Amateur Telescope Makers (ATM) Archive for MAR02 - by author

• Thread Index

• Re: ATM; Bino Basics
  • From: "A&S Hincks" <hincks@bigpond.net.au>
• Re: ATM balance point triangle
  • From: "A. Suykerbuyk" <asuyker@wxs.nl>
• Re: ATM balance point triangle
  • From: "A. Suykerbuyk" <asuyker@wxs.nl>
• Re: ATM large secondaries
  • From: "A. Suykerbuyk" <asuyker@wxs.nl>
• Re: ATM Cutting Stainless Steel
  • From: Aart Olsen <aolsen@prairienet.org>
• Re: ATM Diagonal support
  • From: Aart Olsen <aolsen@prairienet.org>
• Re: ATM Ritchey-Chretien Primary
  • From: Aart Olsen <aolsen@prairienet.org>
• ATM Sub-Diameter Tool
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• Re: ATM Sub-Diameter Tool
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• Re: ATM Sub-Diameter Tool
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• ATM Polishing Pads
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• ATM Polishing Pads
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• ATM Fast Polishing Tips Needed
  • From: Alfredo Neves <arainho_cl@yahoo.com>
• Re: ATM Aluminizing vendor options
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM More photons in my eye?
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Dia. Of equilibrium w/ Sagitta
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Hindle Article
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: Hindle and the ATM series of books
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Protecting the mirror
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Folded Newt
  • From: Andy Saulietis <iss@pvtnetworks.net>
• ATM Re: CCDs and drive errors
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM mount for a permanent mounted 16"
  • From: Andy Saulietis <iss@pvtnetworks.net>
• ATM Sixteen four-hundredths
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Sixteen four-hundredths
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Schmidt corrector: plate glass RI
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Dia. Of equilibrium w/ Sagitta
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Diameter Of Equilibrium
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Diameter Of Equilibrium
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Dia. Of equilibrium w/ Sagitta
  • From: Anthony Stillman <atmer@flash.net>
• Re: Hindle and the ATM series of books
  • From: Anthony Stillman <atmer@flash.net>
• Re: Hindle and the ATM series of books
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Dia. Of equilibrium w/ Sagitta
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Diameter Of Equilibrium
  • From: Anthony Stillman <atmer@flash.net>
• ATM Mirror stand mounting
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Falacy of precision in mirror cell design
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Cutting Stainless Steel
  • From: Anthony Stillman <atmer@flash.net>
• Wok This Way (was Re: ATM - Bevel)
  • From: Anthony Stillman <atmer@flash.net>
• Re: Wok This Way (was Re: ATM - Bevel)
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Off axis newtonian
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Off-axis paraboloid -- off-axis performance
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Cass Design
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Mirror Thicknesses
  • From: Anthony Stillman <atmer@flash.net>
• ATM OT email hickup
  • From: Anthony Stillman <atmer@flash.net>
• ATM IR camera
  • From: "Antonio de Ugarte" <de_ugarte@terra.es>
• Re: ATM What's this camera?
  • From: Aplanatic@aol.com
• Re: ATM Don't try this at home
  • From: Aplanatic@aol.com
• Re: ATM spherometer ponderings...
  • From: Aplanatic@aol.com
• Re: ATM More photons in my eye?
  • From: Aplanatic@aol.com
• Re: ATM spherometer ponderings...
  • From: Aplanatic@aol.com
• Re: ATM More photons in my eye?
  • From: Aplanatic@aol.com
• Re: ATM OSLO Spot Size help
  • From: Aplanatic@aol.com
• RE: ATM 24 inch f3.6 mirror
  • From: Aplanatic@aol.com
• Re: ATM 24 inch f3.6 mirror
  • From: Aplanatic@aol.com
• ATM Off-axis paraboloid -- off-axis performance
  • From: Aplanatic@aol.com
• ATM Friction-drive fork mount
  • From: Aplanatic@aol.com
• Re: ATM New Entry +TDE
  • From: Aplanatic@aol.com
• Re: ATM: Why Not an R-C?
  • From: Aplanatic@aol.com
• RE: ATM Fast Polishing Tips Needed
  • From: "arainho_cl" <arainho_cl@yahoo.com>
• ATM: How to get rid of an ellipse?
  • From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
• ATM: Cell induced mirror deformation.
  • From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
• RE: ATM: Cell induced mirror deformation.
  • From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
• Fw: BVC Glass for ATM Mirrors
  • From: "asm products" <asmprod@videotron.ca>
• Fw: BVC Glass for ATM Mirrors
  • From: "asm products" <asmprod@videotron.ca>
• ATM Flexing Mirror
  • From: astro <astro@cfl.rr.com>
• Re: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "AstroIdiot" <tgooch@arkwest.com>
• Re: ATM Split pins for mirror cell.
  • From: "AstroIdiot" <tgooch@arkwest.com>
• Re: ATM Cass design
  • From: "AstroJack" <AstroJack@AVATM.com>
• ATM TDE correction on a thin small blank
  • From: "AstroJack" <AstroJack@AVATM.com>
• ATM Mirror Cell Pads
  • From: "AstroJack" <AstroJack@AVATM.com>
• A new ATM'er!
  • From: "AstroJack" <AstroJack@AVATM.com>
• ATM Mirror silvering or aluminizing...
  • From: "AstroJack" <AstroJack@AVATM.com>
• RE: ATM Mirror silvering or aluminizing...
