Amateur Telescope Makers (ATM) Archive for JUN97 - by author

• Thread Index

• ATM 12 micron blues
  • From: "." <cjf@idirect.com>
• ATM glass-pieces instead of tiles ?
  • From: Jörg Rudolph <rudolphj@pprz02.hrz.Uni-Marburg.DE>
• erect image in finder telescope ATM
  • From: Ajay Talwar <ajayt@del2.vsnl.net.in>
• ATM erect image finder
  • From: Ajay Talwar <ajayt@del2.vsnl.net.in>
• ATM eyepiece barrels? (1.25", filter threaded)
  • From: akkana@best.com (Akkana)
• Re: ATM Luggage and diagonal sizes
  • From: "Alan Cairncross" <acairnx@onaustralia.com.au>
• ATM Mercury Ring Edge Support
  • From: "Alan Cairncross" <acairnx@onaustralia.com.au>
• ATM 18 Point Flotation Cell
  • From: "Alan Cairncross" <acairnx@onaustralia.com.au>
• Re: SV: ATM barlows, magnification
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• (Fwd) Re: ATM barlows, magnification and also averted vision
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• Re: SV: (Fwd) Re: ATM barlows, magnification and also a
  • From: "Alan Levin" <ailevin@ix.netcom.com>
• ATM hardware question
  • From: alberts@amazed.nl (Albert Menno Schuitema)
• ATM Calculating Secondary Offset
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• ATM More company bashing please
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• RE: ATM Meade report
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• RE: ATM Eight inch F8 Design
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• ATM Airline overhead compartment size
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• Re: ATM Eight inch F8 Design
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• Re: ATM offset ? from Rien
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• ATM Why floating mirror cell?
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• ATM Alternative mirror technologies
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• RE: ATM Wooden Tube
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Anderson, Jay" <andeja@mail.va.gov>
• ATM Archives updated for May 1997
  • From: "Andy Steere" <andy@www.system.missouri.edu>
• Re: ATM COST: Big Dob vs. Just the Optics?
  • From: andydtg@phoenix.net
• Re: ATM Collimation, the Truth?
  • From: andydtg@phoenix.net
• Re: ATM 27 point support
  • From: andydtg@phoenix.net
• Re: ATM Rotating Cradle Rings
  • From: andydtg@phoenix.net
• Re: ATM Amateur Anodizing?
  • From: andydtg@phoenix.net
• Re: ATM - West System Epoxy and wood
  • From: andydtg@phoenix.net
• Re: ATM plastic film for reflex finder?
  • From: andydtg@phoenix.net
• Re: ATM Backyard Observatory
  • From: andydtg@phoenix.net
• Re: ATM Followup: Copier Drums & Lenses.
  • From: andydtg@phoenix.net
• Re: ATM (no subject)
  • From: andydtg@phoenix.net
• Re: ATM (no subject)
  • From: andydtg@phoenix.net
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: andydtg@phoenix.net
• Re: ATM Drill Presses/Drilling
  • From: andydtg@phoenix.net
• Re: ATM schmidt camera
  • From: andydtg@phoenix.net
• Re: ATM schmidt camera
  • From: andydtg@phoenix.net
• Re: ATM schmidt camera
  • From: andydtg@phoenix.net
• Re: ATM Non-rotating Helical focuser
  • From: andydtg@phoenix.net
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes (fwd)
  • From: andydtg@phoenix.net
• Re: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• RE: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re:ATM Mirror Cells and Aluminizing
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• RE: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Homemade Ronchi Grating improved
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM keck, off axis mirrors, and machining glass
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Has anyone worked with membrane mirrors?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM keck, off axis mirrors, and machining glass
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM keck, off axis mirrors, and machining glass
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM glass-pieces instead of tiles ?
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• ATM about Cassegrain
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: SV: ATM Collimating Newtonians
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Cassegrainian? Advice needed
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• ATM Optical Path Lengt
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Cheap Astrositall
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Interchanging tool and blank
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• ATM Mercury: from the liquid mirror thread
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• Re: ATM Interchanging tool and blank
  • From: astillma@nit.AirTouch.COM (Anthony Stillman)
• RE: ATM Mirror Cells and Aluminizing
  • From: Art Russell <artrussell@mindspring.com>
• ATM Ultimate Power Supply: Laser Collimation
  • From: Art Russell <artrussell@mindspring.com>
• ATM Refractors and projection TV's
  • From: Bagheera <bagheera@worldnet.att.net>
• ATM 5" Bino Assembly questions
  • From: Bagheera <bagheera@worldnet.att.net>
• ATM Laser Pointer
  • From: Barbara & Matt <B.Smerald@worldnet.att.net>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: Barbara & Matt <B.Smerald@worldnet.att.net>
• ATM Ronchi vs Colllimation
  • From: Barbara Smerald <B.Smerald@worldnet.att.net>
• ATM Forever dreaming : What to do with a SHORT focus spherical mirror?
