Amateur Telescope Makers (ATM) Archive for JUN99 - by author
- RE: ATM truss strength: Shower rod
- From: (519) QT Optec AG Jansson Mattias <claude.serquet@qtgroup.com>
- RE: ATM threaded inserts
- From: (519) QT Optec AG Jansson Mattias <claude.serquet@qtgroup.com>
- ATM Battery charging
- From: Adam Perkins <scopeguru@yahoo.com>
- RE: ATM Speaking of Dob Bearings
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM Concrete Piers
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM How to make a heat coil fix your figure...
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM: Interpreting Foucault Shadowgrams
- From: Adam Rosenberg <adamr@synopsys.com>
- ATM Re: [CCD] Alt/Az Autoguiding
- From: Al Kelly <akelly@ghg.net>
- Re: ATM Learning from te pros
- From: "Alexander Urban" <urban@mpe.mpg.de>
- ATM CCD spec needed (sort of OT) & rTMc
- From: Anthony Stillman <atmer@flash.net>
- ATM f/ what?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM f/ what ...my name is
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Sur[lus optics
- From: Anthony Stillman <atmer@flash.net>
- Generator (was ATM Blank statistics?)
- From: Anthony Stillman <atmer@flash.net>
- ATM Generator
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Generator
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Book recommendations?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Porthole Parameters for PLOP
- Re: ATM Cass Question
- Re: ATM f/ what ...my name is Rumak!
- ATM A pair of Rumaks
- Re: ATM Artificial Star for Testing (Long)
- Re: ATM MakNewt Corrector Figures
- ATM 6inch F4
- From: "Art Russell" <artrussell@mindspring.com>
- ATM Sky Commander and Megastar
- From: "Art Russell" <artrussell@mindspring.com>
- ATM Megastar and Sky Commander
- From: "Art Russell" <artrussell@mindspring.com>
- ATM FW: Clock drive and motors
- From: "Art Russell" <artrussell@mindspring.com>
- Re: ATM Asaf's visit
- From: "Asaf S.-T." <astropal@yahoo.com>
- Re: ATM a visit from Asaf
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM Learning from te pros
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM The cost of Dave's telescope
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM Anyone heard from ASTRO
- From: "Asaf S.-T." <astropal@yahoo.com>
- ATM From where to begin?
- From: Asaf Shtull-Trauring <astropal@yahoo.com>
- ATM Reducing chances of scratches
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Aperture, focal length and airy's disk
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM burgundy pitch
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Secondary mirrors
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM : Unchannelled polishing laps
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM : what is Coma
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM : What is coma
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM : Just a few questions before I screw my Dob together for the first time
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- Re: ATM -- Protostar Diagonals
- Re: ATM Aluminum instead of ebony star for side bearings
- Re: ATM Speaking of Dob Bearings
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Looking for this
- ATM Asaf's visit
- From: "astrola" <astrola@dmrtc.net>
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- ATM Re: Houghton Comments`
- ATM Re: atm-digest V1 #1680
- RE: ATM Barlow quality & odd list behavior
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Unchanneled Lap Polishing
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM Pyrex glass questions
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Pyrex glass questions
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Dob vs Equatorial bearing sizes
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Barlow quality & odd list behavior
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Tool tile shapes
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Speaking of Dob Bearings
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM What is under/over correction - really?
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- ATM Dahl Null Test Question
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM What is under/over correction - really?
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Parabolising - different methods - merits
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM TM reprints
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM How to make a heat coil to reduce dew?
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- Re: ATM metric dial gage and TEX program
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM A book
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM book: ...Experimental Physics
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM threaded inserts
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM Screwed up dentstone tool???
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM Alt/Az Autoguiding
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM Newport mirror kits
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM Barlow quality & odd list behavior
- From: behambu@teleline.es (Berthold Hamburger)
- Re: ATM questions
- From: behambu@teleline.es (Berthold Hamburger)
- Re: Different sort of ATM project
- From: "Bill Akins" <bakins@newsguy.com>
- Re: ATM Pouring concrete - the basics
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM Starfish shaped lap for parabolising
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM Zones and wave error
- From: Bill Marriott <btk@pacbell.net>
- ATM making a multi-capable tester
- From: "Bill Morgan" <sass5@erols.com>
- ATM making a multi-capable tester
- From: "Bill Morgan" <sass5@erols.com>
- Re: ATM making a multi-capable tester
- From: "Bill Morgan" <sass5@erols.com>
- ATM Tall 2" focusers question
- From: "Bob King" <lakewind@duluth.infi.net>
- ATM Best eyepieces at f/4
- From: "Bob King" <lakewind@duluth.infi.net>
- 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during polishing??)
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM truss strength: Shower rod
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during po lishing??)
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Ellipsoid or hyperboloid? or maybe paraboloid?
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM threaded inserts
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Aluminum instead of ebony star for side bearings
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM stolen scopes & security
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Unchanneled Lap Polishing
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Longitudinal Aberration Measurement
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Asaf's visit
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Silvering check list: please help
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Silvering check list: please help
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM What's Best Material to Create a Tool?
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM What's Best Material to Create a Tool?
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Grinding Grit
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Question on grinding surface stability
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Source for rubber rollers?
- From: Bob Rubendunst <softm@soltec.net>
- Re: Different sort of ATM project
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM Stolen Telescopes - more information.
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM stolen scopes & security
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM Looking for this
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM Project ]I[
- From: Bob Smallwood <smallwood@technologist.com>
- ATM Nylon sleeves for truss tubes
- Re: ATM How thick can RTV pads be?
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: "bprewitt" <bprewitt@neo.rr.com>
- Re: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during polishing??)
- From: Brad Davy <bdavy@fred.net>
- Re: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during po lishing??)
- From: Brad Davy <bdavy@fred.net>
- ATM Advice on Secondary Sizing
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Ellipsoid or hyperboloid? or maybe paraboloid?
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Advice on Secondary Sizing
- From: Brad Davy <bdavy@fred.net>
- ATM Should I continue to tweak?
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Should I continue to tweak?
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Helical focuser question
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Motorized declination drive
- From: Brad Davy <bdavy@fred.net>
- Re: ATM New dentstone (tile) tool
- From: Brad Davy <bdavy@fred.net>
- Re: ATM plaster tool tiles wearing down
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Mirror Testing
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM threaded inserts
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM What is under/over correction - really?
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM Need more silicone advice (long)
- From: Bradley Davy <bdavy@fred.net>
- ATM Source of Tube Connectors (Threaded Inserts)
- From: Brandon Mathew <bhm@jps.net>
- Re: ATM Trusses (was ATM truss strength: Shower rod)
- From: "Brent Russell" <brussel@global.co.za>
- ATM Star test questions...
- From: "Brent Russell" <brussel@global.co.za>
- ATM Eyepiece Help
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Star test questions...
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Seek Advice on 1st Mirror
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Motors and encoders
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Spin Casting Mirrors -- in Space!
- From: Brian Nestel <blast@aloha.net>
- Re: ATM CCD spec needed (sort of OT) & rTMc
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Re: atm-digest V1 #1663
- From: Brian Nestel <blast@aloha.net>
- Re: ATM stolen scopes & security
- From: Brian Nestel <blast@aloha.net>
- Re: ATM stolen scopes & security
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Barlow quality & odd list behavior
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Postal service Billing Us for E-mail.
- From: Brian Nestel <blast@aloha.net>
- ATM bad news at stellafane
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Salvaging an optical window.
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Glass Bricks?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Glass Bricks?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM msg from list owner on Stellafane discussion
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Should I continue to tweak?
- ATM Re: Comet Catcher Help
- Re: ATM Chabot still at old location?
