[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM ghost posts


Ron writes,

>And for a smoother
>thread, tap a hardwood block and use it along with valve-grinding compound 
>to smooth up your threads.

I use a rubber abrasive stick to smooth fine
threads. These sticks are available at machine tool
supply places. Use a little WD-40 on the end of
the stick, which is pressed into the thread as it rotates..
watch your fingers..:)




Andy Saulietis
ISS Enterprises
39 Silver Fox Trail
Mayhill NM 88339
505-687-3067 voice
505-687-3021 fax, call voice or e-mail to set up
e-mail: iss@pvtnetworks.net