  • From: "AstroJack" <AstroJack@AVATM.com>
• ATM Update of the web page of a current project, a 32" dob
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Update of the web page of a current project, a 32" dob
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Update of the web page of a current project, a 32" dob
  • From: "at making" <atmaking@hotmail.com>
• ATM Uptdate of a web page, altaz 24" teslescope
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Uptdate of a web page, altaz 24" teslescope
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM upgrading my 12 incher
  • From: "at making" <atmaking@hotmail.com>
• ATM big bino vs very large telescope
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM big bino vs very large telescope
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM big bino vs very large telescope
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Back
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Discovery Science Channel Show
  • From: "barb" <jdubois@cin.net>
• ATM William Herschel's 20-Foot Telescope
  • From: "Bell, Andrew" <AMB2@pge.com>
• ATM Herschel's 7-foot telescope
  • From: "Bell, Andrew" <AMB2@pge.com>
• ATM Compression Arch Optical Frame
  • From: "Bill & Lois Kelley" <wekelleylwk@sedona.net>
• Re: ATM Flexing Mirror
  • From: "Bill Kelley" <flex@commspeed.net>
• ATM new address
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: ATM small thin mirrors?
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: ATM flexing a spherical mirror
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: ATM Sub-Diameter Tool
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM figuring problem
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM hydraulic grinding machine
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: ATM Question re: flattening kydex
  • From: "Bill Mitchell" <escape@velocity.net>
• ATM bino scope design
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: ATM Split pins for mirror cell.
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: ATM secondary
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: ATM Nuts! Did it again.
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: ATM mirror cleaning
  • From: "Bill Mitchell" <escape@velocity.net>
• Re: BVC Glass for ATM Mirrors
  • From: "Bill Prewitt" <bprewitt@neo.rr.com>
• ATM Mirror Thicknesses
  • From: "Bill Sander" <bsande1@hotmail.com>
• Re: ATM Compression Arch Optical Frame
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Ronchi and web material
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: exit pupil (was: ATM not really an atm question)
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM need coma corrector on 16" f/5?
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Question re: flattening kydex
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Update of the web page of a current project, a 32" dob
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM spherometer ponderings...
  • From: "Bill T." <twentiethwave@hotmail.com>
• ATM Easy Mirror Straps
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Easy Mirror Straps
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Re: Diameter Of Equilibrium
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Protecting the mirror
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Protecting the mirror
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM bandsaw question
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Mirror Thicknesses
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Mirror Cell Pads
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Very Large Mirror.
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Mirror Cell Pads
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM pitch scratches
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM pits and scratches
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Newest scope
  • From: "Bill T." <twentiethwave@hotmail.com>
• ATM New Dr. Auguste Sharpié Documents
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM out of it
  • From: "Bob" <bob@garden.net>
• Re: ATM It's been a good ride
  • From: Bob <pabob@gmx.net>
• Re: ATM Protecting the mirror
  • From: Bob <pabob@gmx.net>
• Re: ATM Cutting a Slot in the End of a Bolt
  • From: Bob Bunge <bbunge@ladyandtramp.com>
• Re: ATM Tube Material and weight
  • From: Bob Bunge <bbunge@ladyandtramp.com>
• Re: ATM Quantitative Info. on Ronchi and Interferometry
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM What's this camera?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Building a Gregorian
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Rough Grinding Question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fine grinding grit sizes
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Schmidt corrector: plate glass RI
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault Test interpetation
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault Test interpetation
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Schmidt corrector thickness difference with RI
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Am I still a newbie ?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Focuser orientation
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Mirror for scope project
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM OSLO Spot Size help
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fork mount
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cutting Stainless Steel
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM 24 inch f3.6 mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cutting Stainless Steel
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Folded Newt
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM First Foucault problems
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Re: CCDs and drive errors
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Understanding Refractors
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM mount for a permanent mounted 16"
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Off Axis Newtonian and coma
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM 24 inch f3.5 (was f/3.6) mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Chromacor, Paracorr, etc ...
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Off axis newtonian
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Off axis newtonian
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Chromacor, Paracorr, etc ...
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM attitude
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Off axis newtonian
  • From: "Bob May" <bobmay@nethere.com>
• ATM Re: How to get rid of an ellipse?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cass Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Tile setters please help
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM turning steel on a lathe
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM RS232 device question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM lens ring presure versus cell support flexure
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM knife edge
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fast Polishing Tips Needed
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cass Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: Thank You, ATM Group!
  • From: "Bob May" <bobmay@nethere.com>
• ATM Re: Bevels
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Very Large Mirror.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Off-axis paraboloid -- off-axis performance
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM lens ring presure versus cell support flexure
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Mirror Cell Pads
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Focult tester's and assorted testers for the making of Telescopes.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fast Polishing Tips Needed, Finding Polishing Pads
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Re Cass design
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch scratches
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM motorized for focuser?
  • From: "Bob May" <bobmay@nethere.com>
• ATM Re: Cell induced mirror deformation.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Zonal Masks and "parallax", accuracy of true zonal radius being tested
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM figuring problem
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Dental Stone - Tile tool: my first
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Dental Stone - Tile tool: my first
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM I need an eyepiece
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM; Bino Basics
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Dental Stone - Tile tool: my first
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM focault math
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM - Sources for diagonal mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Temporary, Raised Telescope Mounts
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM cutting glass
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM focault repeatability and wave front error
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Down the Tubes
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Ritchey-Chretien Primary
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM New Entry +TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM mirror@bham.ac.uk heating power?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Mirror Test stand
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Question re: Cleaning a polishe mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Pitch +TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Stopping down a large fast newt.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Pitch +TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Grinding Machine Design Question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Grinding Machine Design Question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Tube Material and weight
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM absence
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM How much #80 SiC per wet?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM More on Identifying Optical Glass
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM More on Identifying Optical Glass
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM absence
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Flash polish at 25 micron
  • From: "Bob May" <bobmay@nethere.com>
• ATM Truss materials
  • From: Bob Van Deusen <bobmsb@prairie.lakes.com>
• Thank You, ATM Group!