- ATM MakNewt Corrector Figures
- ATM prism diagonal
- re: ATM Crayford focuser
- From: Callum Potter <CallumP@selectst.com>
- ATM truss strength: Shower rod
- From: CFRandom <cfrandom@qx.net>
- RE: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: Different sort of ATM project
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Interpreting Ingalls
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM RKE eyepieces
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: Re[3]: ATM Optics Question from a Newbie
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM APO?
- ATM I was wondering about a book
- From: Christopher Krubel <ckrubel@bellsouth.net>
- Re: ATM IEEE1394 (firewire) and pulse counting
- From: Christopher Krubel <ckrubel@bellsouth.net>
- ATM What would be a good book to learn about grinding mirrors?
- From: "Christopher R. Palmer" <crpalmer@brain.uccs.edu>
- ATM Surface area- slightly off-topic
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: Different sor of ATM project
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Surface area
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Surface Area
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM stolen scopes & security
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Security-going to extremes
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Alternatives to Newtonians
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Correcting Astigmatism with a Barlow
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Correcting Astigmatism with a Barlow
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Re: Horace Dall
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM 16-inch scope
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Ingalls Book
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Ingalls Book
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM APO
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Houghton
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM RKE eyepieces
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM RKE Eyepieces
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM RKE eyepieces
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM OFF TOPIC: Worms
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Motorized declination drive
- From: "Chuck Shaw" <cshaw@ghg.net>
- ATM Alt/Az Autoguiding
- From: "Chuck Shaw" <cshaw@ghg.net>
- ATM Fw: Alt/Az Autoguiding
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Graphite composite truss tubes
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Trusses (was ATM truss strength: Shower rod)
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Questions on baffling/painting first scope.
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM truss strength: Shower rod
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Tall 2" focusers question
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Aperture gains
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Advice on Secondary Sizing
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Aperture, focal length and airy's disk
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Re:truss tubes-designs
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM scope design/was truss tube
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Wide-Angle Lenses
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Mirror Coating
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Anodising
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Alternatives to Newtonians
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM scope design/was truss tube
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Of burglars and other mental giants.
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Behold, the "Torch of Doom"
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Behold, the "Torch of Doom"
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Barlow...
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Aluminum instead of ebony star for side bearings
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM New Pics....
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM APO?
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM 20 inch Binoculars take form
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM 20" mirror geometry.....
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Stolen Telescopes - more information.
- Re: ATM Airline travel scope confusion=backpacking scope??
- New to ATM
- From: "Craig Lyman" <craiglyman@cmidirect.net>
- Re: New to ATM
- From: "Craig Lyman" <craiglyman@cmidirect.net>
- Re: ATM Special equatorial
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: SV: Different sort of ATM project
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM questions
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Barlow quality & odd list behavior
- From: "Dan Brown" <danb35@earthlink.net>
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Ungluing Diagonal
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Help with figuring please
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Barlow quality & odd list behavior
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Longitudinal Aberration Measurement
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM A few questions before I screw my Dob together for the first time..
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM A few questions before I screw my Dob together for the first time..
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Houghton at the Grand Canyon (aka Telescope Windows)
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM RE: Chromium or Nickel
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Artificial Star for Testing (Long)
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Are RKE eypieces OK?
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Aluminum adhesive
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM truss strength: Shower rod
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Battery charging
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Helical focuser question
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM stolen scopes & security
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: Subject: Re: ATM Stolen Telescopes - ideas
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM RKE eyepieces
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Aluminum instead of ebony star for side bearings
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Motors and encoders
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Motors and encoders
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Baffle
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Aluminum instead of ebony star for side bearings
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM cheapest- was - Best eyepieces at f/4
- From: Dave Sopchak <das@po.cwru.edu>
- ATM first light, fifth scope
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM New dentstone (tile) tool
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Houghton at the Grand Canyon (aka Telescope Windows)
- From: Dave Sopchak <das@po.cwru.edu>
- ATM a visit from Asaf
- From: Dave Sopchak <das@po.cwru.edu>
- ATM powder coating.
- From: davebevel@mindspring.com
- ATM Basic program to calculate focal length
- From: davebevel@mindspring.com
- ATM metric dial gage and TEX program
- From: davebevel@mindspring.com
- Re: ATM metric dial gage and TEX program
- From: davebevel@mindspring.com
- Re: Different sort of ATM project
- From: davebevel@mindspring.com
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: davebevel@mindspring.com
- Re: ATM Re: Dawes Limit
- From: davebevel@mindspring.com
- Re: ATM metric dial gage and TEX program
- From: davebevel@mindspring.com
- Re: ATM Should I continue to tweak?
- From: davebevel@mindspring.com
- Re: ATM Fiber Optic Cable/Dial Indicators
- From: davebevel@mindspring.com
- Re: ATM 6inch F4
- From: davebevel@mindspring.com
- Re: ATM Stolen Telescopes - more information.
- From: davebevel@mindspring.com
- Re: ATM Anodising
- From: davebevel@mindspring.com
- Re: ATM threaded inserts
- From: davebevel@mindspring.com
- Re: ATM threaded inserts
- From: davebevel@mindspring.com
- Re: ATM threaded inserts
- From: davebevel@mindspring.com
- Re: New to ATM
- From: davebevel@mindspring.com
- ATM very large mirror laps
- From: davebevel@mindspring.com
- Re: ATM Unchanneled Lap Polishing.
- From: davebevel@mindspring.com
- Re: ATM Burgundy Pitch
- From: davebevel@mindspring.com
- Re: ATM Burgundy Pitch
- From: davebevel@mindspring.com
- Re: ATM plaster tool tiles wearing down
- From: davebevel@mindspring.com
- Re: ATM Barlow quality & odd list behavior
- From: davebevel@mindspring.com
- ATM Crayford focuser
- From: davebevel@mindspring.com
- Re: ATM Crayford focuser
- From: davebevel@mindspring.com
- Re: ATM Tool tile shapes
- From: davebevel@mindspring.com
- ATM Re: Ball Eyepiece, Ball lens source
- From: davebevel@mindspring.com
- ATM Web page update
- From: davebevel@mindspring.com
- Re: ATM questions
- From: davebevel@mindspring.com
- Re: ATM Bartels type hand paddle pin out
- From: davebevel@mindspring.com
- Re: ATM Copier Scope
- From: davebevel@mindspring.com
- Re: ATM Source for rubber rollers?
- From: davebevel@mindspring.com
- Additions to ATM web site
- From: davebevel@mindspring.com
- Re: ATM Foucault Tester and RTV advice
- From: davebevel@mindspring.com
- Re: ATM RKE eyepieces
- From: davebevel@mindspring.com
- Re: ATM TM reprints
- From: davebevel@mindspring.com
- Re: ATM Grinding Grit
- From: davebevel@mindspring.com
- ATM Digital setting circles project on my web site
- From: "David Ek" <ekdave@earthlink.net>
- Re: ATM Porthole Parameters for PLOP
- From: david lewis <lewis@eecg.toronto.edu>
- Re: ATM corning glass
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Motors and encoders
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Should I continue to tweak?
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Should I continue to tweak?
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Battery charging
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM possible new glass source - ad alert
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Radioactive telescope
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM New dentstone (tile) tool
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Burgundy Pitch
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM New dentstone (tile) tool
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Dob vs Equatorial bearing sizes
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Dahl Null Test Question
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Starfish shaped lap for parabolising
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Grinding Grit
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Appropriate barlow ?s
- From: David Simons <hmsimons@hotmail.com>
- ATM Classic Electron Microscope 4Sale on eBay
- From: David Sleeter <sleete19@idt.net>
- ATM Clarification: Classic Electron Microscope 4Sale on eBay
- From: David Sleeter <sleete19@idt.net>
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: deepsky <deepsky@usmo.com>
- Re: ATM Gears
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM sub-diameter grinding
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Grinding Machine Help?
