[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Tile tool

To: atm@atmlist.net
Subject: Re: [ATM] Tile tool
From: Ken Lowther <hermit@outofoptions.org>
Date: Tue, 1 Mar 2005 16:24:23 -0500
In-Reply-To: <6dcba93b050301131977e02e21@mail.gmail.com>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <003201c51e9b$d269f250$3ef4ee3e@1234abc><6dcba93b050301131977e02e21@mail.gmail.com>
Sender: atm-bounces@atmlist.net
User-Agent: Internet Messaging Program (IMP) 4.1-cvs


Quoting Bryan Stiles <bryan.stiles@gmail.com>:

> Darius, I've made a couple of tile tools and had good success with
> them both. I would strongly recommend full ceramic tiles for thier
> hardness. Glazed tiles are very soft once you scratch through the
> glazing.
>
Depends on the tile that is glazed.  Not all glazed tools are soft 
under the glaze.  Ken

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Tile tool
  - From: <dhkblaszyk@zeelandnet.nl>
- Re: [ATM] Tile tool
  - From: Bryan Stiles <bryan.stiles@gmail.com>

Prev by Author: Re: [ATM] convex secondary
Next by Author: Re: [ATM] Polishing lap groove's
Prev by thread: Re: [ATM] Tile tool
Next by thread: Re: [ATM] Tile tool
Index(es):
- Author
- Thread