[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] Flex Rocker Question

To: "Atm" <atm@atmlist.net>
Subject: RE: [ATM] Flex Rocker Question
From: "Peter" <peter@kitgear.com>
Date: Tue, 22 Mar 2005 05:35:39 -0500
Importance: Normal
In-Reply-To: <20050322054856.77173.qmail@web51801.mail.yahoo.com>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Hi,

Traditional 3 foot ground boards remain relatively fixed even if the ground
is uneven. I wanted to know if in your experience ring shaped ground boards
tend to rock on uneven ground when you rotate the scope?

A ring shaped ground board will lower my eyepiece height by 1.5" so I wanted
to assess if the use of such a board would be problematic when using digital
setting circles.

Thanks,


Peter

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- RE: [ATM] Flex Rocker Question
  - From: mbartels@bbastrodesigns.com

References:
- Re: [ATM] Flex Rocker Question
  - From: Dave Smith <smithersscope@yahoo.com>

Prev by Author: [ATM] Flex Rocker Question
Next by Author: RE: [ATM] Flex Rocker Question
Prev by thread: Re: [ATM] Flex Rocker Question
Next by thread: RE: [ATM] Flex Rocker Question
Index(es):
- Author
- Thread