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Grinding Grit
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Grinding Machine Help?
- From: Dennis Rech <dennisrech@home.com>
- ATM IEEE1394 (firewire) and pulse counting
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Chabot still at old location?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Grinding Table top
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Correct link to Eastbay Astro Society
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM RTMC
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Barlow quality & odd list behavior
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Dob vs Equatorial bearing sizes
- From: Donald Clement <clement@inetworld.net>
- Re: ATM How to make a heat coil to reduce dew?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM SCT mirror flop - how about shims?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM C14 referb. help , secondary R??
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM : what is Coma
- From: Donovan Buck <donovan@adhouston.com>
- Re: Different sort of ATM project
- From: Donovan Buck <donovan@adhouston.com>
- Re: ATM KS-87A Aerial Camera Lens As Objective?
- From: Doug Angle <Douglas.S.Angle@can.dupont.com>
- re: ATM Dall Null Test
- From: "Doug Arion" <ariond1@carthage.edu>
- Re: ATM electron microscope
- From: Douglas Gourlay <dlg@worldchat.com>
- ATM questions
- From: Dragan Miladinovic <dragmila@eunet.yu>
- ATM aluminizing
- From: Dragan Miladinovic <dragmila@eunet.yu>
- Re: ATM Motors and encoders
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM metric dial gage and TEX program
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Surface area- slightly off-topic
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Surface area
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Battery charging
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Ungluing Diagonal
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM: Interpreting Foucault Shadowgrams
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Shearing Interferometer - interpretation
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM: Interpreting Foucault Shadowgrams
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM How thick can RTV pads be?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM New dentstone (tile) tool
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Motorized declination drive
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Unchanneled Lap Polishing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Motorized declination drive
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Unchanneled Lap Polishing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow quality & odd list behavior
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Unchanneled Lap Polishing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Appropriate barlow ?s
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Appropriate barlow ?s
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Correcting Astigmatism with a Barlow
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow quality & odd list behavior
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Correcting Astigmatism with a Barlow
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Speaking of Dob Bearings
- From: Dwight Elvey <elvey@hal.com>
- ATM Some Barlow calculations for newbees, Rather longish.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow...
- From: Dwight Elvey <elvey@hal.com>
- Re: SV: ATM Barlow...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM What is under/over correction - really?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Appropriate barlow ?s
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Foucault Tester and RTV advice
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM HST Needs Collimation?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Foucault Tester and RTV advice
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Grinding Grit
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal length of Barlow
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Focal length of Barlow
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Optics Question from a Newbie
- From: Dwight Elvey <elvey@hal.com>
- Re[4]: ATM Optics Question from a Newbie
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Construction of Telrad
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM SCT mirror flop - how about shims?
- From: Dwight Elvey <elvey@hal.com>
- Re[3]: ATM Optics Question from a Newbie
- From: Dwight Elvey <elvey@hal.com>
- Re[5]: ATM Optics Question from a Newbie
- From: Dwight Elvey <elvey@hal.com>
- Re[5]: ATM Optics Question from a Newbie
- From: Dwight Elvey <elvey@hal.com>
- ATM Re: Graphite composite truss tubes
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Wanted: secondary holder designs
- From: Ed Falk <Ed.Falk@eng.sun.com>
- RE: ATM threaded inserts
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Plate Glass
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM mirror covers
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM Chabot still at old location?
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM Miatascope second light! Woo hoo!
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Dall Null Test
- From: "Edmund Stevens" <ehs@teleport.com>
- ATM glass window
- From: Eric Allen <ericallen@worldnet.att.net>
- Re: ATM Aperture, focal length and airy's disk
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM KS-87A Aerial Camera Lens As Objective?
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Re: Dawes Limit
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: Different sort of ATM project
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Cass Question
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Shearing Interferometer - interpretation
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM The Best Optical Testing Method?
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Dall Null Test
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Sur[lus optics
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- ATM Radioactive telescope
- From: Frank Di Marzio <frank@trinity-ec.vic.edu.au>
- ATM Protostar on vacation?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM -- Protostar Diagonals
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- RE: ATM -- Protostar Diagonals
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Book
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Screwed up dentstone tool???
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM New dentstone (tile) tool
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM New dentstone (tile) tool
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM New dentstone (tile) tool; OT
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Longitudinal Aberration Measurement
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Blank statistics?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Reducing chances of scratches
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Ellipsoid or hyperboloid? or maybe paraboloid?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Different sort of ATM project
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Gears
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: atm-digest V1 #1663
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Out of topic
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM stolen scopes & security
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Alternatives to Newtonians
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Unchanneled Lap Polishing.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM RE: Common Sence Endangered!
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Houghton at the Grand Canyon (aka Telescope Windows)
- From: "Frank Ward" <thewards@mindspring.com>
- RE: Different sort of ATM project
- From: "Freiberg, Joseph (CAP, TIP)" <Joseph.Freiberg@gecapital.com>
- ATM Help on a 4.25" scope.
- From: "G.J.Martin" <G.J.Martin@durham.ac.uk>
- Re: ATM Stellafane Endangered!
- From: "Gary J Cislak" <gslak@javanet.com>
- Re: ATM Speaking of Dob Bearings
- From: Gary Seronik <gseronik@netway.com>
- ATMing in the August Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: [Fwd: ATM Postal service Billing Us for E-mail.]
- From: gwoods@albany.net (Gary Woods)
- Re: ATM Parkerizing - simple - relatively safe.
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: SV: Different sort of ATM project
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Stolen Telescopes - more information.
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: Different sort of ATM project
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Best eyepieces at f/4
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM RKE eyepieces
- From: "Gerd F. Herzogenrath" <gfh@fh-furtwangen.de>
- ATM gluing polyurethane finished plywood
- From: gf <gforney@erols.com>
- ATM Postal service Billing Us for E-mail.
- From: ggarcia2@bellsouth.net
- Re: ATM Grinding Machine Help?
- From: gstacy@premierweb.net (GilbertStacy)
- ATM BVC Replacement
- From: Glen Bankston <microsys@alltel.net>
- ATM kriege book scopes
- From: Glen Bankston <microsys@alltel.net>
- ATM Pyrex substitute
- From: Glen Bankston <microsys@alltel.net>
- ATM grinding machine
- From: Glen Bankston <microsys@alltel.net>
- ATM grinding table
- From: Glen Bankston <microsys@alltel.net>
- Re: pipe insul. was (ATM Trusses)
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM Appropriate barlow ?s
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM Re: atm-digest V1 #1687
- From: Greg Granville <greg@argus.arl.psu.edu>
- re: ATM HST Needs Collimation?
- From: Greg Granville <greg@argus.arl.psu.edu>
- ATM- Geometric test update
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- Re: ATM f/ what
- Re: ATM f/ what
- Re: ATM f/ what
- ATM Wide-Angle Lenses
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- ATM Dawes Limit
- ATM Re: Dawes Limit
- Fw: Re: Different sort of ATM project
- Fw: Re: Different sort of ATM project
- ATM Cass Question
- Re: ATM Star test questions...
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Re: Interpreting Foucault Shadowgrams
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Finished polishing, what next?
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Beginning figuring
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Couder mask program
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Help with figuring please
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Starfish shaped lap for parabolising
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Parabolising - different methods - merits
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Are RKE eypieces OK?
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- RE: ATM threaded inserts
- From: Hugues_Laroche@ses-astra.com
- Re: ATM threaded inserts
- From: Hugues_Laroche@ses-astra.com
- Re: New to ATM
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Plate Glass
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Alternatives to Newtonians
- From: Hugues_Laroche@ses-astra.com
- RE: ATM Unchanneled Lap Polishing.
