[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Glass cutting speed

Hi Jarvis,

Friday, March 24, 2006, 9:07:08 PM, you wrote:

JK> ...put splines into the groove in the table so that when you
JK> put the glass, now with the cut side down, back on the table the splines
JK> will align the glass so the cut will come out perfectly.  

Excellent idea Jarvis, thanks.

-- 

Best regards,
  Richard in the UK

_______________________________________________
ATM mailing list http://www.atmlist.net/