  • From: "Bob Walker" <tac@i1.net>
• ATM Free slumped mirror blank?????
  • From: "Bob Walker" <tac@i1.net>
• ATM Free slumped mirror???
  • From: "Bob Walker" <tac@i1.net>
• Re: ATM cleaning a polished mirror
  • From: "Bob Walker" <tac@i1.net>
• ATM Fw: Octagonal tube okay, I will.
  • From: "Bob Walker" <tac@i1.net>
• Re: ATM Photo color negative > positive
  • From: Brian <blast@aloha.net>
• Re: ATM Schmidt corrector: plate glass RI
  • From: Brian Boothman <brian@boothman.net>
• Re: ATM Split pins for mirror cell.
  • From: Brian Boothman <brian@boothman.net>
• Re: ATM Schmidt corrector thickness difference with RI
  • From: Brian Boothman <brian@boothman.net>
• ATM Cerox supplier near San Jose.
  • From: Brian Boothman <brian@boothman.net>
• Re: ATM New Entry +TDE
  • From: Brian Boothman <brian@boothman.net>
• Re: ATM Grinding Machine Design Question
  • From: Brian Boothman <brian@boothman.net>
• Re: ATM big bino vs very large telescope
  • From: "Bruce Sayre" <sayre@foothill.net>
• ATM Still Trying to Post, Testing again
  • From: btk@pacbell.net
• ATM Telrad Maps
  • From: btk@pacbell.net
• Re: ATM Telrad Maps
  • From: btk@pacbell.net
• Re: ATM Sub-Diameter Tool
  • From: btk@pacbell.net
• Re: ATM Sub-Diameter Tool/f2.5 6"
  • From: btk@pacbell.net
• Re: ATM large secondaries
  • From: btk@pacbell.net
• Re: ATM large secondaries
  • From: btk@pacbell.net
• Re: ATM large secondaries
  • From: btk@pacbell.net
• ATM small thin mirrors?
  • From: Carl Larson <vetenskapsman@yahoo.com>
• RE: ATM - Insulate instead of fan??
  • From: cbroward@ufl.edu
• ATM mirror cleaning
  • From: "Charles F" <quantemlp@hotmail.com>
• ATM 93 mm mirror ready
  • From: Chris Plicht <chris@plicht.de>
• Re: ATM 1st pics of 7" F/1.1 schmidt: bee's wax polishing
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: ATM motorized for focuser?
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: ATM More on Identifying Optical Glass
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: BVC Glass for ATM Mirrors
  • From: "Chris Welsh" <chris_welsh@sympatico.ca>
• Re: ATM need coma corrector on 16" f/5?
  • From: Chuck Dethloff <telmor@teleport.com>
• ATM Alternative sling mounting method
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Mirror cell design web page
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM upgrading my 12 incher
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Mirror cell design web page
  • From: Chuck Dethloff <telmor@teleport.com>
• Holding collimation, was Re: ATM Re: Astig?
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Low F/D ratio
  • From: Chuck Dethloff <telmor@teleport.com>
• RE: ATM; Bino Basics
  • From: Chuck Dethloff <telmor@teleport.com>
• ATM X-Mailer: WebeE Web Email System v1.5beta5 beta is a state of mind
  • From: Clay Kessler <ckessler@gatecom.com>
• Re: ATM hydraulic grinding machine
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM hydraulic grinding machine
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM blackening SS ?
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM re blackeining stainless steel
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM Chemical Etching Stainless Steel
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM Re: Potential Mirror heating system ?
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM Back
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Fork mount
  • From: Clive Rogers <lib@cawas.freeserve.co.uk>
• Re: ATM Fork mount
  • From: Clive Rogers <lib@cawas.freeserve.co.uk>
• Re: ATM New Entry +TDE
  • From: Colin Caissie <optic@gwi.net>
• Re: ATM Schwarzschild Secondary (Done?)
  • From: Colin Caissie <optic@gwi.net>
• ATM 10" Binoculars
  • From: "Curran, Marty" <Marty.Curran@echostar.com>
• RE: ATM big bino vs very large telescope
  • From: "Curran, Marty" <Marty.Curran@echostar.com>
• RE: ATM; Bino Basics
  • From: "Curran, Marty" <Marty.Curran@echostar.com>
• ATM hydraulic grinding machine
  • From: "D. Ray East" <dr.east@usa.net>
• ATM Focult tester's and assorted testers for the making of Telescopes.
  • From: "D. Ray East" <dr.east@usa.net>
• ATM Low F/D ratio
  • From: "D. Ray East" <dr.east@usa.net>
• Re: ATM Newest scope
  • From: "Dale Campbell" <campbeld@advion.com>
• ATM secondary
  • From: "Dan & Barb" <sunshine92@insightbb.com>
• Re: ATM re blackeining stainless steel
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM Gauss and Refractors?
  • From: Dan Cassaro <dcass@attbi.com>
• Re: ATM Cass design
  • From: Dan Cassaro <dcass@attbi.com>
• ATM Dan Cassaro
  • From: Dan Cassaro <dcass@attbi.com>
• Re: ATM Machine Grinding plan -- the devil is in the details
  • From: Dan Cassaro <dcass@attbi.com>
• ATM: Figuring a refractor
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• ATM: re: Off axis newtonian
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• Re: ATM: re: Off axis newtonian
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• ATM: Re:TDE correction on a thin small blank
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• Re: ATM big bino vs very large telescope
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• ATM: Re: Well, That Didn't Work! (Adventures In Spray Silvering)
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• RE: ATM; Bino Basics
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• RE: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• ATM Re: Relative colour abberation in refractors
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• Re: ATM Fw: Posting Assistance
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Split pins for mirror cell.
