[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Fusing and Slumping Project

To: atm@atmlist.net
Subject: [ATM] Fusing and Slumping Project
From: vorblesnak@peak.org
Date: Fri, 25 Mar 2005 11:05:57 -0800 (PST)
Importance: Normal
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net
User-Agent: SquirrelMail/1.4.3a

Pics at ..

http://www.atmlist.net/contrib/vorblesnak-at-peak-dot-org/Fusing/

There are some obvious questions .. heat?,  soak?,  but my big one is, 
why didn't it stick to the ceramic?  That was a clear piece of Pyrex.

David Davis
Toledo, OR  97391

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Fusing and Slumping Project
  - From: Ric Rokosz <radicell2@yahoo.com>

Prev by Author: [ATM] Fusing Glass to Ceramic mirrors
Next by Author: [ATM] Some small successes in glass and ceramic mirrors
Prev by thread: [ATM] Friction coating on polar disk
Next by thread: Re: [ATM] Fusing and Slumping Project
Index(es):
- Author
- Thread