  • From: "Bevan HARRIS" <BMH@bigpond.com>
• Re: ATM suiter comments on recoating issues
  • From: Bill & Tracy Marriott <btk@pacbell.net>
• Re: ATM QUESTIONS on mirror kit
  • From: Bill & Tracy Marriott <btk@pacbell.net>
• Re: ATM Where can I find Gugolz 64?
  • From: Bill & Tracy Marriott <btk@pacbell.net>
• Re: ATM testing and refiguring existing 6" F5 mirror.......
  • From: Bill & Tracy Marriott <btk@pacbell.net>
• Re: ATM Eyeballs and Razor Blades
  • From: Bill & Tracy Marriott <btk@pacbell.net>
• Re: ATM- Free telescope tubes
  • From: "Bill Prewitt" <bprewitt@newreach.net>
• ATM Rotating Cradle Rings
  • From: Billy Rudock <Billy_Rudock@notes.seagate.com>
• Re: ATM Newbie Q. about Figuring & Looking for Articles
  • From: Billy Rudock <Billy_Rudock@notes.seagate.com>
• Re: ATM plastic film for reflex finder?
  • From: Billy Rudock <Billy_Rudock@notes.seagate.com>
• Re: ATM FREE TELESCOPE TUBES!
  • From: Billy Rudock <Billy_Rudock@notes.seagate.com>
• Re: ATM Backyard Observatory
  • From: Billy Rudock <Billy_Rudock@notes.seagate.com>
• ATM figuring
  • From: Bob Hazel <machead@qadas.com>
• Re: ATM Homemade Ronchi Grating! It Works!
  • From: Bob Hazel <machead@qadas.com>
• ATM A sphere/Figuring
  • From: Bob Hazel <machead@qadas.com>
• ATM Foucault Readings
  • From: Bob Hazel <machead@qadas.com>
• ATM Focusing question
  • From: Bob Hazel <machead@qadas.com>
• ATM barlows, magnification
  • From: Bob Hazel <machead@qadas.com>
• ATM Re: atm-digest V1 #730
  • From: Bob Lombardi <blombard@iu.net>
• Re: ATM Help with ALICE !
  • From: Bob Scholtz <rscholtz@iquest.net>
• Re: ATM %$^%##%!! Rings won't smooth
  • From: Bob Scholtz <rscholtz@iquest.net>
• ATM Collimation question
  • From: Brad Davy <bdavy@bigdog.fred.net>
• ATM Star Testing Results
  • From: Brad Davy <bdavy@bigdog.fred.net>
• Re: ATM (no subject)
  • From: Brad Davy <bdavy@bigdog.fred.net>
• Re: ATM Eight inch F8 design
  • From: Brad Davy <bdavy@bigdog.fred.net>
• Re: ATM Eight inch F8 Design
  • From: Brad Davy <bdavy@bigdog.fred.net>
• Re: ATM Folloup: I Hate Dobsonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Collimation, the Truth?
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Homemade Ronchi Grating improved
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Collimation, the Truth?
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Homemade Ronchi Grating improved
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: SV: ATM Collimating Newtonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: SV: ATM Collimating Newtonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: SV: ATM Collimating Newtonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: SV: ATM Collimating Newtonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Optical Collimation, the True Story?
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• ATM Re: Collimating Newtonians with Laser
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Collimating Newtonians
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Optical Collimation, the True Story?
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Illumination/Resolution Question
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM QUESTIONS on mirror kit
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM anodizing
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Cheap Astrositall
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Optical adhesives: Types? Procedures? Sources?
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• ATM netiquette again
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM offset ? from Rien
  • From: Bratislav.Curcic@uab.ericsson.se (Bratislav Curcic)
• Re: ATM Experiment #1 and questions
  • From: Brian Dodge <bdodge@acpub.duke.edu>
• Re: ATM Amateur Anodizing?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Anodizing ink, also PCV tubes
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Re: atm pipe fittings
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Graphite fishing poles
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM struggling to create a strong vacuum
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Confused
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Non-rotating Helical focuser
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Non-rotating Helical focuser
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: "Bruce D. Sayre" <sayre@foothill.net>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM epoxy
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM beginner mirror size.
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Folloup: I Hate Dobsonians
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM re: I hate Dobsonians......
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM 27 point support
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Identify 5" Lenses?
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Collimation, the Truth?
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Wood, weather, and Dobsonians
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM - West System Epoxy and wood
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM - West System Epoxy and wood
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Collimating Newtonians
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Dotting the Secondary
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Followup: Copier Drums & Lenses.
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM polishing question
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Making Pitch Laps
  • From: Bruce Swayze <swayze@europa.com>
• ATM Vibration Quick Fix?
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Dobsonian for visual/photo use
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Dobsonian mount height
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Olympus OM-2 and mirror weights
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Pitch tool: tick enough?
