Amateur Telescope Makers (ATM) Archive for JUN98 - by author
- No Subject
- From: "Hans Göran Lindberg" <hans-goran.lindberg@vasteras.mail.telia.com>
- ATM Which grid to start with?
- From: Achim Schaller <acschaller@geocities.com>
- Re: ATM Which grid to start with?
- From: Achim Schaller <acschaller@geocities.com>
- Re: ATM Foucault testing : confusion
- From: Achim Schaller <acschaller@geocities.com>
- Re: ATM where to start
- From: Adams <adams@rmci.net>
- Re: ATM 6" or 8" mirror
- From: Adams <adams@rmci.net>
- ATM atm ground- to deep
- From: Adams <adams@rmci.net>
- Re: ATM rotating mirror/tool instead of walking around them
- From: Adams <adams@rmci.net>
- Re: ATM Correcting the Hyperbola
- From: Adams <adams@rmci.net>
- RE: ATM rotating mirror/tool instead of walking around them
- From: Adams <adams@rmci.net>
- Re: ATM Compessed gas mirror cleaner
- From: Adams <adams@rmci.net>
- ATM oxygen tank = mirror cleaner?
- From: Adams <adams@rmci.net>
- Re: Re[no]: ATM oxygen tank = mirror cleaner?
- From: Adams <adams@rmci.net>
- RE: ATM Foucault testing : confusion
- From: Adams <adams@rmci.net>
- ATM atm service
- From: Adams <adams@rmci.net>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Adams <adams@rmci.net>
- ATM Tubes
- From: Andrea Salati <asalati@tsc4.com>
- Re: ATM Best TM Books/Kits/Parts, etc.
- From: Andrew Lin <alin@qualcomm.com>
- Re: ATM tube length
- From: Andrew Lin <alin@qualcomm.com>
- ATM Re: Focuser Baffling
- From: Andrew.Martyn@dao.defence.gov.au
- ATM Re: Focuser Baffling
- From: Andrew.Martyn@dao.defence.gov.au
- ATM Re: Focuser Baffling
- From: Andrew.Martyn@dao.defence.gov.au
- ATM Re: 8" mirror in 9"tube
- From: Andrew.Martyn@dao.defence.gov.au
- ATM RTV - What Brand
- From: Andrew.Martyn@dao.defence.gov.au
- ATM When to re-coat your mirror
- From: Andrew.Martyn@dao.defence.gov.au
- Re:ATM Computer Control help needed
- From: Andrew.Martyn@dao.defence.gov.au
- ATM Archives updated for May 1998
- From: "Andy Steere" <andy@www.system.missouri.edu>
- ATM Archive update for June will be late
- From: "Andy Steere" <andy@www.system.missouri.edu>
- ATM Filtering a non acromat
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM Filtering a non acromat
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM Filtering a non acromat
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM Building a spectrohelioscope
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM Filtering a non acromat
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM Filtering a non acromat
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- Re: ATM 220v synchronous motor
- From: Antonio de Ugarte Postigo <ugarte@mad.servicom.es>
- ATM New Web Page
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM homemade finder
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM newbie
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Cost of making a 8" telescope
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Gregorian Plans. - VERY LARGE DC supplies. - Bunch-O-Questions.
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Suggestion for a telescope chair
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Thanks to everyone (Re. Where to start)
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Gregorian design
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM 6" or 8" mirror
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Vixen Lanthanum Zoom Eyepiece vs. Televue Zoom
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM In need of information
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Ray Tracing Software
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM tube length
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Source for grinding polishing compounds?
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Ray Tracing Software
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Source for grinding polishing compounds?
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Re: Grinding Supplies
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Introducing myself
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM which one first
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Compound plate-glass mirrors
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM Kydex Plastic
- From: Ari <Ari@birmingham-us.crosswinds.net>
- Re: ATM the 7mm exit pupil myth
- From: Ari <Ari@birmingham-us.crosswinds.net>
- ATM Mel Bartel's 19 June Presentation to the Atlanta Astronomy Club; Bill Bass, Please Email Home
- From: Art Russell <artrussell@mindspring.com>
- ATM Mount for 6"
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Re: Alice
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Re: Deep Impac - Off topic
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Rich Field Theory
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Sketches
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM The Thing!!!
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM 6" Equatorial mount
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Focal Length Checking
- From: "Asaf S.-T." <asafs@ibm.net>
- Re: ATM Focal Length Checking
- From: "Asaf S.-T." <asafs@ibm.net>
- Re: ATM I'm going to start
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Re: OTA Geometry
- From: "Asaf S.-T." <asafs@ibm.net>
- Re: ATM Focal Length Checking
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM 20" mirror
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM My design
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM My design
- From: "Asaf S.-T." <asafs@ibm.net>
- An ATM Program
- From: "Asaf S.-T." <asafs@ibm.net>
- ATM Re: atm-digest V1 #1175
- ATM Journal
- ATM Re: atm-digest V1 #1196
- ATM Re: atm-digest V1 #303
- ATM Cost of making a 8" telescope
- From: Balaji Ramani <balajir@paul.rutgers.edu>
- ATM Mat pitch lap
- From: Balaji Ramani <balajir@paul.rutgers.edu>
- ATM Minimum tools required
- From: Balaji Ramani <balajir@paul.rutgers.edu>
- ATM Truss vs. tube
- From: Balaji Ramani <balajir@paul.rutgers.edu>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Balaji Ramani <balajir@paul.rutgers.edu>
- RE: ATM sixteen inch: bubble trouble?
- From: "Bass, Bill" <bbass@LibertyCorp.com>
- ATM Dall-Kirkham Cassegrain Questions
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Thanks for DK Cassegrain Advise
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Thanks for DK Cassegrain Advise
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Baffle Design References
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM DK Cass Questions II
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Hindle Sphere
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- RE:ATM DK Cass Questions II
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- Re: ATM Crazy Ed
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Getting and keeping big glass at ambient
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Dall-Kirkham Cassegrain Questions
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM Re: Grinding Machine
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM Grinding Machine
- From: Bill Marriott <btk@pacbell.net>
- Re:more ATM Grinding Machine Questions
- From: Bill Marriott <btk@pacbell.net>
- ATM Newbie Question
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Kitchen interferometry
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM Kitchen interferometry
- From: Bill McHale <wmchal1@umbc.edu>
- ATM Bying Mirror Blanks in EU ?
- From: "Birthe & Anders Eisum" <eisum@image.dk>
- Re: ATM Which Wood Would you use?
- From: Bob Lombardi <blombard@iu.net>
- ATM RE: introduction and some questions
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM newbie
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM help with eyepiece choice
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Can you help me?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cost of making a 8" telescope
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Cost of making a 8" telescope
- From: BOB PRABOWO <BOB@bahana.co.id>
- ATM Pitching
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM atm ground- to deep
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM atm ground- to deep (correction)
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Source for grinding polishing compounds?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Source for grinding polishing compounds?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Source for grinding polishing compounds?
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM rotating mirror/tool instead of walking around them
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM rotating mirror/tool instead of walking around them
- From: BOB PRABOWO <BOB@bahana.co.id>
- ATM Foucault testing : confusion
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Kydex Plastic
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Foucault testing : confusion
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM Foucault testing : confusion
- From: BOB PRABOWO <BOB@bahana.co.id>
- ATM parabolizing
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM parabolizing
- From: BOB PRABOWO <BOB@bahana.co.id>
- RE: ATM My design
- From: BOB PRABOWO <BOB@bahana.co.id>
- ATM Can you help me?
- ATM Star testing/Benchmarking
- ATM Teflon source
- ATM Compessed gas mirror cleaner
- ATM Newt optimization info for comment
- Re: ATM Sucking vs. Blowing
- ATM Dealing with McMaster-Carr
- ATM NASA-GSFC Raw Data On Light Absorption Paints
- Re: ATM White Power!
- ATM 3M Black Velvet no longer made
- Re: ATM edgepoint under Milles-Lacroix, what to do?
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Thanks for DK Cassegrain Advise
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Corrector Plate Testing
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Thanks for DK Cassegrain Advise
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Corrector Plate Testing
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM DK Cass Questions II
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Field of View Diameter
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Getting and keeping big glass at ambient
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Getting and keeping big glass at ambient
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Sucking vs. Blowing
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Getting and keeping big glass at ambient
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Newt optimization
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM When to re-coat your mirror
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Newt optimization
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM "Tubular" Grinding Tools
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Newt optimization
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Maksutov corrector/sticker shock
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Maksutov corrector/sticker shock
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Focal Length Checking
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM Grinding Machine
- From: Bratislav Curcic <epabcc@epa.ericsson.se>
- Re: ATM help with eyepiece choice
- From: Brent Russell <brussel@global.co.za>
- ATM Gear Ratios for Eq..
- From: Brent Russell <brussel@global.co.za>
- Re: ATM:12 inch mirror test questions
- From: Brent Russell <brussel@global.co.za>
- ATM Computer Control help needed
- From: Brent Russell <brussel@global.co.za>
- Re: ATM I'm going to start
- From: Brent Russell <brussel@global.co.za>
- Re: ATM Focal Length Checking
- From: Brent Russell <brussel@global.co.za>
- Re: ATM resistance of heater
- From: Brent Russell <brussel@global.co.za>
- Re: ATM Best TM Books/Kits/Parts, etc.