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Cass design
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: Fw: BVC Glass for ATM Mirrors
  • From: Daniel Fundo <fundo@bellsouth.net>
• ATM Foucault Test interpetation
  • From: "Dave Endres" <jerdave1@bellsouth.net>
• ATM Surface defects visible in Foucault
  • From: "Dave Endres" <jerdave1@bellsouth.net>
• ATM Mirror Correction
  • From: "Dave Endres" <jerdave1@bellsouth.net>
• BVC Glass for ATM Mirrors
  • From: "Dave Endres" <jerdave1@bellsouth.net>
• RE: BVC Glass for ATM Mirrors
  • From: "Dave Endres" <jerdave1@bellsouth.net>
• ATM More on Identifying Optical Glass
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM Protecting the mirror
  • From: Dave Sopchak <dsopchak@mac.com>
• Re: ATM Protecting the mirror
  • From: Dave Sopchak <dsopchak@mac.com>
• Re: ATM 24 inch f3.6 mirror
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Calculating coma - it's in the archive (was: Re: ATM 24 inch f3.6mirror)
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Re: ATM RS232 device question
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Re: ATM motorized for focuser?
  • From: Dave Strout <dstrout@linuxfoundary.com>
• ATM Machine Grinding plan -- the devil is in the details
  • From: Dave Strout <dstrout@linuxfoundary.com>
• RE: ATM Machine Grinding plan -- the devil is in the details
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Re: BVC Glass for ATM Mirrors
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Re: ATM mirror grinder update
  • From: David Bevel <davebevel@mindspring.com>
• ATM Some useful URL"s
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Diameter Of Equilibrium
  • From: david lewis <lewis@eecg.toronto.edu>
• Re: ATM Telrad Maps
  • From: David Palmer <dlpalmer@gte.net>
• ATM 10" f5 Dob is finished.
  • From: David Palmer <dlpalmer@gte.net>
• Re: ATM 10" f5 Dob is finished.
  • From: David Palmer <dlpalmer@gte.net>
• Re: ATM 10" f5 Dob is finished.
  • From: David Palmer <dlpalmer@gte.net>
• ATM 10" DOB finished pictures
  • From: David Palmer <dlpalmer@gte.net>
• Re: ATM 10" f5 Dob is finished.
  • From: David Palmer <dlpalmer@gte.net>
• "First light report" Re: ATM 10" f5 Dob is finished.
  • From: David Palmer <dlpalmer@gte.net>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: David Palmer <dlpalmer@gte.net>
• Re: ATM Telrad Maps
  • From: DCBly@aol.com
• ATM Cass Design
  • From: Dean Ketelsen <ketelsen@as.arizona.edu>
• Re: ATM Helpful Hint: storing abrasives
  • From: "Dennis Nikitin" <ndenis@sarkor.com>
• Re: ATM Cass Design
  • From: "Dennis Nikitin" <ndenis@sarkor.com>
• Re: ATM Low F/D ratio
  • From: "Dennis Nikitin" <ndenis@sarkor.com>
• ATM web site
  • From: "designsdavis" <designsdavis@mchsi.com>
• ATM BLANKS
  • From: "designsdavis" <designsdavis@mchsi.com>
• ATM plastic gears
  • From: "designsdavis" <designsdavis@mchsi.com>
• ATM BLANK
  • From: "designsdavis" <designsdavis@mchsi.com>
• ATM BLANK
  • From: "designsdavis" <designsdavis@mchsi.com>
• ATM inverters
  • From: "designsdavis" <designsdavis@mchsi.com>
• Re: ATM Aluminizing vendor options
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM 1st pics of 7" F/1.1 schmidt: bee's wax polishing
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Sixteen four-hundredths
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Sixteen four-hundredths
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM Schmidt corrector: plate glass RI
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM IR camera
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM Schmidt corrector thickness difference with RI
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Helpful Hint: storing abrasives
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Cass Design
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Cass Design
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Cass Design
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM cutting glass
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM cutting glass
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM cutting glass part II
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM Photo color negative > positive
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: Thanks... ATM Photo color negative > positive
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM Dia. Of equilibrium w/ Sagitta
  • From: "donovan" <donovan@bravoz.com>
• RE: ATM Diameter Of Equilibrium
  • From: "donovan" <donovan@bravoz.com>
• RE: ATM - Bevel
  • From: "donovan" <donovan@bravoz.com>
• RE: RE: ATM - Bevel
  • From: "donovan" <donovan@bravoz.com>
• RE: Wok This Way (was Re: ATM - Bevel)
  • From: "donovan" <donovan@bravoz.com>
• RE: ATM Newest scope
  • From: "donovan" <donovan@bravoz.com>
• ATM Re: Diameter Of Equilibrium
  • From: Donovan Buck <donovan@bravoz.com>
• Re: ATM mirror@bham.ac.uk heating power?