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Zerodur blank FS:
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Longitudinal Aberration Measurement
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Blank statistics?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM A pair of Rumaks
- From: "Igor G. Rozivika" <aso@sbor.ru>
- ATM Re: KS-87A Aerial Camera Lens As Objective?
- From: iss@pvtnetworks.net
- Re: ATM Stolen Telescopes - more information.
- From: iss@pvtnetworks.net
- Re: ATM Surface area
- From: iss@pvtnetworks.net
- Re: Different sort of ATM project
- From: iss@pvtnetworks.net
- Re: ATM threaded inserts
- From: iss@pvtnetworks.net
- Re: ATM Portable Mount for Camera?
- From: iss@pvtnetworks.net
- Re: ATM Stolen Telescopes - Humor
- From: iss@pvtnetworks.net
- Re: ATM Security-going to extremes
- From: iss@pvtnetworks.net
- Re: ATM Alternatives to Newtonians
- From: iss@pvtnetworks.net
- Re: ATM Parabolic correction devices
- From: iss@pvtnetworks.net
- Re: ATM Barlow...
- From: iss@pvtnetworks.net
- Re: ATM Dob vs Equatorial bearing sizes
- From: iss@pvtnetworks.net
- Re: Re[2]: ATM Optics Question from a Newbie
- From: iss@pvtnetworks.net
- ATM Fiber Optic Cable/Dial Indicators
- From: "J. LaFountain" <lafountainj@sprintmail.com>
- Re: ATM overcoating services
- From: "James E. Gort" <gort@sonetis.com>
- RE: ATM truss strength: Shower rod
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re: truss tubes
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: ATM Re: truss tubes
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re:truss tubes-designs
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re:Truss Designs
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re: Truss Designs
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM scope design/was truss tube
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re Soggy Binoculars
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Test Simulation.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Should I continue to tweak?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Another pilot experiment
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM A Millies-LaCroix Diagram for Hyperboloids?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Beginning figuring
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM: Interpreting Foucault Shadowgrams
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Longitudinal Aberration Measurement
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM TDE
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM making a multi-capable tester
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RE: Chromium or Nickel
- From: Jan Bentz <jbentz@inreach.com>
- Re: ATM Grinding Machine Help?
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM Out of topic
- From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
- Re: ATM threaded inserts
- From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
- Re: ATM Dob vs Equatorial bearing sizes
- From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
- Re: ATM Dob vs Equatorial bearing sizes
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM Ingalls Book
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM TDE
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM need help, dropped mirror
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: Chromium coating was ATM questions
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM threaded inserts
- From: "Jeffery C. Hudson" <jhudson@inreach.com>
- ATM Re: atm-digest V1 #1678
- From: "Jeffrey D. Gortatowsky" <myrocketcatos@iname.com>
- Re: ATM A book
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM A book
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM Stolen Telescopes - more information.
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM stolen scopes & security
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM stolen scopes & security
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM stolen scopes & security
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM stolen scopes & security
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM Book
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM Book
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM Plate Glass
- From: Jeremy Palmer <w6cwj@earthlink.net>
- [Fwd: ATM Postal service Billing Us for E-mail.]
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: pipe insul. was (ATM Trusses)
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Aluminum instead of ebony star for side bearings
- From: jdo348@airmail.net (Jerry Dove)
- ATM Plate Glass
- From: jdo348@airmail.net (Jerry Dove)
- ATM Grinding Grit
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Need more silicone advice (long)
- From: jdo348@airmail.net (Jerry Dove)
- ATM Grinding Grit
- From: jdo348@airmail.net (Jerry Dove)
- ATM Grinding Table top
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Freezing Your Pitch Off!
- From: Jim Fitch <jf@arn.net>
- ATM RE: Mirror Coatings
- From: Jim Fitch <jf@arn.net>
- Re: ATM New dentstone (tile) tool
- From: Jim Fitch <jf@arn.net>
- Re: ATM Newport mirror kits
- From: Jim Fitch <jf@arn.net>
- Re: ATM Tool tile shapes
- From: Jim Fitch <jf@arn.net>
- ATM TDE
- From: Jim Fitch <jf@arn.net>
- Re: ATM What is under/over correction - really?
- From: Jim Fitch <jf@arn.net>
- Re: ATM TDE
- From: Jim Fitch <jf@arn.net>
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: "Jim Fly" <flyj@iol-12.net>
- Re: [Fwd: ATM e-mail list]
- From: "Jim Fly" <flyj@iol-12.net>
- ATM CCD spec needed (sort of OT) & tTMc
- From: "Jim Warner" <warners@bgcc.com>
- Re: ATM Gears
- From: "Jim Warner" <warners@bgcc.com>
- ATM C14 referb. help , secondary R??
- From: "Jim Warner" <warners@bgcc.com>
- Re: ATM Graphite composite truss tubes
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Help on a 4.25" scope.
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Help on a 4.25" scope.
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Finished polishing, what next?
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Beginning figuring
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Seek Advice on 1st Mirror
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Aperture gains
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Trusses (was ATM truss strength: Shower rod)
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: "Joe Goins" <jgoins@cedex.com>
- ATM Microscope eyepieces
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Correcting Astigmatism with a Barlow
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Mirror Testing
- From: "Johan Vanbeselaere" <jvb@digilife.be>
- Re: ATM PLOP vs. KRIEGE-BERRY ("classsical"?) FLOATATION
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Dahl Null Test Question
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Ingalls Book
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM Stolen Telescopes - more information.
- From: "John Anderson" <anderiii@qni.com>
- ATM plaster tool tiles wearing down
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- Re: ATM Stolen Telescopes - more information.
- From: "John Ivens" <ivensj@u.arizona.edu>
- ATM Book
- From: "John Ivens" <ivensj@u.arizona.edu>
- Re: ATM driving at noncelestial rates
- From: John Roberts <jproberts@sprintmail.com>
- ATM book: ...Experimental Physics
- From: John Roberts <jproberts@sprintmail.com>
- Re: ATM electron microscope
- From: John Roberts <jproberts@sprintmail.com>
- Re: ATM HST Needs Collimation?
- From: John Vogt <atmer@idt.net>
- Re: Different sort of ATM project
- From: "Jon Bertrand"<jonb@cirris.com>
- Re[2]: Different sort of ATM project
- From: "Jon Bertrand"<jonb@cirris.com>
- Subject: Re: ATM Stolen Telescopes - ideas
- From: "Jon Bertrand"<jonb@cirris.com>
- Re: ATM A few questions before I screw my Dob together for the first time..
- From: Jon Cooper <jbcooper@gte.net>
- RE: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM Stolen Telescopes - more information.
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM stolen scopes & security
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM stolen scopes & security
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM Best eyepieces at f/4
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM Suppliers of pre-fab telescope kits
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM APO?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM Newport mirror kits
- From: Joshua White <mudge80@hotmail.com>
- ATM Advice on 10" for first project
- From: Joshua White <mudge80@hotmail.com>
- ATM Question on grinding surface stability
- From: Joshua White <mudge80@hotmail.com>
- Re: ATM Mirror Testing
- From: "k.honders" <k.honders@worldonline.nl>
- ATM unchanneled pitch-laps
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM unchanneled pitch-laps
- From: "k.honders" <k.honders@worldonline.nl>
- ATM open or closed tube
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM Barlow...
- Re: ATM Project ]I[
- Re: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during po lishing??)
- From: Ken Lowther <s0109366@cc.ysu.edu>
- RE: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure durin g po lishing??)
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Finished polishing, what next?
- From: Ken Lowther <klowther@concentric.net>
- Re: ATM Just for the record
- From: Ken Lowther <klowther@concentric.net>
- ATM The Best Optical Testing Method?