- From: Brian Banicki <banicki@suninternet.com>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: "Brian L. Nestel" <blast@aloha.net>
- Re: ATM Re: atm-digest V1 #1210
- From: "Brian L. Nestel" <blast@aloha.net>
- Re: ATM White Power!
- From: "Brian L. Nestel" <blast@aloha.net>
- Re: ATM QuickCam for Astrophotography
- From: Brian Nestel <blast@aloha.net>
- Re: ATM copyscope
- From: Brian Nestel <blast@aloha.net>
- Re: ATM oxygen tank = mirror cleaner?
- From: Brian Nestel <blast@aloha.net>
- ATM test don't reply
- From: Brian Nestel <blast@aloha.net>
- Re: ATM threaded inserts for truss tubes- where?
- From: Brian Nestel <blast@aloha.net>
- request: ATM FAQ
- From: brush11@juno.com (Brian Rush)
- Re: ATM Newt optimization info for comment
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Newt optimization
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- ATM Printing from Ronchi.exe
- Re: ATM Maksutov corrector/sticker shock
- Re: ATM Maksutov corrector update
- Re: ATM Focal Length Checking
- From: Buck Childers <buckchil@sound.net>
- Re: ATM Focal Length Checking
- From: Buck Childers <buckchil@sound.net>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Buck Childers <buckchil@sound.net>
- ATM Subdiameter lap size for 10"
- From: Buck Childers <buckchil@sound.net>
- RE: ATM Berry equatorial
- From: Callum Potter <CallumP@selectst.com>
- Re: ATM Odd Polishing Problem
- From: carl <carl@pader-online.de>
- Re:ATM Ceravolo's Kitchen Interferometry booklet
- From: carl <carl@pader-online.de>
- Re:ATM rotating mirror/tool instead of walking around them
- From: carl <carl@pader-online.de>
- ATM SiC or Alox ??
- From: carl <carl@pader-online.de>
- ATM WARPING of ULTRA-LIGHT UPPER RING
- From: Carl Woebcke <carlw@telis.org>
- Re: ATM Getting and keeping big glass at ambient
- From: Carl Woebcke <carlw@telis.org>
- ATM Sealing plywood on dobs
- From: Carl Woebcke <carlw@telis.org>
- ATM Black paint
- From: Carl Woebcke <carlw@telis.org>
- RE: ATM Polar Alignment
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM use a camera-lens as refractor ?
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM 6" or 8" mirror
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM mounting ideas for Solar Skreen
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM DK Cass Questions II
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM: Cutting Channels in Pitch Lap
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM question on coma...
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM Filtering a non acromat
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM Clock Drive Tune-up
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM: Observing Chair
- From: Charles Broward <broward@coastal.ufl.edu>
- ATM Setting Circles
- From: Charles Broward <broward@coastal.ufl.edu>
- Re: ATM Plastic Lubricants
- From: Charles Broward <broward@coastal.ufl.edu>
- ATM Re: reducing the eyepiece height
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- ATM Re: 9" Sonotube
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM Carbide Availability
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM Carbide Availability
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- ATM The Thing!!!
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM The Thing!!!
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM The Thing!!!
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- ATM The Thing!!!
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM Eyepiece advice
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: Fw: ATM Eyepiece advice
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: Books in ATM FAQ
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM Focal Length Checking
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM Focal lgh
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM Re: OTA Geometry
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Re: ATM 10" Mirror Weight
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM Black paint
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM: Cutting Channels in Pitch Lap
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- ATM - Mirror dust and washing it off
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- Fw: ATM - Mirror dust and washing it off
- From: "Charles Hovatter" <charleshovatter@acelink.net>
- ATM focuser placement
- From: "Cho, Wilson" <wcho@microsemi.com>
- Re: ATM Electronics for Bartel Drive
- From: "Chris Westland" <westland@ust.hk>
- Re: ATM Programming NGC Sky Vector
- From: "Chris Westland" <westland@ust.hk>
- ATM Introducing Myself
- From: "Christopher Lambe" <chrislambe@tinet.ie>
- Re: ATM Dusting
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Dusting
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Newt optimization info for comment
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM To glue or not to glue...?
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Sealing plywood on dobs
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Baffling a newt - street light tests
- From: Chuck Dethloff <telmor@teleport.com>
- RE: ATM Baffling a newt - street light tests
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Accutrack Info
- From: cshaw@ghg.net (Chuck Shaw)
- ATM use a camera-lens as refractor ?
- From: claudio minutella <minutella@tic.ch>
- ATM Programming NGC Sky Vector
- From: Clint <cwhitman@gte.net>
- ATM Programming NGC Sky Vector
- From: Clint <cwhitman@gte.net>
- ATM Observing Chairs
- From: Clint <cwhitman@gte.net>
- ATM OUT OF TOWN:VACATION
- Re: ATM Mounting Ebony star
- From: Dan Brown <brownd@holmes.uchastings.edu>
- RE: ATM Foucault testing : confusion
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM Kitchen interferometry
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM threaded inserts for truss tubes- where?
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: PDF and ATM Kitchen interferometry
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM Altitude Trunions - how to make
- From: Dan Brown <brownd@holmes.uchastings.edu>
- Re: ATM Star testing/Benchmarking
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM fwd msg - ? on TDE
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM tube length
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM forwarded message about dog biscuit
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Newt optimization
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Subdiameter lap size for 10"
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM "Un-scratching" a mirror?
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Newbie Question: What do you do while mirror polishing?
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM stepper motors?
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM Stripping silver coating
- From: "Danie Malan" <DGM@it.sun.ac.za>
- RE: ATM rotating mirror/tool instead of walking around them
- From: "Danie Malan" <DGM@it.sun.ac.za>
- Re: ATM Closeup camera
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Concrete Form Tubes and Home Depot
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM which one first
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Which wood is good?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Plastic Lubricants
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Eyepiece Standards
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM "Tubular" Grinding Tools
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Eyepiece Standards
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Tube weight per foot comparison ?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Sealing plywood on dobs
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Building a spectrohelioscope
- From: Darryl Stanford <dstanfor@ccsf.cc.ca.us>
- Re: ATM rotating mirror/tool instead of walking around them
- From: Darwin Teague <darwin@indy.net>
- Re: ATM QuickCam for Astrophotography
- From: Darwin Teague <darwin@indy.net>
- Re: ATM rotating mirror/tool instead of walking around them
- From: Darwin Teague <darwin@indy.net>
- ATM lazy man's mirror making
- From: Darwin Teague <darwin@indy.net>
- ATM Don't be too quick to coat that mirror
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM help with eyepiece choice
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Star testing/Benchmarking
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM RE: True Confessions
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM 6" or 8" mirror
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM sealing a ceramic tool question
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Correcting the Hyperbola
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Compessed gas mirror cleaner
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM ceramic or porcelain or marble for a tool?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM which one first
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Minimum tools required
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Focal Length Checking
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Plate glass mirror
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Getting and keeping big glass at ambient
- From: Dave Sopchak <das@po.cwru.edu>
- ATM threaded inserts for truss tubes- where?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Truss vs. tube
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Focal Length Checking
- From: Dave Sopchak <das@po.cwru.edu>
- RE: ATM threaded inserts for truss tubes- where?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Gugolz pitch
- From: Dave Sopchak <das@po.cwru.edu>
- ATM Closeup camera
- From: "David H. Bevel" <davebevel@mindspring.com>
- ATM Jury rigged closeup camera
- From: "David H. Bevel" <davebevel@mindspring.com>
- ATM Close up camera
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Concrete Form Tubes and Home Depot
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Gregorian Plans.
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Waineo Motor torque question
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM where to start
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM newport glass and not annealed
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Sonotube base for Equatorial
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Introducing myself
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Teflon source
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM copyscope
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Introducing Myself
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Introducing Myself
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Kydex Plastic
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Mounting Ebony star
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM which one first
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM ceramic or porcelain or marble for a tool?
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM the 7mm exit pupil myth
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: Re[2]: ATM Sucking vs. Blowing
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM threaded inserts for truss tubes- where?
- From: "David H. Bevel" <davebevel@mindspring.com>
- ATM Re:
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM zoom eypieces
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Star testing/Benchmarking
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Gregorian Plans.
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Metrogon Lens is now and astrograph, sort of
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Pitching
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Which grid to start with?
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM RTV - What Brand
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM WWV Receiver
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM which one first
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Teflon source
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Cleaning
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Compessed gas mirror cleaner
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM copyscope
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM:12 inch mirror test questions
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM the 7mm exit pupil myth
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Optical Flats
- From: David Simons <ysimons@yahoo.com>
- Re: ATM Optical Flats
- From: David Simons <ysimons@yahoo.com>
- Re: ATM Optical Flats
- From: David Simons <ysimons@yahoo.com>
- Re: ATM Optical Flats
- From: David Simons <ysimons@yahoo.com>
- Re:ATM Drilling changing figure
- From: David Simons <ysimons@yahoo.com>
- Re: ATM Maksutov corrector/sticker shock
- From: David Simons <ysimons@yahoo.com>
- Fw: ATM Source for grinding polishing compounds?