  • From: Doug Tanaka <dtanaka@seanet.com>
• Re: ATM Baffles and venting
  • From: Doug Tanaka <dtanaka@seanet.com>
• ATM Cutting Stainless Steel
  • From: "Douglas S Angle" <Douglas.S.Angle@can.dupont.com>
• ATM Protecting the mirror
  • From: "Douglas S Angle" <Douglas.S.Angle@can.dupont.com>
• Re: ATM Too many scopes, too little time :-(
  • From: DunnDave@aol.com
• ATM Ronchi Math
  • From: "Edmund Stevens" <ed@flyingscopes.com>
• Re: ATM Ronchi Math
  • From: "Edmund Stevens" <ed@flyingscopes.com>
• Re: ATM Ronchi Math
  • From: "Edmund Stevens" <ed@flyingscopes.com>
• Re: ATM turning steel on a lathe
  • From: "Edward Dean Benton" <ebenton01@sprynet.com>
• ATM Delmarva Mirror madness
  • From: "edwski" <edwski@erols.com>
• Re: ATM Telrad Maps
  • From: "Eric Claussen" <etclaussen1@yahoo.com>
• Re: ATM Telrad Maps
  • From: "Eric Claussen" <etclaussen1@yahoo.com>
• Re: ATM I need an eyepiece
  • From: "Eric Claussen" <etclaussen1@yahoo.com>
• Re: Title for M.S.(By Research) in ATM Networks
  • From: "Eric Claussen" <etclaussen1@yahoo.com>
• ATM Temporarily Leaving list
  • From: Eric Claussen <etclaussen1@yahoo.com>
• ATM How much #80 SiC per wet?
  • From: Eric Smith <eric@nutstreet.net>
• Re:ATM Sceptical about three point cell!
  • From: Fabio Pettinati <fabio@voreas.com>
• ATM Falacy of precision in mirror cell design
  • From: Fabio Pettinati <fabio@voreas.com>
• ATM Machining classes in San Jose
  • From: Fabio Pettinati <fabio@voreas.com>
• Re:ATM Photo color negative > positive
  • From: Fabio Pettinati <fabio@voreas.com>
• Re: ATM maryland precision optics
  • From: "Francis Milsom" <fmilsom@lineone.net>
• RE: ATM Zonal Masks and "parallax", accuracy of true zonal radius being t ested
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM Discovery Science Channel Show
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM plastic gears
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM - Sources for diagonal mirror
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM Convex Geometry Questions!
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM : Potential Mirror heating system ?
  • From: "Frank" <thewards@mindspring.com>
• RE: Thanks... ATM Photo color negative > positive
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM Re: Potential Mirror heating system ?
  • From: "Frank" <thewards@mindspring.com>
• RE: Thanks... ATM Photo color negative > positive
  • From: "Frank" <thewards@mindspring.com>
• ATM New Scope
  • From: "Frank" <thewards@mindspring.com>
• ATM Newest scope
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM Convex Secondary Figuring
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM New Entry +TDE
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM Planet named after Mel
  • From: "Frank" <thewards@mindspring.com>
• RE: Understanding an ATM concept
  • From: "Frank" <thewards@mindspring.com>
• RE: Understanding an ATM concept
  • From: "Frank" <thewards@mindspring.com>
• RE: Understanding an ATM concept
  • From: "Frank" <thewards@mindspring.com>
• RE: BVC Glass for ATM Mirrors
  • From: "Frank" <thewards@mindspring.com>
• RE: ATM absence
  • From: "Frank" <thewards@mindspring.com>
• Re: ATM hydraulic grinding machine
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Am I still a newbie ?
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Protecting the mirror
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM Cass design
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Off axis newtonian
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Chromacor, Paracorr, etc ...
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Chromacor, Paracorr, etc ...
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM Ronchi/Foucault tester for 24 inch f3.5 mirror
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM 10" f5 Dob is finished.
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM 10" f5 Dob is finished.
  • From: "Frank Ward" <thewards@mindspring.com>
• RE: ATM mirror@bham.ac.uk heating power?
  • From: "Frank Welsh" <f.welsh@verizon.net>
• ATM : Potential Mirror heating system ?
  • From: "Garrett Heaver" <heda@btinternet.com>
• Re: ATM Re: Potential Mirror heating system ?
  • From: "Garrett Heaver" <heda@btinternet.com>
• Re: ATM Compression Arch Optical Frame
  • From: Gary Seronik <gseronik@netway.com>
• RE: ATM More photons in my eye?
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM Diagonal support
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM: re: Off axis newtonian
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM: re: Off axis newtonian
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM hydraulic grinding machine
  • From: George Anderson <georgea@cam.org>
• Re: ATM Cleaning Stubborn CeO and Rouge Stains
  • From: George Anderson <georgea@cam.org>
• Re: ATM Very Large Mirror.
  • From: George Anderson <georgea@cam.org>
• Re: ATM Too many scopes, too little time :-(
  • From: George Anderson <georgea@cam.org>
• Re: ATM Newest scope
  • From: George Anderson <georgea@cam.org>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: George Anderson <georgea@cam.org>
• Re: BVC Glass for ATM Mirrors
  • From: "George Blahun Jr." <ks1u@prodigy.net>
• Re: BVC Glass for ATM Mirrors
  • From: "George Blahun Jr." <ks1u@prodigy.net>
• ATM - Insulate instead of fan??
  • From: Gil or Lisa McFarlane <doctorgil@peoplepc.com>
• Re: ATM Question re: flattening kydex
  • From: Glen Youman <gleny@starstream.net>
• ATM Wire Test Help
  • From: GregJ888@aol.com
• Re: ATM Wire Test Help
  • From: GregJ888@aol.com
• ATM Lateral Wire Test
  • From: GregJ888@aol.com
• ATM Is the Digest Down?
  • From: GregJ888@aol.com
• Re: ATM balance point triangle
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM balance point triangle
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM maryland precision optics
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM New Entry +TDE
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Tube Material and weight
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM Zeiss Look-Alike Rainpipe Refractor (Zelfbouw, Home made, Selbstbau).
  • From: "Hans Winkelaar" <hans.winkelaar@12move.nl>
• RE: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "Hans Winkelaar" <hans.winkelaar@12move.nl>
• RE: ATM Zeiss Look-Alike Rainpipe Refractor.
  • From: "Hans Winkelaar" <hans.winkelaar@12move.nl>
• ATM V. Eresinger Verein.