- From: Kevin McCarthy <sigma@mediaone.net>
- Re: ATM Tall 2" focusers question
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- Re: Different sort of ATM project
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- Re: ATM Re:Truss Designs
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: Different sort of ATM project
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- Re: ATM UO Mirror Cells
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- ATM Unchanneled Lap Polishing
- From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
- Re: ATM KS-87A Aerial Camera Lens As Objective?
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM explosion/OT
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM APO
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM Chromium or Nickel?
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM Source of a 4.5 inch mirror, (UK)
- From: L J Stubbs <les.stubbs@psilink.co.uk>
- Re: ATM Protostar on vacation?
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM Protostar on vacation?
- From: CELEBRON@gte.net (Larry Blair)
- ATM computer control power supply
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM UO Mirror Cells
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM Secondary mirrors
- From: CELEBRON@gte.net (Larry Blair)
- Re: ATM Grinding Grit
- From: CELEBRON@gte.net (Larry Blair)
- ATM Anodized Aluminum Truss Polls?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Looking for a 4.5 inch mirror ( UK )
- From: "Leslie Stubbs" <les@g4dbx.freeserve.co.uk>
- RE: Different sort of ATM project
- ATM A book
- Re: ATM possible new glass source - ad alert
- Re: ATM A book
- ATM Helical focuser question
- Re: ATM Mirror Coating
- Re: ATM Stolen Telescopes - more information.
- Re: ATM Helical focuser question
- RE: ATM Helical focuser question
- Re: ATM threaded inserts
- Re: ATM Helical focuser question
- Re: ATM Helical focuser question
- Re: ATM Best eyepieces at f/4
- Re: ATM Alternatives to Newtonians
- Re: ATM Helical focuser question
- Re:ATM Of burglars and other mental giants.
- Re: ATM OFF TOPIC: Worms
- Re: ATM gluing polyurethane finished plywood
- Re: ATM How thick can RTV pads be?
- ATM Barlow quality & odd list behavior
- Re: ATM Barlow quality & odd list behavior
- ATM Type of abrasive
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Appropriate barlow ?s
- ATM Just for the record
- Re: ATM Appropriate barlow ?s
- Re: ATM Barlows - ON topic? - How to make parfocal?
- Re: ATM Just for the record
- ATM Tool tile shapes
- ATM Dob vs Equatorial bearing sizes
- Re: ATM Barlow quality & odd list behavior
- Re: ATM Dob vs Equatorial bearing sizes
- Re: ATM Tool tile shapes
- ATM What is under/over correction - really?
- ATM True or False
- Re: ATM What is under/over correction - really?
- Re: ATM Tom Krajci's Ball Eyepiece, Ball lens source
- ATM Abrasives uniformity
- Re: ATM Abrasives uniformity
- ATM Sur[lus optics
- ATM Zones and wave error
- Re: ATM Parabolising - different methods - merits
- ATM Focal length
- ATM Looking for this
- Re: ATM Focal length
- Re: ATM The cost of Dave's telescope
- ATM Interpretting Ingalls
- Re: ATM Pouring concrete - the basics
- Re: ATM RKE eyepieces
- ATM Cheapo lense from American
- Re: ATM Pouring concrete - the basics
- ATM Blank statistics?
- ATM Making a finder
- ATM Is there a ray tracing program?
- RE: ATM What's Best Material to Create a Tool?
- ATM Lens discoloration
- ATM Anybody familiar with LensCad?
- Re: Re[2]: ATM Optics Question from a Newbie
- Re: ATM HST Needs Collimation?
- From: "Loren A. Busch" <LBusch@ix.netcom.com>
- ATM need help, dropped mirror
- From: luis garcia <igusus@hotmail.com>
- No Subject
- From: Luiz Duczmal <duczmal@poisson.est.ufmg.br>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM A few questions before I screw my Dob together for the firsttime..
- From: "Marinus A. (Rien) van der Lugt" <marinus@lugt.freeserve.co.uk>
- Re: ATM Ingalls Book
- From: "Marinus A. (Rien) van der Lugt" <marinus@lugt.freeserve.co.uk>
- Re: ATM IEEE1394 (firewire) and pulse counting
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- ATM Re: [OT] Satellite Crossings
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Stellafane Endangered!
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM RE: Common Sence Endangered!
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- ATM Artificial Star for Testing
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Artificial Star for Testing (Long)
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Artificial Star for Testing (Long)
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Pouring concrete - the basics
- From: Mark Kaye <mark.kaye@sympatico.ca>
- ATM What's Best Material to Create a Tool?
- From: tyr2490@tyler.net (Mark Migura)
- ATM Seek Advice on 1st Mirror
- From: tyr2490@tyler.net (Mark Migura)
- ATM Plate Glass or Pyrex for 1st Time Grinder
- From: tyr2490@tyler.net (Mark Migura)
- RE: ATM Stellafane Endangered!
- From: Maryann Arrien <marrien@computer.net>
- ATM Re:
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: truss tubes
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Advice on Secondary Sizing
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Aperture gains
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Advice on Secondary Sizing
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: Dawes Limit
- From: Mel Bartels <mbartels@efn.org>
- Re: Different sort of ATM project
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM A book
- From: Mel Bartels <mbartels@efn.org>
- ATM possible new glass source - ad alert
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM I was wondering about a book
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: atm-digest V1 #1663
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM IEEE1394 (firewire) and pulse counting
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Star test questions...
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Motorized declination drive
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Unchanneled Lap Polishing.
- From: Mel Bartels <mbartels@efn.org>
- ATM msg from list owner re: equipment reviews
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Just for the record
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Barlow quality & odd list behavior
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Barlow quality & odd list behavior
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Barlow quality & odd list behavior
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: atm-digest V1 #1678
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM True or False
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Parabolising - different methods - merits
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Abrasives uniformity
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Houghton at the Grand Canyon (aka Telescope Windows)
- From: Mel Bartels <mbartels@efn.org>
- ATM msg from list owner on Stellafane discussion
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM RE: Chromium or Nickel
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM RE: Chromium or Nickel
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM RE: Chromium or Nickel
- From: Mel Bartels <mbartels@efn.org>
- [Fwd: ATM e-mail list]
- From: Mel Bartels <mbartels@efn.org>
- ATM overcoating services
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Optics Question from a Newbie
- From: Mel Bartels <mbartels@efn.org>
- ATM looking for books on small lenses
- From: Mel Bartels <mbartels@efn.org>
- ATM Wheels for Dob
- From: "mhamp" <mhamp@bellsouth.net>
- ATM Re: Lap making with a soldering iron...
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Parkerizing - simple - relatively safe.
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM removing pitch from tool
- From: Michael Coslo <mjc5@psu.edu>
- Different sort of ATM project
- From: Michael Coslo <mjc5@psu.edu>
- RE: Different sort of ATM project
- From: Michael Coslo <mjc5@psu.edu>
- Re: Different sort of ATM project
- From: Michael Coslo <mjc5@psu.edu>
- Re: Different sort of ATM project
- From: Michael Coslo <mjc5@psu.edu>
- Re: Different sort of ATM project
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Stolen Telescopes - more information.
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Finished polishing, what next?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM stolen scopes & security
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM stolen scopes & security and apology to the list
- From: Michael Coslo <mjc5@psu.edu>
- ATM Silvering Disaster
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Burgundy Pitch
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM How thick can RTV pads be?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM gluing polyurethane finished plywood
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Unchanneled Lap Polishing
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Alternatives to Newtonians
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Unchanneled Lap Polishing
- From: Michael Coslo <mjc5@psu.edu>
- ATM BVC Impressions
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Burgundy Pitch
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM BVC Impressions
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Unchanneled Lap Polishing
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Barlow quality & odd list behavior
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Barlow quality & odd list behavior
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Stellafane Endangered!