- From: "David Williams" <dwilliams@comwares.net>
- ATM Introducing myself
- From: "DAWIE BOTES - STUDENT" <DAWIEB@wwg3.uovs.ac.za>
- ATM Plate glass mirror
- From: "DAWIE BOTES - STUDENT" <DAWIEB@wwg3.uovs.ac.za>
- ATM I'm going to start
- From: "DAWIE BOTES - STUDENT" <DAWIEB@wwg3.uovs.ac.za>
- ATM Gugolz pitch
- From: ketelsen@as.arizona.edu (Dean Ketelsen)
- ATM Sucking or Blowing
- From: Del Stanton <sd20@earthlink.net>
- ATM Re: Synchronous motor drive - for Europe
- From: Del Stanton <sd20@earthlink.net>
- re: ATM the 7mm exit pupil myth
- From: Derek Wong <dawong@earthlink.net>
- ATM newbie
- From: "derinkaya" <derinkaya@cs.kou.edu.tr>
- RE: ATM Berry equatorial
- ATM size of light cone at ocular
- From: Dominic-Luc Webb <dominic@enk.ks.se>
- Re: ATM Zero Backlash Drive Mechanisms
- From: Donald Clement <clement@commquest.com>
- Re: ATM Teflon source
- From: Donald Clement <clement@commquest.com>
- ATM 3D RhinoCAD
- From: Donald Clement <clement@commquest.com>
- ATM How to check if blank has internal stress?
- From: dmacrae@uconect.net (Donald MacRae)
- ATM sealing a ceramic tool question
- From: dmacrae@uconect.net (Donald MacRae)
- ATM making or buying setting circles
- From: dmacrae@uconect.net (Donald MacRae)
- ATM stepper motors?
- From: dmacrae@uconect.net (Donald MacRae)
- ATM ceramic or porcelain or marble for a tool?
- From: dmacrae@uconect.net (Donald MacRae)
- Re: ATM Zero Backlash Drive Mechanisms
- From: "dpitou" <dpitou@ix.netcom.com>
- Re: ATM Newt optimization info for comment
- From: "dpitou" <dpitou@ix.netcom.com>
- Re: ATM Newt optimization info for comment
- From: "dpitou" <dpitou@ix.netcom.com>
- Re: ATM parabolizing fast mirrors
- Re: ATM Polar Alignment
- Re: ATM Gregorian Plans.
- ATM Ball Bearing Light Source
- ATM Corrector Plate Testing, Index of Refraction
- Re: ATM Corrector Plate Testing
- Re: ATM Thanks for DK Cassegrain Advise
- Re: ATM Gear Ratios for Eq..
- Re: ATM Gear Ratios for Eq..
- Re: ATM Corrector Plate Testing
- Re: ATM which one first
- ATM Distance to point source
- ATM Collimated Telescope for Testing Optics
- Re: ATM Mounting Ebony star
- ATM Cellular Blank Fabrication
- Re: ATM Cellular Blank Fabrication
- Re: ATM Zero Backlash Drive Mechanisms
- Re: ATM Getting and keeping big glass at ambient
- Re: ATM Getting and keeping big glass at ambient
- Re: ATM: Cutting Channels in Pitch Lap
- Re: ATM Newt optimization
- ATM Ray Tracing Program
- ATM Grinding Machine Question
- Re: ATM Grinding Machine Question
- Re: An ATM Program
- Re[2]: ATM parabolizing fast mirrors
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM QuickCam for Astrophotography
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Plastic Lubricants
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Zero Backlash Drive Mechanisms
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Getting and keeping big glass at ambient
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM Foucault testing : confusion
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM "Tubular" Grinding Tools
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Computer Control help needed
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal Length Checking
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM "Tubular" Grinding Tools
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Focal Length Checking
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Dealing with McMaster-Carr
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal lgh
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Filtering a non acromat
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM: Cutting Channels in Pitch Lap
- From: Dwight Elvey <elvey@hal.com>
- ATM 220v synchronous motor
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Building a spectrohelioscope
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Crazy ED's loud and distintive laugh
- From: Ed Erbeck <Ed@crazyedoptical.com>
- ATM Waineo Motor torque question
- From: Ed Stevens <ehs@teleport.com>
- Re: ATM mounting ideas for Solar Skreen
- From: Ed Stevens <ehs@teleport.com>
- ATM parabolizing fast mirrors
- Re[2]: ATM parabolizing fast mirrors
- Re[2]: ATM parabolizing fast mirrors
- Re[2]: ATM Focal Length Checking
- Re[2]: ATM: Help Me Mount My Altitude Trunions
- RE: ATM Gregorian Plans.
- From: "Emil Johnsen" <emiljo@hl.telia.no>
- ATM Optical window
- From: "Emil Johnsen" <emiljo@hl.telia.no>
- ATM RE: Cutting Channels in Pitch Lap
- From: "Emil Johnsen" <emiljo@hl.telia.no>
- Re: ATM Gregorian Plans.
- From: Emil Johnsen <emiljo@hl.telia.no>
- ATM White Power!
- Re ATM edgepoint under Millies-Lacroix
- From: Eric Allen <ericallen@worldnet.att.net>
- Re: ATM Newt optimization
- From: Eric Marquardt <ericm@nist.gov>
- Re: ATM Building a spectrohelioscope
- From: "Ernest S. Tomlinson" <etomlins@k-online.com>
- ATM Need Help in CA
- From: "Esparza, Luis (Exchange)" <LEsparza@harman.com>
- Re: ATM threaded inserts for truss tubes- where?
- From: Fabio Pettinati <Fabio.Pettinati@vsisinc.com>
- Re: ATM Altitude Trunions - how to make
- From: Fabio Pettinati <Fabio.Pettinati@vsisinc.com>
- RE: ATM Building a spectrohelioscope
- From: "Fansler, David" <DFANSLER@autocyte.COM>
- ATM RE: 12 inch mirror test questions
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- RE: ATM figure until what wavefault?
- From: "Fields, Jonathan A." <FIELDSJ@coned.com>
- ATM In need of information
- From: "G.Ravindra Aradhya." <girish07@blr.vsnl.net.in>
- ATM Another self-built scope to view
- From: big77fan@islandnet.com (Gary Abersek)
- Re: ATM use a camera-lens as refractor ?
- From: Gary Barker <G.Barker@bristol.ac.uk>
- Re: ATM tool as a mirror?
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM mirror cell design info
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Closeup camera
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Mount for 6"
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Observing Chairs
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Star testing/Benchmarking
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Re:True Confessions & Disasters
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Floor coverings
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Dall-Kirkham Cassegrain Questions
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM 6" or 8" mirror
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Ceravolo's Kitchen Interferometry booklet
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM tube length
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM which one first
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Teflon source
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM copyscope
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM copyscope
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Rich Field Theory
- From: Gary Heiner <glheiner@pacbell.net>
- Re: Re[no]: ATM oxygen tank = mirror cleaner?
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Zero Backlash Drive Mechanisms
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Sucking vs. Blowing
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Newt optimization/cooling
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Kitchen interferometry
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Focal Length Checking
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM I'm going to start
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Kitchen interferometry
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Re: reducing the eyepiece height
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM QuickCam for Astrophotography
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM Focuser - 1.25" or 2" ??
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM which one first
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM Teflon source
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Gary Seronik <gseronik@direct.ca>
- Re: ATM Kydex Plastic
- From: Gene Horr <genehorr@swbell.net>
- ATM RTASTRO & a list of circumpolar objects for southern observers
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM Re: Clear silicon sealant.
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM Compressed air.. don't do it!!
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM Where to aluminize a mirror
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM Inclinometer question
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- RE: ATM An even crazier idea for a DEEP HACKER
- From: "George D. Nincehelser" <george@berkomusa.com>
- RE: ATM Cost of making a 8" telescope
- From: "George D. Nincehelser" <george@berkomusa.com>
- ATM rotating mirror/tool instead of walking around them
- From: Gert Jan Verhoog <gerti@xs4all.nl>
- Re: ATM tool as a mirror?
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Floor coverings
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Optical Flats
- From: Gil Stacy <gstacy@premierweb.net>
- Re: ATM Maksutov corrector/sticker shock
- From: Gil Stacy <gstacy@premierweb.net>
- ATM Pentax 5.2mm EP
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM Compessed gas mirror cleaner
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Kydex Plastic
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Kydex Plastic
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Mounting Ebony star
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Compessed gas mirror cleaner
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Compessed gas mirror cleaner
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Truss vs. tube
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Sealing plywood on dobs
- From: Greg Furtman <gfurtman@spacestar.net>
- Re: ATM Sealing plywood on dobs
- From: Greg Furtman <gfurtman@spacestar.net>
- re: ATM newport glass and not annealed
- From: Greg Granville <greg@laser.arl.psu.edu>
- Re: ATM Source for grinding polishing compounds?
- From: Greg Granville <greg@laser.arl.psu.edu>
- re:ATM:12 inch mirror test questions
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM Stabilite mirrors
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM Getting and keeping big glass at ambient
- From: Greg Granville <greg@laser.arl.psu.edu>
- ATM Kydex Plastic
- From: "Gundula Hinrichsen" <gunnie@gmx.net>
- ATM Which wood is good?
