[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] RE: Glass Slumping



>...

>I'm thinking that the way to go is heat it to the "slumping temp" of 704C
>and soak it till its well slumped, then open the door of the oven and cool
>it a couple of hundred degrees.

>Then set the oven to 515C and let it soak at this for at least 1.5 hrs, ...

Have you considered setting the temp at 515C when the door is open?  That
way when the power comes on (ie the filaments glow) the oven is at the right
temp.

Don