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Seek Advice on 1st Mirror
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Seek Advice on 1st Mirror
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM RE: Common Sence Endangered!
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Advice on 10" for first project
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM mirror covers
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Pouring concrete - the basics
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM RKE eyepieces
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Need more silicone advice (long)
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Pads/Pitch
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM HST Needs Collimation?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Question on grinding surface stability
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM RKE eyepieces
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Grinding Table top
- From: Michael Coslo <mjc5@psu.edu>
- Re[2]: ATM Optics Question from a Newbie
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM SCT mirror flop - how about shims?
- From: Michael Coslo <mjc5@psu.edu>
- Re[2]: ATM Optics Question from a Newbie
- From: Michael Coslo <mjc5@psu.edu>
- ATM Stolen Telescopes!!
- From: Michael Davis <mdavis19@ix.netcom.com>
- ATM Stolen Telescopes - more information.
- From: Michael Davis <mdavis19@ix.netcom.com>
- ATM Stolen Telescopes - Humor
- From: Michael Davis <mdavis19@ix.netcom.com>
- ATM Salvaging an optical window.
- From: Michael Davis <mdavis19@ix.netcom.com>
- Re: ATM Wheels for Dob
- From: Michael Gregory <mikeg@airmail.net>
- ATM Speaking of Dob Bearings
- From: Michael Gregory <mikeg@airmail.net>
- Re: ATM Dob vs Equatorial bearing sizes
- From: Michael Gregory <mikeg@airmail.net>
- Re:ATM Of burglars and other mental giants.
- From: "Michael J. Wolford" <mwolford@ccrtc.com>
- Re: ATM Suppliers of pre-fab telescope kits
- From: "Michael J. Wolford" <mwolford@ccrtc.com>
- Re: ATM Looking for this
- From: Michael Lindner <mikel@att.net>
- ATM Foucault Tester and RTV advice
- From: Michael Lindner <mikel@att.net>
- Re: ATM TM reprints
- From: Michael Lindner <mikel@att.net>
- Re: ATM Is there a ray tracing program?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Optics Question from a Newbie
- From: Michael Lindner <mikel@att.net>
- Re: ATM threaded inserts
- From: Michael McKee <msmckee@iname.com>
- Re: ATM Grinding Machine Help?
- From: Michael McKee <msmckee@iname.com>
- Re: ATM Aperture, focal length and airy's disk
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM metric dial gage and TEX program
- From: "Michael P. Lindner" <mikel@att.net>
- ATM UO Mirror Cells
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Aluminum instead of ebony star for side bearings
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Couder mask program
- From: "Michael P. Lindner" <mikel@att.net>
- ATM Ungluing Diagonal
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Book
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Ungluing Diagonal
- From: "Michael P. Lindner" <mikel@att.net>
- ATM How thick can RTV pads be?
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM BVC Impressions
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM How thick can RTV pads be?
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM f/ what?
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Secondary mirrors
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Barlow...
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Newport mirror kits
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Longitudinal Aberration Measurement
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Newport mirror kits
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM : what is Coma
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM : what is Coma
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Suppliers of pre-fab telescope kits
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Airline travel scope confusion
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Tube connectors
- From: "Michael P. Lindner" <mikel@att.net>
- Re: ATM Silvering check list: please help
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Silvering check list: please help
- From: Michael Pankratz <papilio1@juno.com>
- ATM Tube connectors
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Silvering check list: please help
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Tube connectors
- From: Michael Pankratz <papilio1@juno.com>
- ATM Grinding Machine Help?
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Generator
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM HST Needs Collimation?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM HST Needs Collimation?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM f/ what
- From: "Michael Perata" <michaelp@p-solutions.com>
- Re: ATM Pouring concrete - the basics
- From: "Michael Perata" <michaelp@p-solutions.com>
- Re: ATM OFF TOPIC: Worms
- From: "Michael Perata @ p-solutions" <michaelp@p-solutions.com>
- Re: ATM Unchanneled Lap Polishing.
- From: "Michael Perata @ p-solutions" <michaelp@p-solutions.com>
- Re: ATM Stolen Telescopes - more information.
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Motors and encoders
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: Different sort of ATM project
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM stolen scopes & security
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM sub-diameter grinding
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM Motorized declination drive
- From: "Mick & Sal" <clements@cairns.net.au>
- ATM Spherising.
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: ATM Question on grinding surface stability
- From: "Mick & Sal" <clements@cairns.net.au>
- Re: Different sort of ATM project
- From: Mike Coslo <mjc5@psu.edu>
- Re: Different sort of ATM project
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Another pilot experiment
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Silvering Disaster
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Barlow quality & odd list behavior
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Barlow...
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Tool tile shapes
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Speaking of Dob Bearings
- From: Mike Coslo <mjc5@psu.edu>
- Re: SV: ATM Barlow...
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Re: atm-digest V1 #1678
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Asaf's visit
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Parabolising - different methods - merits
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Silvering check list: please help
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Pads/Pitch
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Optics Question from a Newbie
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Baffle
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Helical focuser question
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Nylon sleeves for truss tubes
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM scope design/was truss tube
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Stolen Telescopes - more information.
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Best eyepieces at f/4
- From: "Mike Marchand" <bmarchan@mnsi.net>
- ATM Re: "odd" list behavior
- From: Monty MaGill <103375.2444@compuserve.com>
- Re: ATM Abrasives uniformity
- From: Monty MaGill <103375.2444@compuserve.com>
- Re: ATM RKE eyepieces
- From: more than meets the eye <meeteye@yahoo.com>
- ATM Mirror Coating
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Mirror Testing
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Pads/Pitch
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- Re: ATM Out of topic
- Re: ATM Help on a 4.25" scope.
- ATM Backlash Problem
- Re: ATM A few questions before I screw my Dob together for the firsttime..
- Re: SV: ATM A few questions before I screw my Dob together for thefirst time..
- Re: ATM HST Needs Collimation?
- Re: ATM Silvering Disaster
- From: Nick Martin <bonnyton@ednet.co.uk>
- ATM silvering safety warning
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM plaster tool tiles wearing down
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: Chromium coating was ATM questions
- From: Nick Martin <bonnyton@ednet.co.uk>
- ATM Colimnating a Newtonian with a perforated mirror?
- From: Nick Martin <bonnyton@ednet.co.uk>
- ATM Collimnating a Newtonian with central perforation.
- From: Nick Martin <bonnyton@ednet.co.uk>
- SV: ATM Dawes Limit
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: Different sort of ATM project
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: SV: Different sort of ATM project
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Different sort of ATM project - pilot experiment
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM Another pilot experiment
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM SV: Another pilot experiment-erratum
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Another pilot experiment
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Barlow...
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM A few questions before I screw my Dob together for the first time..
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Colimnating a Newtonian with a perforated mirror?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM removing pitch from tool
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- Re: ATM removing pitch from tool
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- RE: ATM Starfish shaped lap for parabolising
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- Re: ATM grinding machine
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- ATM Grinding Machine
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- RE: ATM truss strength: Shower rod
- From: Olivier Biot <olivier@zeus.rug.ac.be>
- ATM What is it about my mirror coating?
- From: "Olle" <olle.eriksson@telia.com>
- ATM How to make a heat coil to reduce dew?
- From: "Olle Eriksson" <olle.eriksson@telia.com>
- ATM Book recommendations?
