[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Re: ATM Digest, Vol 15, Issue 9

To: <atm@atmlist.net>
Subject: Re: [ATM] Re: ATM Digest, Vol 15, Issue 9
From: "Bob May" <bobmay@nethere.com>
Date: Sat, 5 Mar 2005 21:44:31 -0800
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <002301c521f1$ddf71680$4aaafea9@imager>
Sender: atm-bounces@atmlist.net

Yep, there are standard sizes for tap and clearance drills.  You can often
get a free or near free chart from the local machinist supply house.  You
may also want to buy your taps, drills and other things from them rather
than the local Home Depot as they will usually have better quality stuff
plus having the right stuff for odds and ends.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Re: ATM Digest, Vol 15, Issue 9
  - From: "Tom and Beth" <tomandbeth@theriver.com>

Prev by Author: Re: [ATM] List "reference material"
Next by Author: Re: [ATM] another way of examining polish?
Prev by thread: [ATM] Re: ATM Digest, Vol 15, Issue 9
Next by thread: Re: [ATM] Cutting thread in aluminium
Index(es):
- Author
- Thread