  • From: Technologie2000@t-online.de (Helmut Göbkes)
• Re: ATM Sceptical about three point cell!
  • From: Hermit <klowther@cisnet.com>
• ATM Commercial postings
  • From: Hermit <klowther@cisnet.com>
• Re: ATM out of it
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Hindle Article
  • From: Hermit <klowther@cisnet.com>
• Re: ATM 6" finished.
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Cutting Stainless Steel
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Protecting the mirror [edge polishing]
  • From: Hermit <klowther@cisnet.com>
• Re: ATM - Bevel
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Understanding Refractors
  • From: Hermit <klowther@cisnet.com>
• Re: ATM - Bevel
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Chromacor, Paracorr, etc ...
  • From: Hermit <klowther@cisnet.com>
• Re: ATM OSLO Lt Example Files
  • From: Hermit <klowther@cisnet.com>
• Re: ATM: re: Off axis newtonian
  • From: Hermit <klowther@cisnet.com>
• Re: ATM - Stupid question about Barlow lens
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Ronchi Math
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Refractors and Reflectors
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Ronchi Math
  • From: Hermit <klowther@cisnet.com>
• Re: ATM - Insulate instead of fan??
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Machining classes in San Jose
  • From: Hermit <klowther@cisnet.com>
• Re: ATM balance point triangle
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Soft Pitch
  • From: Hermit <klowther@cisnet.com>
• ATM large secondaries
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Discovery Science Channel Show
  • From: Hermit <klowther@cisnet.com>
• Re: ATM large secondaries
  • From: Hermit <klowther@cisnet.com>
• Re: ATM - Sources for diagonal mirror
  • From: Hermit <klowther@cisnet.com>
• Re: ATM focault math
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Too many scopes, too little time :-(
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Down the Tubes
  • From: Hermit <klowther@cisnet.com>
• Re: ATM mirror@bham.ac.uk heating power?
  • From: Hermit <klowther@cisnet.com>
• Re: ATM New Entry +TDE
  • From: Hermit <klowther@cisnet.com>
• Re: ATM New Entry +TDE
  • From: Hermit <klowther@cisnet.com>
• Re: ATM New Entry +TDE
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Telescope Makers please reply! was why not a R-C
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Grinding Machine Design Question
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Tube Material and weight
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Tube Material and weight
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Tube Material and weight
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Flash polish at 25 micron
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Protecting the mirror
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• Re: ATM Protecting the mirror
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• Re: ATM Fine grinding grit sizes
  • From: Hugues.Laroche@ses-astra.com
• ATM Scratch generation during polilshing
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM Grit Size
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM 5 inch mirror project problem.
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM Very Large Mirror.
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM large secondaries
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM Ritchey-Chretien Primary
  • From: Hugues.Laroche@ses-astra.com
• Re: ATM cleaning brass parts
  • From: Ian Timshel <itschaotic@yahoo.ca>
• ATM out of it
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM thread on threads
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM drill bench quick&dirty
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM drill bench
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM absence
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• Re: ATM Split pins for mirror cell.
  • From: "J&S" <jsstars@worldnet.att.net>
• Re: ATM Cutting Stainless Steel
  • From: "J&S" <jsstars@worldnet.att.net>
• Re: ATM Mirror Cell Pads
  • From: "J&S" <jsstars@worldnet.att.net>
• ATM Prominence Scope
  • From: JAMccaf4u@aol.com
• ATM Prominence Scope
  • From: JAMccaf4u@aol.com
• ATM OSLO Spot Size help
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM Spot Size, a thank you! WAS OSLO Spot Size help
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM 24 inch f3.6 mirror
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Surface defects visible in Foucault
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Surface defects visible in Foucault
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM OSLO Lt Example Files
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM Well, That Didn't Work! (Adventures In Spray Silvering)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM Re: Re: Well, That Didn't Work! (Adventures In Spray Silvering)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Mirror silvering or aluminizing...
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Silvering Chemistry
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM Schwarzschild Secondary (Done?)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Schwarzschild Secondary (Done?)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Schwarzschild Secondary (Done?)
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM re blackeining stainless steel
  • From: James P Crombie <jpcrombie@islandtelecom.com>
• ATM mirror grinder update
  • From: James P Crombie <jpcrombie@islandtelecom.com>
• ATM Re aluminium nomemclature
  • From: James P Crombie <jpcrombie@islandtelecom.com>
• ATM finished scope and moto-focus question
  • From: "James Taylor" <u2pilot@satx.rr.com>
• Re: ATM finished scope and moto-focus question
  • From: "James Taylor" <u2pilot@satx.rr.com>
• ATM motorized for focuser?
  • From: "James Taylor" <u2pilot@satx.rr.com>
• Re: ATM More photons in my eye?
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM need help with Tex ..
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Am I still a newbie ?
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Surface defects visible in Foucault
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Is it necessary to parabolize a 6" f/8?
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Focault for Windows
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: Understanding an ATM concept
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Schwarzschild Secondary (Done?)
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Schwarzschild Secondary (Done?)
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• ATM balance point triangle
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: ATM the size of sec
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• ATM upgrading my 12 incher
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: ATM Mirror Cell Pads
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• ATM Re: Astig?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: Holding collimation, was Re: ATM Re: Astig?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• ATM strange observation
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: ATM motorized for focuser?
  • From: Jay LeBlanc <jaleblan@dakotacom.net>
• Re: ATM; Bino Basics
  • From: Jay LeBlanc <jaleblan@dakotacom.net>
• Re: ATM Very Large Mirror.
  • From: "Jean-Guy Moreau" <jgmoreau@lino.com>
• exit pupil (was: ATM not really an atm question)
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: exit pupil (was: ATM not really an atm question)
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Sceptical about three point cell!