- From: "Gundula Hinrichsen" <gunnie@gmx.net>
- ATM: eractic zone in Foucault test
- From: guy_wauters@fmc.com (GUY WAUTERS)
- Re: ATM Filtering a non acromat
- From: "Harold Frohlichl" <leondf@ix.netcom.com>
- ATM Cleaning
- From: Hernan Lucas Gil Peruzzotti <Piccard@fibertel.com.ar>
- RE: RE: ATM parabolizing
- From: HERVEY LEMAY <HJL@segalco.com>
- re:ATM Don't be too quick to coat that mirror
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM zoom eypieces
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:Re[2]: ATM parabolizing fast mirrors
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM Cost of making a 8" telescope
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM Star testing/Benchmarking
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:Re: ATM Getting and keeping big glass at ambient
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:RE: Re: ATM Getting and keeping big glass at ambient
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM Center Spotting BIG Primaries
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:RE: Re: ATM Getting and keeping big glass at ambient
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM sixteen inch: bubble trouble?
- From: "Howard Banich" <Howard.Banich@nike.com>
- re:ATM parabolizing
- From: "Howard Banich" <Howard.Banich@nike.com>
- ATM Aplanetic gregorian speculation
- From: Hugues_Laroche@aia.com
- Re: ATM Bying Mirror Blanks in EU ?
- From: Hugues_Laroche@aia.com
- Re: SV: ATM Alt Bearing Size
- From: Hugues_Laroche@aia.com
- Re: ATM ceramic or porcelain or marble for a tool?
- From: Hugues_Laroche@aia.com
- Re: ATM figure until what wavefault?
- From: Hugues_Laroche@aia.com
- Re: RE[2]: ATM Foucault testing : confusion
- From: Hugues_Laroche@aia.com
- Re: ATM Optical Flats
- From: Hugues_Laroche@aia.com
- Re: ATM Focal Length Checking
- From: Hugues_Laroche@aia.com
- Re: SV: ATM: Cutting Channels in Pitch Lap
- From: Hugues_Laroche@aia.com
- ATM about dog biscuit and pitch lap channels
- From: Hugues_Laroche@aia.com
- ATM Ronchi gratings (was: Parabolizing)
- From: Hugues_Laroche@aia.com
- Re: ATM Distance to point source
- From: "Igor G. Rozivika" <igor@kuzi.sbor.spb.su>
- ATM Re: sinchronous motor
- From: "Igor G. Rozivika" <igor@kuzi.sbor.spb.su>
- Re: ATM Pads for polish oftalmics lenses in polishing mirror
- From: "ishtar66@speedline.ca" <ishtar66@speedline.ca>
- Re: ATM RE: True Confessions
- From: iss@pvtnetworks.net
- Re: ATM Metrogon Lens is now and astrograph, sort of
- From: iss@pvtnetworks.net
- Re: ATM Metrogon Lens
- From: iss@pvtnetworks.net
- Re: ATM use a camera-lens as refractor ?
- From: iss@pvtnetworks.net
- Re: ATM Metrogon Lens
- From: iss@pvtnetworks.net
- Re: ATM Source for Stepper Translation Stages?
- From: iss@pvtnetworks.net
- Re: ATM Gear Ratios for Eq..
- From: iss@pvtnetworks.net
- Re: ATM Teflon source
- From: iss@pvtnetworks.net
- re:RE: Re: ATM Getting and keeping big glass at ambient
- From: iss@pvtnetworks.net
- Re: ATM the 7mm exit pupil myth
- From: iss@pvtnetworks.net
- Re: ATM to encourage you to build larger scopes, say 10 meters for starters...
- From: iss@pvtnetworks.net
- Re: ATM Plastic Lubricants
- From: iss@pvtnetworks.net
- Re: ATM Regrind this doublet??
- From: iss@pvtnetworks.net
- Re: ATM Advice on Drilling Glass
- From: iss@pvtnetworks.net
- Re: ATM: Cutting Channels in Pitch Lap
- From: iss@pvtnetworks.net
- Re: ATM: Cutting Channels in Pitch Lap
- From: iss@pvtnetworks.net
- Re: ATM Re: Synchronous motor drive - for Europe
- From: iss@pvtnetworks.net
- Re: An ATM Program
- From: iss@pvtnetworks.net
- Re: ATM Clock Drive Tune-up
- From: iss@pvtnetworks.net
- Re: ATM use a camera-lens as refractor ?
- From: "J. Christopher Westland" <westland@ust.hk>
- Re: ATM Optical Flats
- From: "J. Christopher Westland" <westland@ust.hk>
- Re: ATM Crazy Ed email
- From: "Jack Brindle" <jackb@ricochet.net>
- Re: ATM Surplus small "tilt and pan" stepper drive
- From: "Jack Brindle" <jackb@ricochet.net>
- Re: ATM WWV Receiver
- From: "Jack Brindle" <jackb@ricochet.net>
- ATM Closeup camera
- From: Jack Schmidling <arf@mc.net>
- ATM Polishing Pads
- From: Jack Schmidling <arf@mc.net>
- ATM Polar Alignment
- From: Jack Schmidling <arf@mc.net>
- ATM Metrogon Lens is now and astrograph, sort of
- From: Jack Schmidling <arf@mc.net>
- ATM Metrogon Lens
- From: Jack Schmidling <arf@mc.net>
- ATM Optical Window
- From: Jack Schmidling <arf@mc.net>
- Re: ATM Focuser - 1.25" or 2" ??
- From: "James E. Gort" <gort@sonetis.com>
- Re: ATM Focuser - 1.25" or 2" ??
- From: "James E. Gort" <gort@sonetis.com>
- ATM Carbide Availability
- From: "James L. Marino" <jmar1371@vornet.com>
- ATM Carbide Availability
- From: "James L. Marino" <jmar1371@vornet.com>
- ATM Thank you to all
- From: "James L. Marino" <jmar1371@vornet.com>
- ATM Re: Teflon source
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- ATM sagging glass myth
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- Re:ATM Dusting
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- ATM Re: Optical flats
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- ATM Mirror cleaning/Collodion
- From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
- ATM Hee, hee, Banerjee.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Corrector Plate Testing
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM CAUSTIC CURVE PROGRAM
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Caustic test data reduction.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM DK Cass Questions II
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Distance to point source
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM:12 inch mirror test questions
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Focal Length Checking
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM parabolizing
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Figuring Help Needed
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM homemade finder
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Corrector Plate Testing, Index of Refraction
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Aplanetic gregorian speculation
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM RTV - What Brand
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Teflon source
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Regrind this doublet??
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM Filtering a non acromat
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- Re: ATM White Power!
- From: "Jean-Marc.Becker" <Jean-Marc.Becker@wanadoo.fr>
- ATM Mirror refiguring services
- From: Jeff <jeffr@phonetech.com>
- ATM: cutting 24" disk from 1/2" plate
- From: "Jeff Baldwin" <bald@gotnet.net>
- Re: ATM Mount for 6"
- From: jeff.martin@ccmail.wpcorp.com.au
- Re: ATM Mount for 6"
- From: jeff.martin@ccmail.wpcorp.com.au
- Re: ATM forwarded message on Subject: Focuser to Mirror dist
- From: jeff.martin@ccmail.wpcorp.com.au
- ATM Mirror Coating Time
- From: jeff.martin@ccmail.wpcorp.com.au
- Re[2]: ATM Sucking vs. Blowing
- From: jeff.martin@ccmail.wpcorp.com.au
- Re[2]: ATM Sucking vs. Blowing
- From: jeff.martin@ccmail.wpcorp.com.au
- Re[2]: ATM Eyepiece Standards
- From: jeff.martin@ccmail.wpcorp.com.au
- Re: ATM Focal Length Checking
- From: jeff.martin@ccmail.wpcorp.com.au
- Re: ATM Focal Length Checking
- From: jeff.martin@ccmail.wpcorp.com.au
- ATM Test posting
- From: Jerry Rhodes <jlrhod@bright.net>
- ATM used equip
- From: Jerry Rhodes <jlrhod@bright.net>
- ATM Focal lgh
- From: Jerry Rhodes <jlrhod@bright.net>
- ATM Crazy Ed
- From: Jim Cooper <jim@jlcooper.com>
- ATM Crazy Ed email
- From: Jim Cooper <jim@jlcooper.com>
- ATM Re: 9" Sonotube
- From: Jim Cooper <jim@jlcooper.com>
- ATM Re: Opticast
- From: Jim Cooper <jim@jlcooper.com>
- ATM Re: 8" f/6 with 9" ID tube... advice and source?
- From: "Jim Fly" <flyj@integrityonline12.com>
- ATM Re: 8" f/6 with 9" ID tube... advice and source?
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM Re: 8" f/6 with 9" ID tube... advice and source?
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: Felt/Velvet (was ATM Newt optimization)
- From: "Jim Fly" <flyj@integrityonline12.com>
- ATM Center Spotting BIG Primaries
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM threaded inserts for truss tubes- where?
- From: "Jim Fly" <flyj@integrityonline12.com>
- ATM Advice on Drilling Glass
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM Dealing with McMaster-Carr
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM Printing from Ronchi.exe
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM Dealing with McMaster-Carr
- From: "Jim Fly" <flyj@integrityonline12.com>
- Fw: ATM Dealing with McMaster-Carr
- From: "Jim Fly" <flyj@integrityonline12.com>
- Re: ATM where to start
- From: Jim Girard <argo@teleport.com>
- Re: ATM Thanks to everyone (Re. Where to start)
- From: Jim Girard <argo@teleport.com>
- Re: ATM sealing a ceramic tool question
- From: Jim Girard <argo@teleport.com>
- ATM Crazy ED's loud and distintive laugh
- From: Jim Hodgers <alfiesty@chaffee.net>
- Re: ATM Zero Backlash Drive Mechanisms
- From: Jim Simpson <jsimpson@cais.com>
- ATM Re: SV: changing speed of snychronous motors
- From: Jim Simpson <jsimpson@cais.com>
- ATM Focuser - 1.25" or 2" ??
