au" <rugo@iinet.net.au>
• [ATM] Abrasive grades before polishing
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] Make A Barlowed Laser Collimator?
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] The wonder of it all
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• [ATM] Chabot Recollection
  • From: Stan Truitt <s.truitt@hawaiiantel.net>
• Re: [ATM] Chabot Recollection
  • From: Stan Truitt <s.truitt@hawaiiantel.net>
• Re: [ATM] Fringe XP and flats
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] Fringe XP and flats
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] smoothing f12 5" mirror
  • From: Steve Beccue <lsteve@beccue.com>
• Re: [ATM] Abrasives
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Status
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Status
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Abrasives
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Tile tool
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] <OT> Richard would be spitting nails
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: [ATM] Abrasives
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Abrasives
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Protect a finished optical surface to work on reverse
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] suggestions wanted for 6 inch optical window
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Fwd: Re: Fine Grind already Blanchard ground mirror blank back?
  • From: Thomas Rutherford <rutherfordt@earthlink.net>
• Re: [ATM] Fine Grind already Blanchard ground mirror blank back?
  • From: Tom Wicker <tomofreno2000@yahoo.com>
• Re: [ATM] Protect a finished optical surface to work on reverse
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] FW: Figuring flats
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] FW: Figuring flats
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] Herschelian MMT (neat idea?)
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Herschelian MMT
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] help with hogging
  • From: <worm@valornet.com>
• [ATM] help with hogging
  • From: <worm@valornet.com>