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Secondary Obstruction
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Secondary Obstruction
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Sceptical about three point cell!
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• ATM need coma corrector on 16" f/5?
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM bino scope design
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: Hindle and the ATM series of books
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM how much flex in a mirror is permisible
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM balance point triangle
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM: Cell induced mirror deformation.
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Cass Design
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Mirror stand mounting
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM mount for a permanent mounted 16" (part 2)
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM pits and scratches
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM - Sources for diagonal mirror
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Stopping down a large fast newt.
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM; Bino Basics
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Convex Geometry Questions!
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Ritchey-Chretien Primary
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Ritchey-Chretien Primary
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM; Bino Basics
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM; Bino Basics
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Ritchey-Chretien Primary
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Ritchey-Chretien Primary
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM; Bino Basics
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Octagonal Wood tube design - only 5.8 pounds!
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: Understanding an ATM concept
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: Understanding an ATM concept
  • From: "Jeff Anderson-Lee" <jandersonlee@sbcglobal.net>
• Re: ATM Wire Test Help
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Fwd: [Address Change for Batterson]
  • From: Jeremy Batterson <jdbaterson@usa.net>
• ATM Gauss and Refractors?
  • From: Jeremy Batterson <jdbaterson@usa.net>
• Re: ATM 24 inch f3.6 mirror
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Protecting the mirror
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM 10" f5 Dob is finished.
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM - Insulate instead of fan??
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM the size of sec
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Mirror Cell Pads
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM motorized for focuser?
  • From: "Jim Miller" <jim@jtmiller.com>
• ATM Holograph Lens for Finderscope?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: Understanding an ATM concept
  • From: "Jim Miller" <jim@jtmiller.com>
• ATM I need pictures of herschel's 7ft telescope
  • From: Joe campbell <joe@esper.com>
• Re: A new ATM'er!
  • From: Joe campbell <joe@esper.com>
• Re: A new ATM'er!
  • From: Joe campbell <joe@esper.com>
• Re: ATM Chromacor, Paracorr, etc ...
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Cass Design
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM zero / clearance
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Discovery Science Channel Show
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Discovery Science Channel Show
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM GLUE!
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Protecting the mirror
  • From: "John E.Pike" <jp.jep@verizon.net>
• ATM attitude
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: ATM Sorbothane supplier...
  • From: "John E.Pike" <jp.jep@verizon.net>
• ATM zero / clearance
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: ATM zero / clearance
  • From: "John E.Pike" <jp.jep@verizon.net>
• ATM zero clearance duck,now stupid things i lived through
  • From: "John E.Pike" <jp.jep@verizon.net>
• ATM lurie houghton
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: ATM Newest scope
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: ATM Planet named after Mel
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: BVC Glass for ATM Mirrors
  • From: "John E.Pike" <jp.jep@verizon.net>
• Re: ATM Delmarva Mirror madness
  • From: John Hutto <jdhutto@yahoo.com>
• Re: ATM street light fix
  • From: John Scott McLean <jsmclean@gis.net>
• ATM DC Power distribution
  • From: John Scott McLean <jsmclean@gis.net>
• Re: ATM DC Power distribution
  • From: John Scott McLean <jsmclean@gis.net>
• ATM Hindle Article
  • From: John Scott McLean <jsmclean@gis.net>
• Re: ATM More photons in my eye?
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM More photons in my eye?
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Protecting the mirror
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Chromacorr, Paracorr, etc...
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Off-axis paraboloid -- off-axis performance
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM motorized for focuser?
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM; Bino Basics
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Lens quality
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM More photons in my eye?
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM First Foucault problems
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM First Foucault problems
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM Diagonal support
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM Foucault lenses?
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM lurie houghton
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM Down the Tubes
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM Convex Geometry Questions!
  • From: John Swenson <johnswenson1@attbi.com>
• Re: ATM Ritchey-Chretien Primary
  • From: John Swenson <johnswenson1@attbi.com>
• ATM Houghton corrector on machine
  • From: John Swenson <johnswenson1@attbi.com>
• ATM Sliding Roof Observatory Manufacturer?
  • From: Jon Wilson <jwilson7@ix.netcom.com>
• ATM flexing a spherical mirror
  • From: "Jons, Kelly" <jons_k@Shaker-Heights.k12.oh.us>
• Re: ATM hydraulic grinding machine
  • From: Joseph Goins <jb_goins@yahoo.com>
• ATM Whoops.
  • From: Joseph Goins <jb_goins@yahoo.com>
• ATM Rough Grinding Question
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Protecting the mirror
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM - Bevel
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: Wok This Way (was Re: ATM - Bevel)
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM - Bevel
  • From: Joseph Goins <jb_goins@yahoo.com>
• RE: ATM 10" f5 Dob is finished.
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Nuts! Did it again.
  • From: Joseph Goins <jb_goins@yahoo.com>
• ATM 5 inch mirror project problem.
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Mirror cell design web page
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Very Large Mirror.
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM pits and scratches
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM glass ignorance.!!
  • From: Joseph Goins <jb_goins@yahoo.com>
• ATM HTML Formatted Messages.
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Question re: flattening kydex
  • From: Joseph Johnston <usc@sover.net>
• ATM lens ring presure versus cell support flexure
  • From: Joseph Johnston <usc@sover.net>
• ATM URL's and overreactions
  • From: jsgrmfg@gracemfg.com
• ATM Temporary, Raised Telescope Mounts
  • From: Juan Ochoa <jochoa@ll.mit.edu>
• ATM 6" finished.