- From: Jmkasunich@ra.rockwell.com
- Re: ATM Compessed gas mirror cleaner
- From: Jmkasunich@ra.rockwell.com
- ATM Altitude Trunions - how to make
- From: Jmkasunich@ra.rockwell.com
- Re: ATM Center Spotting BIG Primaries
- From: Joe Castoro <astrojoe@erols.com>
- Re: ATM Accutrack Info
- From: Joe Castoro <astrojoe@erols.com>
- Re: ATM threaded inserts for truss tubes- where?
- From: Joe Castoro <astrojoe@erols.com>
- Re: ATM threaded inserts for truss tubes- where?
- From: Joe Castoro <astrojoe@erols.com>
- Re: ATM Drilling changing figure
- From: Joe Castoro <astrojoe@erols.com>
- Re: ATM mirror cell design info
- From: "Johan Vanbeselaere" <jvb@digilife.be>
- Re: ATM Can you help me?
- From: "Johan Vanbeselaere" <jvb@digilife.be>
- Re: ATM parabolizing fast mirrors
- From: "Johan Vanbeselaere" <jvb@digilife.be>
- Re: ATM Yet another mirror testing method
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Can you help me?
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: PDF and ATM Kitchen interferometry
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: PDF and ATM Kitchen interferometry
- From: Johan Vanbeselaere <jvb@digilife.be>
- ATM Oxygen
- From: John Akers <jakers@cyllene.uwa.edu.au>
- Re: ATM making or buying setting circles
- From: John Garland <jgarland@morgan.ucs.mun.ca>
- Re: ATM Foam board
- From: "Johnny Boy" <yo_john@hotmail.com>
- ATM RE: 9" Sonotube (8-1/2")
- From: "Johnny Boy" <yo_john@hotmail.com>
- ATM RE: Used Equip./Mirrors
- From: "Johnny Boy" <yo_john@hotmail.com>
- ATM Source for Teflon strips...
- From: "Johnny Boy" <yo_john@hotmail.com>
- Re: Books in ATM FAQ
- From: "Johnny Boy" <yo_john@hotmail.com>
- ATM My wittle home page...
- From: "Johnny Boy" <yo_john@hotmail.com>
- RE: RE: ATM My wittle home page...
- From: "Johnny Boy" <yo_john@hotmail.com>
- ATM RE: website, Ross Workman, 8" f/6
- From: "Johnny Boy" <yo_john@hotmail.com>
- Verification of Your WWW Request <ref 98260647>
- From: "Joke of the Day" <null@joker.org>
- RE: ATM 6" or 8" mirror
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM Mat pitch lap
- From: "Jon B. Cooper" <jbcooper@gte.net>
- ATM Alt Bearing Size
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM making or buying setting circles
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM threaded inserts for truss tubes- where?
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM threaded inserts for truss tubes- where?
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM threaded inserts for truss tubes- where?
- From: "Jon B. Cooper" <jbcooper@gte.net>
- Re: ATM: cutting 24" disk from 1/2" plate
- From: Jon Cooper <jbcooper@gte.net>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Jon Cooper <jbcooper@gte.net>
- Re: ATM Dealing with McMaster-Carr
- From: Jon Cooper <jbcooper@gte.net>
- Re: ATM: Help Me Mount My Altitude Trunions
- From: Jon Cooper <jbcooper@gte.net>
- Re: ATM Mirror cleaning/Collodion
- From: Jon Cooper <jbcooper@gte.net>
- RE: ATM An even crazier idea for a DEEP HACKER
- From: Jon Peterson <jon@osisoft.com>
- Re: ATM Truss vs. tube
- From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
- Re: ATM To glue or not to glue...?
- From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
- Re: ATM Gear Ratios for Eq..
- From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
- Re: ATM Crazy Ed
- From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
- Re: ATM tube length
- From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
- Re: ATM copyscope
- From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
- Re: ATM Mounting Ebony star
- From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
- Re: ATM Mounting Ebony star
- From: Jonathan Shrier <conecon@riyadh-emh1.army.mil>
- ATM Giant WW2 Germ. Battleship Binos
- From: "Joseph B. Goins" <jgoins@cedex.com>
- ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Keith Wichman <kwichman@draper.com>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Keith Wichman <kwichman@draper.com>
- ATM: Help... 8" f/6.3 design evolution advise.
- From: Keith Wichman <kwichman@draper.com>
- ATM: Help Me Mount My Altitude Trunions
- From: Keith Wichman <kwichman@draper.com>
- RE: ATM Observing Chairs
- From: "Ken Carter" <kencar@kencar.simplenet.com>
- RE: ATM Can you help me?
- From: "Ken Carter" <kencar@kencar.simplenet.com>
- RE: ATM 20" mirror
- From: "Ken Carter" <kencar@kencar.simplenet.com>
- Re: ATM edgepoint under Milles-Lacroix, what to do?
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM edgepoint under Milles-Lacroix, what to do?
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: Re[2]: ATM parabolizing fast mirrors
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM RE: True Confessions
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM compatibility Foucault tester / TEX-program?
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM where to start
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Thanks to everyone (Re. Where to start)
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Odd Polishing Problem
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Source for grinding polishing compounds?
- From: Ken Lowther <s0109366@cc.ysu.edu>
- Re: ATM Re: atm-digest V1 #1186
- From: Ken Lowther <s0109366@cc.ysu.edu>
- ATM Figuring Help Needed
- From: "Kjellquist, David T" <david.t.kjellquist@lmco.com>
- Re: ATM figure until what wavefault?
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- Re: ATM Getting and keeping big glass at ambient
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- ATM Microfaceting/texturing a pitch lap
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- RE: ATM: Cutting Channels in Pitch Lap
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- ATM Sixteen inch - lessons learned
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- ATM sixteen inch: bubble trouble?
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- ATM Baffling a newt - street light tests
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- Re: ATM about dog biscuit and pitch lap channels
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- Re: ATM parabolizing
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- RE: ATM Baffling a newt - street light tests
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- RE: ATM parabolizing
- From: Krajci Tom Det5 57 Wg <Tom.Krajci@barksdale.af.mil>
- Re: ATM Sucking vs. Blowing (SOLUTION)
- From: Kreig McBride <kmcbride@memes.com>
- Re: ATM Maksutov corrector/sticker shock
- From: Kreig McBride <kmcbride@memes.com>
- Re: ATM Cost of making a 8" telescope
- From: kwichman@draper.com
- Re: ATM WWV Receiver
- From: Kyle Barger <kbarger@navpoint.com>
- Re: ATM which one first
- From: Kyle Barger <kbarger@navpoint.com>
- ATM Bellstar telescopes
- From: Kyle Barger <kbarger@navpoint.com>
- Re: ATM rotating mirror/tool instead of walking around them
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM rotating mirror/tool instead of walking around them
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Mounting Ebony star
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Dusting
- From: Larry Manuel <lmanuel@sprint.ca>
- ATM Review of TM cost - 6 inch f/8 Newtonian [long]
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Zero Backlash Drive Mechanisms
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM the 7mm exit pupil myth
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Getting and keeping big glass at ambient
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Sucking vs. Blowing
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Getting and keeping big glass at ambient
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Getting and keeping big glass at ambient
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Refractor Tube: is This Reasonable?
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM Sucking or Blowing
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM To glue or not to glue...?
- From: Larry Manuel <lmanuel@sprint.ca>
- Re: ATM resistance of heater
- From: Larry Manuel <lmanuel@sprint.ca>
- ATM mirror cell design info
- From: lewis@eecg.toronto.edu
- ATM sticky fingers - wrong URL
- From: lewis@eecg.toronto.edu
- ATM QuickCam for Astrophotography
- From: "Lloyd Verhage" <verhage@humec.ksu.edu>
- ATM Vacuum on mirror
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- No Subject
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- Re: ATM Compessed gas mirror cleaner
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- No Subject
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- ATM CFC's again...still
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- No Subject
- From: "Lowell Dodson" <LDDodson@worldnet.att.net>
- ATM homemade finder
- From: "Luis Hontoria Hernández" <HONTORIA@santandersupernet.com>
- ATM copyscope
- From: "Luis Hontoria Hernández" <HONTORIA@santandersupernet.com>
- RE: ATM Observing Chairs
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM: Help Me Mount My Altitude Trunions
- From: Malcolm Macdonald <toliman@wave.co.nz>
- ATM Tube weight per foot comparison ?
- From: malsing@borg.ae.usr.com
- Re: ATM Sucking vs. Blowing
- From: malsing@borg.ae.usr.com
- Re: ATM Sucking vs. Blowing (SOLUTION)
- From: malsing@borg.ae.usr.com
- Re: ATM Tube weight per foot comparison ?
- From: malsing@borg.ae.usr.com
- Re: Felt/Velvet (was ATM Newt optimization)
- From: malsing@borg.ae.usr.com
- Re: ATM Center Spotting BIG Primaries
- From: malsing@borg.ae.usr.com
- Re: An ATM Program
- From: malsing@borg.ae.usr.com
- Re: An ATM Program
- From: malsing@borg.ae.usr.com
- ATM question on coma...
- From: "Marc Mandel" <mmandel@usd.edu>
- Re: ATM Sizing program available.