- From: "Patricia Malone" <patmalone@earthlink.net>
- Re: ATM Barlow quality & odd list behavior
- From: "Patrick O'Connolly" <poc@hevanet.com>
- RE: ATM Tall 2" focusers question
- From: Paul LeFevre <paull@lucasarts.com>
- ATM -- Protostar Diagonals
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Baffle
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Helical focuser question
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Dob vs Equatorial bearing sizes
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Airline travel scope confusion
- From: Paul LeFevre <paull@lucasarts.com>
- [ATM] TravelScope plans up On-Line
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Seek Advice on 1st Mirror
- From: Paul LeFevre <paull@lucasarts.com>
- Re: ATM Barlow quality & odd list behavior
- From: Paul&Kim Weiler <kwpw@earthlink.net>
- Re: ATM Suppliers of pre-fab telescope kits
- From: Paul&Kim Weiler <kwpw@earthlink.net>
- ATM Sedona AZ high school project on parabolization
- From: Peter Abrahams <telscope@europa.com>
- ATM Zerodur blank FS:
- From: "Peter Bealo" <pbealo@mediaone.net>
- Re: ATM Anodized Aluminum Truss Polls?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM powder coating.
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM bluing steel
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM A book
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Anodising
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Sur[lus optics
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: Generator (was ATM Blank statistics?)
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM RTMC
- From: notpete@scn.org (Peter Hirtle)
- ATM TM reprints
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Generator
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Generator
- From: notpete@scn.org (Peter Hirtle)
- ATM Parkerizing - simple - relatively safe.
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Mirror Testing
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Shearing Interferometer - interpretation
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM RKE eyepieces
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM RKE eyepieces
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Generator and El Cheapo diamond tooling
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Re: atm-digest V1 #1688
- From: "Phil Marcus" <pmarcus@wt.net>
- ATM Back to the Grind
- From: "Phil Marcus" <pmarcus@wt.net>
- Re: ATM Grinding Machine Help?
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM Grinding Grit
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM Stolen Telescopes - more information.
- From: Randy Johnson <RJohnson@radarinc.com>
- RE: ATM Stolen Telescopes - more information.
- From: Randy Johnson <RJohnson@radarinc.com>
- Re: ATM Re:truss tubes-designs
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Re: atm-digest V1 #1663
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Mirror Testing
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Finished polishing, what next?
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Mirror Testing
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Starfish shaped lap for parabolising
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Houghton and Seeing
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: RE[2]: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Re: atm-digest V1 #1688
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Glass Bricks?
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Pads/Pitch
- From: Ricardo Dunna <rdunna@infolink.com.br>
- RE: 1/3 stroke turns to be 2/3 stroke (was RE: ATM Pressure during po lishing??)
- From: "Richard Ozer" <rozer@ousd.k12.ca.us>
- RE: ATM Chabot still at old location?
- From: "Richard Ozer" <rozer@ousd.k12.ca.us>
- Re: ATM Questions on baffling/painting first scope.
- From: "Richard Rovelstad" <Richard.Rovelstad@worldnet.att.net>
- ATM A few questions before I screw my Dob together for the first time..
- From: "Richard Rovelstad" <Richard.Rovelstad@worldnet.att.net>
- ATM Spin Casting Mirrors -- in Space!
- From: Richard Schwartz <richas@idt.net>
- ATM Restoring Channels in Tile Tools
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Barlow quality & odd list behavior
- From: Richard Schwartz <richas@idt.net>
- Re: ATM Longitudinal Aberration Measurement
- From: Richard Schwartz <richas@idt.net>
- Subject: ATM TM reprints
- From: Richard Schwartz <richas@idt.net>
- Re: ATM How thick can RTV pads be?
- From: Robert Santore <santore@ibm.net>
- Re: ATM Barlow quality & odd list behavior
- From: Robert Santore <santore@ibm.net>
- ATM Suppliers of pre-fab telescope kits
- From: "Robin Roberts" <rdrober@uswest.com>
- Re: ATM Suppliers of pre-fab telescope kits
- From: "Robin Roberts" <rdrober@uswest.com>
- Re: ATM powder coating.
- From: Rocky <wb5ftr@greatwhite.com>
- Re: ATM Helical focuser question
- From: Rocky <wb5ftr@greatwhite.com>
- Re: ATM Helical focuser question
- From: Rocky <wb5ftr@greatwhite.com>
- Re: ATM Alternatives to Newtonians
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM Alternatives to Newtonians
- From: Rod Brackenridge <rjb@netconnect.com.au>
- ATM Alternatives to Newtonians
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM Dahl Null Test Question
- From: Rod Brackenridge <rjb@netconnect.com.au>
- ATM RE: Achromatic Testing
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Testing an Achromat
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Houghton-Newtonian a.k.a. Closed Tube Telescope
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM ZEMAX and R-C Testing
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Protostar? Call Crazy Ed!
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Freezing Your Pitch Off!
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Houghtons
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Re: atm-digest V1 #1662
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Mirror Coatings
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Houghton at the Grand Canyon (aka Telescope Windows)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Stellafane Endangered!
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Stellafane and Other Precious Sites
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Houghton and Seeing
- From: Roger Ceragioli <rogerc@dakotacom.net>
- RE: ATM Interpretting Ingalls
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Re: open or closed tube
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM HST Needs Collimation?
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Tool tile shapes
- From: "Roger Herzler" <rherzler@cts.com>
- Re: Different sort of ATM project
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: Different sort of ATM project
- From: Roger West <westr@cherokee.nsuok.edu>
- Re: ATM Anodized Aluminum Truss Polls?
- From: "Ron Newman" <ronaldn@ptd.net>
- ATM Bartels type hand paddle pin out
- From: Ronald Muir <rmuir@netarrant.net>
- Re: ATM Anodising
- From: Ronald Newman <ronaldn@ptd.net>
- Re: ATM Helical focuser question
- From: Ross Orr/Margaret Wong <rotohut@ic.net>
- RE: ATM A few questions before I screw my Dob together for the first time..
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- RE: ATM A few questions before I screw my Dob together for the first time..
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- RE: ATM Copier Scope
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- Re: ATM Baffle
- From: rudy@cae.ca (Rudy Taraschi)
- ATM Yet another free CAD package
- From: rudy@cae.ca (Rudy Taraschi)
- ATM: Grinding on the road...
- From: "Ryan Hess" <atmryan@excite.com>
- ATM: [OT] Satellite Crossings
- From: "Ryan Hess" <atmryan@excite.com>
- Re: ATM UO Mirror Cells
- From: "Ryan Hess" <atmryan@excite.com>
- ATM Unchanneled Lap Polishing.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Unchanneled Lap Polishing.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Unchanneled Lap Polishing.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Crayford focuser
- From: "Sam Michael" <samm@idcomm.com>
- ATM Barlows - ON topic? - How to make parfocal?
- Re: ATM Barlow...
- Re: ATM Stolen Telescopes - more information.
- From: "Sarel P. Wagner" <sarel@microafrica.co.za>
- ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- Re[2]: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- Re[2]: ATM Optics Question from a Newbie
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM RE: Common Sence Endangered!
- From: "Scordato, Thomas" <TSCORDA@alleghenypower.com>
- Re: ATM scope design/was truss tube
- From: scott.barrie@cimtegration.com (Scott Barrie)
- Re: ATM 85 1/4?
- From: scott.barrie@cimtegration.com (Scott Barrie)
- ATM Motors and encoders
- From: Scott Berfield <atm@berfield.com>
- ATM RTMC
- From: Scott Berfield <atm@berfield.com>
- Re: ATM RTMC
- From: Scott Berfield <atm@berfield.com>
- Re: ATM Another pilot experiment
- From: Scott Berfield <atm@berfield.com>
- Re: ATM Fiber Optic Cable/Dial Indicators
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM A Millies-LaCroix Diagram for Hyperboloids?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Ungluing Diagonal
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM: Interpreting Foucault Shadowgrams
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Alternatives to Newtonians
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM New dentstone (tile) tool
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Unchanneled Lap Polishing
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM plaster tool tiles wearing down
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Barlow quality & odd list behavior
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- RE: ATM Barlow quality & odd list behavior
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM What is under/over correction - really?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM What is under/over correction - really?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Longitudinal Aberration Measurement
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM TDE
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Glass Bricks?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Book
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Book
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Stolen Telescopes - more information.