  • From: k_patel@vsnl.com
• Re: ATM secondary
  • From: k_patel@vsnl.com
• Re: ATM Truss materials
  • From: k_patel@vsnl.com
• Re: ATM Soft Pitch
  • From: "Kam Marine" <nutsp@alltel.net>
• RE: exit pupil (was: ATM not really an atm question)
  • From: "Ken Bertapelle" <kenb@cqg.com>
• ATM Question re: flattening kydex
  • From: "Ken Bertapelle" <kenb@cqg.com>
• RE: ATM Question re: flattening kydex
  • From: "Ken Bertapelle" <kenb@cqg.com>
• RE: ATM Split pins for mirror cell.
  • From: "Ken Bertapelle" <kenb@cqg.com>
• RE: ATM balance point triangle
  • From: "Ken Bertapelle" <kenb@cqg.com>
• RE: ATM knife edge
  • From: "Ken Bertapelle" <kenb@cqg.com>
• RE: ATM Mirror Cell Pads
  • From: "Ken Bertapelle" <kenb@cqg.com>
• ATM Question re: Cleaning a polishe mirror
  • From: "Ken Bertapelle" <kenb@cqg.com>
• Re: ATM hydraulic grinding machine
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Sixteen four-hundredths
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Don't try this at home
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Surface defects visible in Foucault
  • From: "Ken Hunter" <kb7h@onemain.com>
• ATM Beveling the edge
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM - Stupid question about Barlow lens
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Off axis newtonian
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: Thank You, ATM Group!
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Re Cass design
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM aluminum nomenclature
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Mirror Cell Pads
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM - Stupid question about Barlow lens
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM glass ignorance.!!
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM pits and scratches
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Central Depression
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM focault math
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM focault math
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM glass ignorance.!!
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM focault repeatability and wave front error
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Down the Tubes
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Ritchey-Chretien Primary
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Question re: flattening kydex
  • From: "ken mattern" <longeye@surfari.net>
• Re: ATM Cutting Stainless Steel
  • From: "ken mattern" <longeye@surfari.net>
• Re: ATM bandsaw question
  • From: "ken mattern" <longeye@surfari.net>
• Re: ATM attitude
  • From: "ken mattern" <longeye@surfari.net>
• Re: ATM hydraulic grinding machine
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Zeiss Look-Alike Rainpipe Refractor (Zelfbouw, Home made, Selbstbau).
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM RE: Surplus Shed, Large Flat Mirrors $5 each
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM spherometer ponderings...
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM spherometer ponderings...
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Split pins for mirror cell.
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: Wok This Way (was Re: ATM - Bevel)
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Fast Polishing Tips Needed
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM motorized for focuser?
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• ATM Teflon pads
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM zero clearance duck,now stupid things i lived through
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Free slumped mirror blank?????
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Re: Potential Mirror heating system ?
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• RE: ATM Convex Geometry Questions!
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Re: Potential Mirror heating system ?
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM Ritchey-Chretien Primary
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM New Entry +TDE
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• Re: ATM: Why Not an R-C?
  • From: "Kenneth Hunter" <kb7h@onemain.com>
• ATM Am I still a newbie ?
  • From: Kim Ejlertsen <atm@calyx.mfi.ku.dk>
• Re: ATM pitch to soft
  • From: kim.eilertsen@dk.abb.com
• ATM Re: Figuring a refractor
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: ATM More on Identifying Optical Glass
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: Re: ATM Tri-Space and Chromacor
  • From: klowther@cisnet.com
• Re: ATM Polishing Pads
  • From: klowther@cisnet.com
• Re: RE: ATM - Insulate instead of fan??
  • From: klowther@cisnet.com
• Re: RE: ATM - Insulate instead of fan??
  • From: klowther@cisnet.com
• Re: Re: ATM Soft Pitch
  • From: klowther@cisnet.com
• Re: Re: ATM New Entry +TDE
  • From: klowther@cisnet.com
• Re: ATM spherometer ponderings...
  • From: "Kreig McBride" <kmcbride@memes.com>
• ATM Telescope Optics Workshop
  • From: "Kreig McBride" <kmcbride@memes.com>
• ATM beveling glass
  • From: "Kreig McBride" <kmcbride@memes.com>
• ATM cutting glass
  • From: "Kreig McBride" <kmcbride@memes.com>
• ATM cutting glass part II
  • From: "Kreig McBride" <kmcbride@memes.com>
• Re: ATM focault math
  • From: kumar kudiyarasu <iitkumar@yahoo.com>
• Title for Research in ATM Networks
  • From: kumar kudiyarasu <iitkumar@yahoo.com>
• Title for M.S.(By Research) in ATM Networks
  • From: kumar kudiyarasu <iitkumar@yahoo.com>
• ATM Fine grinding grit sizes
  • From: "l keller" <lkeller1970@hotmail.com>
• ATM; Plate Glass Specs.
  • From: "Larry Davis" <Davis@digdat.com>
• FW: ATM pitch to soft
  • From: "Larry Davis" <Davis@digdat.com>
• ATM; link to pitch properties
  • From: "Larry Davis" <Davis@digdat.com>
• ATM; Pitch properties
  • From: "Larry Davis" <Davis@digdat.com>
• ATM; Bino Basics
  • From: "Larry Davis" <Davis@digdat.com>
• Re: ATM How much #80 SiC per wet?
  • From: Lawrence Sayre <lsayre@apk.net>
• Re: ATM Question re: flattening kydex
  • From: Leftfieldstar@aol.com
• Re: ATM blackening SS ?
  • From: Leftfieldstar@aol.com
• Re: ATM balance point triangle
  • From: Leftfieldstar@aol.com
• Re: ATM balance point triangle
  • From: Leftfieldstar@aol.com
• Re: ATM balance point triangle
  • From: Leftfieldstar@aol.com
• Re: ATM web site
  • From: Leftfieldstar@aol.com
  </