- From: marc mandel <mmandel@usd.edu>
- Re: ATM re: opticast usa
- From: Marc Mandel <mmandel@usd.edu>
- ATM problem with exact place of focuser
- From: "Marc van Gestel" <van.gestel@tip.nl>
- ATM edgepoint under Milles-Lacroix, what to do?
- From: "Marc van Gestel" <van.gestel@tip.nl>
- Re: ATM edgepoint under Milles-Lacroix, what to do?
- From: "Marc van Gestel" <van.gestel@tip.nl>
- ATM compatibility Foucault tester / TEX-program?
- From: "Marc van Gestel" <van.gestel@tip.nl>
- ATM figure until what wavefault?
- From: "Marc van Gestel" <van.gestel@tip.nl>
- ATM extra focus travel?
- From: "Marc van Gestel" <van.gestel@tip.nl>
- ATM flip mirror building plans
- From: Marc van Leeuwen <Marc.van.leeuwen@solcon.nl>
- ATM wire spider info
- From: Marc van Leeuwen <Marc.van.leeuwen@solcon.nl>
- Re: ATM EeeAAAHHHHRRRGGGHHH!
- From: Marinus Lugt <Marinus.Lugt@dss.dornier.dasa.de>
- Re: ATM Re: Focuser Baffling
- From: Marinus van der Lugt <marinus.lugt@dss.dornier.dasa.de>
- Re: ATM Focuser baffling
- From: Marinus van der Lugt <marinus.lugt@dss.dornier.dasa.de>
- Re: ATM Focuser baffling
- From: Marinus van der Lugt <marinus.lugt@dss.dornier.dasa.de>
- Re: ATM 6" or 8" mirror
- From: Marinus van der Lugt <marinus.lugt@dss.dornier.dasa.de>
- Re: ATM Focuser - 1.25" or 2" ??
- From: Marinus van der Lugt <marinus.lugt@dss.dornier.dasa.de>
- Re: ATM:12 inch mirror test questions
- From: mark cowan <cowanm@open.org>
- Re: ATM lazy man's mirror making
- From: mark cowan <cowanm@open.org>
- Re: ATM Thanks for response to 12 inch mirror test questions
- From: mark cowan <cowanm@open.org>
- Re: ATM Optical Flats
- From: mark cowan <cowanm@open.org>
- Re: SV: ATM: Cutting Channels in Pitch Lap
- From: mark cowan <cowanm@open.org>
- Re: ATM Focal Length Checking
- From: mark cowan <cowanm@open.org>
- Re: ATM Closeup camera
- From: "Mark E Nurczyk" <mnurczyk@mwt.net>
- ATM Nine point cell plans
- From: "Mark E. Thomas" <met2@ptd.net>
- ATM resistance of heater
- From: Mark Slade <mslade@erols.com>
- Re: ATM resistance of heater
- From: Mark Slade <mslade@erols.com>
- Re: ATM resistance of heater
- From: Mark Slade <mslade@erols.com>
- Re: ATM use a camera-lens as refractor ?
- From: "Mark VandeWettering" <markv@pixar.com>
- ATM homemade crayfords
- From: bj712@scn.org (Mark Zemanek)
- ATM re: opticast usa
- From: bj712@scn.org (Mark Zemanek)
- ATM Crazy Ed
- From: mark.kaye@sympatico.ca
- RE: ATM Eyepiece Standards
- From: "Mathew Marulla" <atm@tiac.net>
- RE: ATM Giant WW2 Germ. Battleship Binos
- From: "Mathew Marulla" <atm@tiac.net>
- RE: ATM Building a spectrohelioscope
- From: "Mathew Marulla" <atm@tiac.net>
- ATM Re: 9" Sonotube
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM Re: Crazy Ed
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- Re: ATM Black Paint
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- ATM Help w/ Older Meade Clock Drive
- From: Matt & Belinda Tarlach <tarlach@earthlink.net>
- Re: ATM tool as a mirror?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Programming NGC Sky Vector
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re: reducing the eyepiece height
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Ronchi Test Question
- From: Mel Bartels <mbartels@efn.org>
- ATM netiquette post from the list owner
- From: Mel Bartels <mbartels@efn.org>
- ATM Re: WARPING of ULTRA-LIGHT UPPER RING
- From: Mel Bartels <mbartels@efn.org>
- ATM fwd msg - ? on TDE
- From: Mel Bartels <mbartels@efn.org>
- ATM forwarded message on Subject: Focuser to Mirror distance formula
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM atm ground- to deep
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Which grid to start with?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Gear Ratios for Eq..
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Focuser - 1.25" or 2" ??
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Compessed gas mirror cleaner
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Compessed gas mirror cleaner
- From: Mel Bartels <mbartels@efn.org>
- ATM fwd ? on mirror tests
- From: Mel Bartels <mbartels@efn.org>
- ATM to encourage you to build larger scopes, say 10 meters for starters...
- From: Mel Bartels <mbartels@efn.org>
- ATM the 7mm exit pupil myth
- From: Mel Bartels <mbartels@efn.org>
- ATM Atlanta area and Dallas area amateurs
- From: Mel Bartels <mbartels@efn.org>
- ATM msg from list owner
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM the 7mm exit pupil myth
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Cellular Blank Fabrication
- From: Mel Bartels <mbartels@efn.org>
- ATM fwd msg on Stabilite mirrors
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: compustar schematics]
- From: Mel Bartels <mbartels@efn.org>
- ATM forwarded message about dog biscuit
- From: Mel Bartels <mbartels@efn.org>
- ATM forwarded message on refractor tube - blackening the interior
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Printing from Ronchi.exe
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Baffling a newt - street light tests
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Ronchi gratings (was: Parabolizing)
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Black Paint
- From: michael@zae.uni-wuerzburg.de
- Re: ATM Closeup camera
- From: Michael Bradshaw <mbradsha@shrike.depaul.edu>
- Re: An ATM Program
- From: Michael Bradshaw <mbradsha@shrike.depaul.edu>
- Re: ATM: eractic zone in Foucault test
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM: eractic zone in Foucault test
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Gregorian Plans.
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Re: 8" f/6 with 9" ID tube... advice and source?
- From: "Michael J. Coslo" <mjc5@psu.edu>
- ATM Answer to the Odd Polishing Problem
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Sonotube base for Equatorial
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Compound plate-glass mirrors
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Mounting Ebony star
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Which Wood Would you use?
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM oxygen tank = mirror cleaner?
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Plastic Lubricants
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Reply - Stabilite mirror opinions
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Buy this Glass??
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM: Cutting Channels in Pitch Lap
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM Black paint
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re: ATM sixteen inch: bubble trouble?
- From: "Michael J. Coslo" <mjc5@psu.edu>
- Re:ATM Black Paint
- From: Michael Meister <michael@zae.uni-wuerzburg.de>
- Re: ATM Berry equatorial
- From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
- Re: ATM Aplanetic gregorian speculation
- From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
- ATM Ray Tracing Software
- From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
- Re: ATM QuickCam for Astrophotography
- From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
- Re: ATM Diamond lapping Compounds (was: Source for ..)
- From: "Michael P Lindner" <mpl@wnmail.wndev.att.com>
- Re: ATM Foucault testing : confusion
- From: Michael P Lindner <mikel@worldnet.att.net>
- Re: ATM RE: Caustic Program and all conics caustic formula
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM Re: Teflon source
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- ATM focus animation
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM Newbie Question
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM Foucault testing : confusion
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM Printing from Ronchi.exe
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM Maksutov corrector update
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM parabolizing
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM re: opticast usa
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- ATM System of Even Wear?
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- ATM Lurie-Houghton
- From: "Michael P. Lindner" <mikel@worldnet.att.net>
- Re: ATM mirror cell design info
- From: papilio1@juno.com (Michael Pankratz)
- ATM porthole glass
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Compessed gas mirror cleaner
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Getting and keeping big glass at ambient
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM Kitchen interferometry
- From: papilio1@juno.com (Michael Pankratz)
- Re: ATM parabolizing fast mirrors
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Gregorian Plans.
- From: Michael Peck <mpeck1@ix.netcom.com>
- RE: ATM Gregorian Plans.
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Dall-Kirkham Cassegrain Questions
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Thanks for DK Cassegrain Advise
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Sonotube base for Equatorial
- From: Michael Robinson <thomrob@mail.hot1.net>
- ATM Ronchi Screens
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM sixteen inch: bubble trouble?
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Sealing plywood on dobs
- From: Mike <mfleenor@icx.net>
- Re: ATM To glue or not to glue...?
- From: Mike <mfleenor@icx.net>
- Re: ATM 6" or 8" mirror
- From: Mike Burdo <mburdoo@azstarnet.com>
- ATM Odd Polishing Problem
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM RE: True Confessions
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Thanks to everyone (Re. Where to start)
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Altitude Trunions - how to make
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM Altitude Trunions - how to make
- From: "Mike Marchand" <marchanm@kent.net>
- Re: ATM Gregorian Plans.