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Tube connectors
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM 20" Project website started
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Looking for this
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Construction of Telrad
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM 1st mirror: 8" or 10"
- From: Shannon Hughes <sr.hughes@worldnet.att.net>
- RE: ATM Stolen Telescopes - more information.
- From: Shawn Arbuckle <arbuckles@exponent.com>
- ATM sub-diameter grinding
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Tom Krajci's Ball Eyepiece, Ball lens source
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Chromium Reflectivity
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Comet Catcher Help!
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Comet Catcher Help
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Chromium or Nickel
- From: "Sidor . Kurt" <KSidor@drc.com>
- RE: ATM RE: Chromium or Nickel
- From: "Sidor . Kurt" <KSidor@drc.com>
- Re: ATM Secondary mirrors
- From: Simon Loy <sloy@vcn.bc.ca>
- ATM Ordering plate glass from local supplier...Other suggestions?
- ATM Surprize
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM 85 1/4?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM 85 1/4?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM OK
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Scope pages
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Mirror Mounting
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Mirror Mounting
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Project ]I[
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Motorized declination drive
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM Motorized declination drive
- From: "Spencer Roedder" <roedder@roedder.com>
- ATM Need more silicone advice (long)
- From: "Spencer Roedder" <roedder@roedder.com>
- ATM Motorized declination drive
- From: Spencer Roedder <roedder@roedder.com>
- Re: Re[2]: ATM Motorized declination drive
- From: Spencer Roedder <roedder@roedder.com>
- Re: ATM 85 1/4?
- From: Spencer Roedder <roedder@roedder.com>
- ATM Update
- From: spinney@pwshift.com
- ATM Burgundy Pitch
- From: spinney@pwshift.com
- Re: ATM Burgundy Pitch
- From: spinney@pwshift.com
- ATM Copier Scope
- From: spinney@pwshift.com
- ATM Copier Scope
- From: spinney@pwshift.com
- Re: ATM Stellafane Endangered!
- From: "steblina" <steblina@televar.com>
- ATM HELP!
- From: "Steere, Andy" <SteereL@umsystem.edu>
- Re: ATM Radioactive telescope
- From: "Stephen F. Murray" <sfm@home.net>
- ATM Re: atm-digest V1 #1663
- From: Stephen Russell <smr@cse.unsw.edu.au>
- ATM Re: KS-87A Aerial Camera Lens As Objective?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM A book
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM A book
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM threaded inserts
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Tool tile shapes
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Looking for a 4.5 inch mirror ( UK )
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM questions
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM Porthole Parameters for PLOP
- From: Stephen Vegos <yovw@cdsnet.net>
- Re: ATM Barlow quality & odd list behavior
- From: Stephen Vegos <yovw@cdsnet.net>
- ATM Theft
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- Subject: RE: ATM truss strength: Shower rod
- From: tasimmons@west.raytheon.com
- Re: ATM RTMC
- From: "tdfullmoon" <tdfullmoon@koan.com>
- Re: ATM Baffle
- From: "tdfullmoon" <tdfullmoon@koan.com>
- Re: ATM Grinding Machine Help
- From: Terrance G Bondy <bondys@netrover.com>
- ATM Portable Mount for Camera?
- From: tg@utstat.toronto.edu
- Re: ATM Just for the record
- From: tg@utstat.toronto.edu
- Re: ATM Spin Casting Mirrors -- in Space!
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM metric dial gage and TEX program
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: SV: Different sort of ATM project
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM stolen scopes & security
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM stolen scopes & security
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM OFF TOPIC: Worms
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Microscope eyepieces
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Tool tile shapes
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Abrasives uniformity
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Copier Scope
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Seek Advice on 1st Mirror
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Silvering check list: please help
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM TM reprints
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Pads/Pitch
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Mirror Mounting
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Aperture gains
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: Different sort of ATM project
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM 6inch F4
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Stolen Telescopes - more information.
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Star test questions...
- From: "Thomas A. Moulton" <tmoulton@gte.net>
- Re: ATM Microscope eyepieces
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Barlow quality & odd list behavior
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM OK
- From: "Thomas A. Moulton" <tmoulton@gte.net>
- Re: ATM Seek Advice on 1st Mirror
- From: "Thomas A. Moulton" <tmoulton@gte.net>
- Re: ATM Grinding Table top
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM KS-87A Aerial Camera Lens As Objective?
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM A Millies-LaCroix Diagram for Hyperboloids?
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Generator
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Ingalls Book
- From: Thomas Rutherford <ruthert@3wave.com>
- Re: ATM Barlow...
- From: Tim Walters <trwalters@mindspring.com>
- ATM soggy binoculars
- From: Timotheus <salo@dataparc.com>
- ATM Re:Truss Designs
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: Different sort of ATM project
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM A Millies-LaCroix Diagram for Hyperboloids?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Book
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM sub-diameter grinding
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Alt/Az Autoguiding
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Barlow quality & odd list behavior
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- RE: ATM Starfish shaped lap for parabolising
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Barlow quality & odd list behavior
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM making a multi-capable tester
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Pouring concrete - the basics
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Foucault Tester and RTV advice
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM SCT mirror flop - how about shims?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Making a finder
- From: "Tomas Maruska" <maruska@posam.sk>
- No Subject
- From: "Tomas Maruska" <maruska@posam.sk>
- ATM Construction of Telrad
- From: "Tomas Maruska" <maruska@posam.sk>
- RE: ATM Abrasives uniformity (PSD)
- From: "Tony Cecce" <tonycc@exotrope.net>
- Re: ATM Telescope making program
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Aperture gains
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Baffle
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: Different sort of ATM project
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Mirror Coating
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Plate Glass
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Barlow quality & odd list behavior
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Barlow quality & odd list behavior
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM True or False
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Postal service Billing Us for E-mail.
- From: "Tony Dunlap" <banjo2@bright.net>
- Re: ATM Colimnating a Newtonian with a perforated mirror?
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Telescope pictures
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM OOPS Telescope pictures
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM OOPS OOPS Telescope pictures
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM Chromium or Nickel?
- Re: ATM possible new glass source - ad alert
- ATM Mirror Test Program
- ATM Engineer Joke
- Re: ATM Unchanneled Lap Polishing.
- ATM Parabolic correction devices
- Re: ATM need help, dropped mirror
- Re: ATM Postal service Billing Us for E-mail.
- RE: ATM Dall Null Test
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Plate Glass or Pyrex for 1st Time Grinder
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Pads/Pitch
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Blank statistics?
- From: "Wagner,Rick [CIS]" <Rick.Wagner@EC.GC.CA>
- ATM Mounting refractor lenses
- From: "Walter Banks" <walter@bytecraft.com>
- ATM Airline travel scope confusion
- From: "William E. Hemple" <hemple@erols.com>
- RE: ATM Copier Scope
- From: "William E. Hemple" <hemple@erols.com>
- Re: ATM msg from list owner on Stellafane discussion
- From: "William E. Hemple" <hemple@erols.com>
- ATM threaded inserts
- From: Wim Schmidt <wschmidt@knoware.nl>
- ATM threaded inserts
- From: Wim Schmidt <wschmidt@knoware.nl>
- Re: ATM How thick can RTV pads be?
- From: Wim Schmidt <wschmidt@knoware.nl>
Mail converted by MHonArc 2.1.0