- From: Nancy_D'Antuono@brown.edu
- ATM Portable Power Station
- From: Ned Smith <SMITHN00@dcor.state.ga.us>
- ATM Eyepiece advice
- From: Ned Smith <SMITHN00@dcor.state.ga.us>
- ATM "NEWT" software
- From: Ned Smith <SMITHN00@dcor.state.ga.us>
- ATM 10" Mirror Weight
- From: Ned Smith <SMITHN00@dcor.state.ga.us>
- SV: ATM RE: Help me design my 8" f/6.3 dob
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- ATM Re: Focuser Baffling
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Questions on 8" f/5 design
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM problem with exact place of focuser
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Pitching
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Alt Bearing Size
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Rich Field Theory
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM the 7mm exit pupil myth
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM the 7mm exit pupil myth
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM the 7mm exit pupil myth-a note on drawtube diameters
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM the 7mm exit pupil myth-roll out the barrel
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM Sucking vs. Blowing
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM Newt optimization
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM I'm going to start
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- SV: ATM: Cutting Channels in Pitch Lap
- From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
- Re: ATM homemade finder
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- ATM help with eyepiece choice
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- Re: ATM Bying Mirror Blanks in EU ?
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- ATM Thanks for the help with eyepiece
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- ATM a bit of philosophy
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- Re: ATM The Thing!!!
- From: nfaria@raff.fe.up.pt (Nuno Faria)
- ATM Mounting Ebony star
- From: Patricia Malone <pmalone@nwlink.com>
- ATM Ebony star on bearings
- From: Patricia Malone <pmalone@nwlink.com>
- Re: ATM Ray Tracing Software
- From: Pedro <pbraganc@mustang.uwo.ca>
- ATM IRT-Ray Tracing
- From: Pedro <pbraganc@mustang.uwo.ca>
- ATM Surplus small "tilt and pan" stepper drive
- From: pete.koziar@baltsun.com
- Re: ATM Source for Stepper Translation Stages?
- From: pete.koziar@baltsun.com
- ATM QuickCam for Astrophotography
- From: pete.koziar@baltsun.com
- ATM Diamond lapping Compounds (was: Source for ..)
- From: pete.koziar@baltsun.com
- ATM copyscope
- From: pete.koziar@baltsun.com
- Re: ATM Zero Backlash Drive Mechanisms
- From: Peter <kitgears@kitgear.com>
- Re: PDF and ATM Kitchen interferometry
- From: Peter <kitgears@kitgear.com>
- Re: ATM Can you help me?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Concrete Form Tubes and Home Depot
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Gregorian Plans.
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM RE: True Confessions
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Source for Stepper Translation Stages?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM flip mirror building plans
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Teflon source
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM to encourage you to build larger scopes, say 10 meters for starters...
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Which Wood Would you use?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM oxygen tank = mirror cleaner?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM homemade crayfords
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Dusting
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM EeeAAAHHHHRRRGGGHHH!
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Carbide Availability
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Carbide Availability
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Optical Flats
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Optical Flats
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Foucault testing : confusion
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Sucking vs. Blowing
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Sucking vs. Blowing
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Sucking vs. Blowing
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM forwarded message about dog biscuit
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Dealing with McMaster-Carr
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM Maksutov corrector/sticker shock
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Maksutov corrector/sticker shock
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Maksutov corrector/sticker shock
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Altitude Trunions - how to make
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM Maksutov corrector update
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Maksutov corrector update
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM Re: Grinding Machine
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Re: Grinding Machine
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Grinding Machine Question
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Filtering a non acromat
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Grinding Machine
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Compound plate-glass mirrors
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Advice on Drilling Glass
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Maksutov corrector update
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM First Light, for an Eyepiece that is....
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Closeup camera
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: Re[2]: ATM parabolizing fast mirrors
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: Re[2]: ATM parabolizing fast mirrors
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Metrogon Lens is now and astrograph, sort of
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Corrector Plate Testing, Index of Refraction
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM AWOL
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Correcting the Hyperbola
- From: Phil Marcus <rocket-science@worldnet.att.net>
- ATM Re: atm-digest V1 #1186
- From: Phil Marcus <rocket-science@worldnet.att.net>
- ATM Gear Drives
- Re: ATM Cost of making a 8" telescope
- Re: ATM mounting ideas for Solar Skreen
- Re: ATM mounting ideas for Solar Skreen
- ATM Rocky Mountain Star Stare
- ATM Just another scope
- ATM Plastic Lubricants
- Re: ATM Just another scope
- ATM Buy this Glass??
- From: PK6811S@ACAD.DRAKE.EDU
- ATM Regrind this doublet??
- From: PK6811S@ACAD.DRAKE.EDU
- ATM Where are the inexpensive mirrors?
- From: "Rafael Ramirez" <globalimages@arrakis.es>
- Re: ATM use a camera-lens as refractor ?
- ATM Metrogon Filter Source
- Re: ATM use a camera-lens as refractor ?
- Re: ATM tube length
- Re: ATM Source for Stepper Translation Stages?
- Re: ATM used equip
- Re: ATM which one first
- Re: ATM Gear reduction
- Re: ATM Teflon source
- Re: ATM Focuser Design (was: which one first)
- Re: ATM Zero Backlash Drive Mechanisms
- Re: ATM Optical Flats
- ATM Refractor Tube: is This Reasonable?
- ATM Pier Pressure
- ATM RA/Dec Housings from Pipe & Fittings??
- Re: ATM: Help Me Mount My Altitude Trunions
- Re: ATM Dealing with McMaster-Carr
- ATM "Un-scratching" a mirror?
- RE: ATM 20" mirror
- Re: ATM resistance of heater
- Re: Re[no]: ATM oxygen tank = mirror cleaner?
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- Re: ATM Dusting
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- Re: ATM Eyepiece Standards
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- Re: ATM Sucking vs. Blowing
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- Re: ATM Eyepiece Standards
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- ATM Fw: Dod problems
- From: "Randy J. Rogers" <stardot@worldnet.att.net>
- ATM Best TM Books/Kits/Parts, etc.
- From: Ray Mutzel - The PC Doc <rcmutzel@desupernet.net>
- ATM Stabilite mirrors
- From: dosc@cswnet.com (Raymond A. Desmarais Jr.)
- ATM Reply to Mr. Ric Rokosz on his Stabilite mirror opinions
- From: dosc@cswnet.com (Raymond A. Desmarais Jr.)
- Re: ATM Reply - Stabilite mirror opinions
- From: dosc@cswnet.com (RAYMOND A. DESMARAIS Jr.)
- ATM Reply Stabilite
- From: dosc@cswnet.com (Raymond A. Desmarais Jr.)
- ATM WWV Receiver
- From: Rex Klopfenstein Jr <rklopfen@wcnet.org>
- Re: ATM Stabilite mirrors
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Reply - Stabilite mirror opinions
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Reply - Stabilite mirror opinions
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Stabilite mirrors
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Getting and keeping big glass at ambient
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Getting and keeping big glass at ambient
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- ATM Geared Steppers at Apogee
- From: Ricardo Dunna <rdunna@rionet.com.br>
- Re: ATM CAUSTIC CURVE PROGRAM
- From: Ricardo Dunna <rdunna@rionet.com.br>
- Re: ATM QuickCam for Astrophotography
- From: Ricardo Dunna <rdunna@rionet.com.br>
- Re: ATM "Tubular" Grinding Tools
- From: Ricardo Dunna <rdunna@rionet.com.br>
- Re: ATM To glue or not to glue...?
- From: "Richard Keppler" <rkeppler@telusplanet.net>
- ATM An even crazier idea for a DEEP HACKER
- From: Richard Schwartz <richas@idt.net>
- ATM Parabolizing Fast Mirrors
- From: Richard Schwartz <richas@idt.net>
- ATM Zero Backlash Drive Mechanisms
- From: Richard Schwartz <richas@idt.net>
- ATM Sucking vs. Blowing
- From: Richard Schwartz <richas@idt.net>
- ATM White Power!
- From: Richard Schwartz <richas@idt.net>
- ATM New Kind of Flotation Cells
- From: Richard Schwartz <richas@idt.net>
- Re: ATM which one first
- From: Robert Beer <r-beer@onu.edu>
- Re: ATM help with eyepiece choice
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM where to start
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM where to start
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM which one first
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM focuser placement
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM Teflon source
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM which one first
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM Foucault testing : confusion
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM Optical window
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM oxygen tank = mirror cleaner?
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM lazy man's mirror making
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM Carbide Availability
- From: Robert Duvall <rduvall@jlc.net>
- Re: ATM extra focus travel?
- From: Robert Duvall <rduvall@jlc.net>
- ATM Free plans for 4inch dob - new web page
- From: Robert Haler <rhaler@lymax.com>
- Re: ATM Ceravolo's Kitchen Interferometry booklet
- From: Robert Haler <rhaler@lymax.com>
- Re: PDF and ATM Kitchen interferometry
- From: Robert Haler <rhaler@lymax.com>
- ATM Re: atm-digest V1 #1210
- From: "Robert Midiri" <Robert.Midiri@mail.tju.edu>
- ATM How do I figure mirror to focuser length?
- From: Robert Perkins <weston1967@earthlink.net>
- Re: ATM How do I figure mirror to focuser length?
- From: Robert Perkins <weston1967@earthlink.net>
- Re: ATM Figuring Help
- From: Rod Brackenridge <rjb@netconnect.com.au>
- ATM:12 inch mirror test questions
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM Thanks for response to 12 inch mirror test questions
- From: Rod Brackenridge <rjb@netconnect.com.au>
- ATM Thanks for response to 12 inch mirror test questions
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM Best TM Books/Kits/Parts, etc.
- From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
- Re: ATM tube length
- From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
- Re: ATM forwarded message about dog biscuit
- From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
- ATM Re: atm-digest V1 #1210
- From: "Roger Davis" <batsc@netspace.net.au>
- ATM To glue or not to glue...?
- From: Ronald Newman <ronaldn@ptd.net>
- ATM Figuring Help
- From: Ross_Dawson@county.com.au
- Re: ATM Can you help me?
- From: Ross_Dawson@county.com.au
- Re: Re[2]: ATM Sucking vs. Blowing
- From: Ross_Dawson@county.com.au
- Re: ATM Teflon source
- From: r.obertrifter@t-online.de (rudolf obertrifter)
- Re: ATM Teflon source
- From: r.obertrifter@t-online.de (rudolf obertrifter)
- RE: ATM Gear Ratios for Eq..
- From: Rue Mark <Mark.Rue@columbia.net>
- ATM Berry equatorial
- From: rutherfordt@ten-nash.ten.k12.tn.us
- ATM Gregorian Plans.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Gregorian Plans. - VERY LARGE DC supplies. - Bunch-O-Questions.
- From: "Sam Michael" <samm@idcomm.com>
- ATM RE: True Confessions
- From: "Sam Michael" <samm@idcomm.com>
- ATM Sizing program available.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Ray Tracing Software
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Source for grinding polishing compounds?
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Source for grinding polishing compounds?
- From: "Sam Michael" <samm@idcomm.com>
- ATM Salem's site is not up yet.
- From: "Sam Michael" <samm@idcomm.com>
- ATM Field of View Diameter.
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM to encourage you to build larger scopes, say 10 meters for starters...
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM ceramic or porcelain or marble for a tool?
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Zero Backlash Drive Mechanisms
- From: "Sam Michael" <samm@idcomm.com>
- ATM EeeAAAHHHHRRRGGGHHH!
- From: "Sam Michael" <samm@idcomm.com>
- RE: Re: ATM Getting and keeping big glass at ambient
- From: "Sam Michael" <samm@idcomm.com>
- ATM Pads for polish oftalmics lenses in polishing mirror
- From: "Sandro" <sandroac@pr.gov.br>
- ATM mounting ideas for Solar Skreen
- Re: ATM: Help Me Mount My Altitude Trunions
- ATM telescope control
- From: bc820@scn.org (SCN User)
- ATM setting circles made from paper
- From: SCN User <er-chan@scn.org>
- RE: ATM Gregorian Plans.
- From: "Scordato, Thomas" <TSCORDA@alleghenypower.com>
- RE: ATM Re: Deep Impac - Hollywood %$#%^
- From: "Scordato, Thomas" <TSCORDA@alleghenypower.com>
- ATM refractors
- From: Scott Berfield <berfield@pacbell.net>
- ATM call for atm software
- From: Scott Berfield <berfield@pacbell.net>
- Re: ATM Stabilite mirrors
- From: "Scott Cooke" <scottc@sprintmail.com>
- Re: re:RE: Re: ATM Getting and keeping big glass at ambient
- From: "Scott Cooke" <scottc@sprintmail.com>
- Re: ATM Getting and keeping big glass at ambient
- From: Scott Milligan <starzkey@ma.ultranet.com>
- Re: ATM forwarded message about dog biscuit
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Altitude Trunions - how to make
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Black paint
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Another Baffling question
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM My lap won't cut
- From: SHAILESH DALVI <sahil@bom3.vsnl.net.in>
- ATM Re:
- From: SHAILESH DALVI <sahil@bom3.vsnl.net.in>
- ATM CAUSTIC CURVE PROGRAM
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Caustic Program: Ellipses and Hyperbolas
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Caustic Program and all conics caustic formula
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Which Wood Would you use?
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Caustic Formula Correction!
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Ross Null Software
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM baffle/flocking material
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Improving mirror figure
- Re: ATM edgepoint under Milles-Lacroix, what to do?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Tubes
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Re: atm-digest V1 #1175
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Re: atm-digest V1 #1175
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM An even crazier idea for a DEEP HACKER
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Gregorian Plans.
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Waineo Motor torque question
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Gregorian Plans. - VERY LARGE DC supplies. - Bunch-O-Questions.
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Re: 8" f/6 with 9" ID tube... advice and source?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM RE: True Confessions
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Pitching
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM Cutting tiles for tile-and-plater tools
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Bying Mirror Blanks in EU ?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM the 7mm exit pupil myth
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Regrind this doublet??
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Books in ATM FAQ
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Sucking vs. Blowing
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Sucking vs. Blowing
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: Books in ATM FAQ
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: request: ATM FAQ
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM forwarded message about dog biscuit
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Kitchen interferometry
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM threaded inserts for truss tubes- where?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Kitchen interferometry
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM threaded inserts for truss tubes- where?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM To glue or not to glue...?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Sealing plywood on dobs
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Sealing plywood on dobs
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Fw: Dod problems
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM "Un-scratching" a mirror?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM Source for Stepper Translation Stages?
- From: Steve Scampini <scampini@hp-mpg.an.hp.com>
- Re: ATM Questions on 8" f/5 design
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM How do I figure mirror to focuser length?
- From: Steve Vegos <yovw@cdsnet.net>
- ATM: Cutting Channels in Pitch Lap
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM Sizing program available.
- From: "Steven de Haas" <sedehaas@innercite.com>
- Re: ATM Which Wood Would you use?
- From: Suzanne Sarlette/Gerald Pearson <suegerry@muscanet.com>
- Re: ATM Sealing plywood on dobs
- From: Suzanne Sarlette/Gerald Pearson <suegerry@muscanet.com>
- ATM Building a spectrohelioscope
- From: "Sylvain Rondi" <Rondi@wanadoo.fr>
- ATM Ronchi Test Question
- From: Talbert Malone <TM85010@uafsysb.uark.edu>
- ATM Dry at the edges
- From: Talbert Malone <TM85010@uafsysb.uark.edu>
- Re: ATM Closeup camera, nearsightedness
- From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
- RE: ATM mounting ideas for Solar Skreen
- From: tasimmons@ccgate.hac.com
- ATM Gear reduction
- From: tg@utstat.toronto.edu
- ATM where to start
- From: Tim <teash@skyenet.net>
- Re: ATM where to start
- From: Tim <teash@skyenet.net>
- ATM Thanks to everyone (Re. Where to start)
- From: Tim <teash@skyenet.net>
- ATM 6" or 8" mirror
- From: Tim <teash@skyenet.net>
- ATM newport glass and not annealed
- From: Tim <teash@skyenet.net>
- ATM tube length
- From: Tim <teash@skyenet.net>
- ATM which one first
- From: Tim <teash@skyenet.net>
- Re: ATM forwarded message on Subject: Focuser to Mirror dist
- From: Tim Poulsen <poulsen@netacc.net>
- ATM Stripping silver coating
- From: Tim Poulsen <poulsen@netacc.net>
- Re: ATM Re: atm-digest V1 #1186
- From: Tim Poulsen <poulsen@netacc.net>
- ATM Follow-up to stripping silver
- From: Tim Poulsen <poulsen@netacc.net>
- Re: ATM Clock Drive Tune-up
- From: Tom Coan <tcoan@teleport.com>
- Re: ATM: Cutting Channels in Pitch Lap
- From: Tom Lum <toml@ccsi.com>
- Re: ATM Reply - Stabilite mirror opinions
- From: "Tommy Gooch II" <telescopenut@hotmail.com>
- Re: ATM Cost of making a 8" telescope
- Re: ATM parabolizing fast mirrors
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- Re: ATM Odd Polishing Problem
- Re: ATM Introducing myself
- Re: ATM Teflon source
- Re: ATM Compessed gas mirror cleaner
- Re: ATM Compessed gas mirror cleaner (Off Topic)
- Re: ATM Dealing with McMaster-Carr
- Re: ATM Sealing plywood on dobs
- Re: ATM: Cutting Channels in Pitch Lap
- ATM Re:
- Re: ATM "Un-scratching" a mirror?
- Re: ATM question on coma...
- Re: ATM Don't be too quick to coat that mirror
- Re: ATM Ball Bearing Light Source
- Re: ATM: Cutting Channels in Pitch Lap
- Re: ATM Focal lgh
- ATM RE: atm-digest V1 #1209
- From: "Wagner,Rick [NCR]" <Rick.Wagner2@ec.gc.ca>
- Re: ATM homemade finder
- From: "Walter Banks" <walter@bytecraft.com>
- Re: ATM homemade finder
- From: "Walter Banks" <walter@bytecraft.com>
- Re: ATM use a camera-lens as refractor ?
- From: "Walter Banks" <walter@bytecraft.com>
- Re: ATM QuickCam for Astrophotography
- From: "Walter Banks" <walter@bytecraft.com>
- Re: ATM Advice on Drilling Glass
- From: Will Flor <will@will-flor.com>
- Re: ATM: 8" f/6 with 9" ID tube... advice and source?
- From: William E Byrd <web01@flash.net>
- Re: ATM Mounting Ebony star
- From: William E Byrd <web01@flash.net>
- ATM Dusting
- From: William E Byrd <web01@flash.net>
- Re: ATM Black Paint
- From: William E Byrd <web01@flash.net>
- ATM zoom eypieces
- From: Zack Burtsche <zackb@icat.com>
- FW: ATM zoom eypieces
- From: Zack Burtsche <zackb@icat.com>
Mail converted by MHonArc 2.1.0