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Bruce Swayze <swayze@europa.com>
• Re: ATM Tumble Polish
  • From: Bruce Swayze <swayze@europa.com>
• ATM Collimating Newtonians
  • From: "Bryan Greer" <bgreer@fpi-protostar.com>
• ATM Re: Collimation
  • From: "Bryan Greer" <bgreer@fpi-protostar.com>
• ATM Reminder of easy explanatory page!
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM LBT???
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATMJ???
  • From: BRYAN LEENHEER <BLEENHEE@millersqa.com>
• ATM SPAM - hootowl.com
  • From: "Bryan Neil Thrailkill" <thrailkill@spec.com>
• Re: ATM Prescriptions?
  • From: Bryan Neil Thrailkill <thrailkill@spec.com>
• Re: ATM spams, mail bombing, a msg from the list owner
  • From: Bryan Neil Thrailkill <thrailkill@spec.com>
• Re: ATM Mirror Cells and Aluminizing
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM lit led contest
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM ad: 12 micron blues
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Re: Help!
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM Where can I find Gugolz 64?
  • From: Buck Childers <buckchil@sound.net>
• ATM keck, off axis mirrors, and machining glass
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Cary Chleborad <bennu@ns.net>
• ATM scepticism
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: CescoWEB@aol.com
• ATM Talking telescopes
  • From: Charles Broward <afn43753@afn.org>
• ATM Laser Collimators
  • From: cshaw@ghg.net (Charles W. Shaw)
• Re: ATM Laser Collimators
  • From: cshaw@ghg.net (Charles W. Shaw)
• ATM RE: Equitorital Platforms
  • From: cshaw@ghg.net (Charles W. Shaw)
• ATM Mirror protection
  • From: "Chris Martin" <cmartin@rdl.co.uk>
• ATM DMD-3 hand controller--bad IC
  • From: Christopher Scott <CJScott@worldnet.att.net>
• ATM DC dual axis drive controller
  • From: Christopher Scott <CJScott@worldnet.att.net>
• Re: ATM Star test question
  • From: Christopher Scott <CJScott@worldnet.att.net>
• Re: Basic optics (was:ATM Star test question)
  • From: Christopher Scott <CJScott@worldnet.att.net>
• ATM Univ Optics???
  • From: Christopher Scott <CJScott@worldnet.att.net>
• re: ATM wood protection
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Intro (Well, sort of...)
  • From: Chuck Knight <cknight@flash.net>
• ATM Liquid mirrors
  • From: Chuck Knight <cknight@flash.net>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Chuck Knight <cknight@flash.net>
• Re: ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Re: ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Chuck Knight <cknight@flash.net>
• Re: ATM Wooden Tube (fwd)
  • From: Chuck Knight <cknight@flash.net>
• ATM Newbie Question...Microfacets, What are they?
  • From: CHUCK MORFORD <MORFORD.CHUCK@EPAMAIL.EPA.GOV>
• ATM testing and refiguring existing 6" F5 mirror.......
  • From: CHUCK MORFORD <MORFORD.CHUCK@EPAMAIL.EPA.GOV>
• ATM: Plaster Tool
  • From: Claude Serquet <claude@zugernet.ch>
• RE: ATM Blanks in EU
  • From: Claude Serquet <claude@zugernet.ch>
• Re: ATM collimation, The real truth?
  • From: Clint Bach <clintbach@earthlink.net>
• ATM Anodizing ink, also PCV tubes
  • From: Clint Bach <clintbach@earthlink.net>
• ATM Scopes that STAY in collimation
  • From: Clint Bach <clintbach@earthlink.net>
• Re: ATM Mirror Cells and Aluminizing
  • From: Cooper <scooper@robles.callutheran.edu>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM Help me Obi-wan Kanobi
  • From: Cooper <scooper@robles.callutheran.edu>
• ATM Soap in CeO
  • From: Cooper <scooper@robles.callutheran.edu>
• RE: ATM Tile Tools
  • From: Curt Thompson <curt.thompson@attws.com>
• ATM FW: SPAM - Equipment financing for your business.
  • From: Curt Thompson <curt.thompson@attws.com>
• RE: ATM FW: SPAM - Equipment financing for your business.
  • From: Curt Thompson <curt.thompson@attws.com>
• RE: ATM FW: SPAM - Equipment financing for your business.
  • From: Curt Thompson <curt.thompson@attws.com>
• Re:ATM Mirror Cells and Aluminizing
  • From: Damian Kessler <dkessler@crl.nmsu.edu>
• ATM Identify Optical flat
  • From: Damian Kessler <dkessler@crl.nmsu.edu>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Drawing Exchange Format?
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM woodnot
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: SV: ATM I'm new, where should I start!
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Two questions please
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM [Fwd: RCA: Astro Class wrapup (LONG)]
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM More company bashing please
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM getting feet wet
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Newport/W-B
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM First mirror, first grit !finished!
  • From: Dan Brown <brownd@holmes.uchastings.edu>
• Re: ATM glass-pieces instead of tiles ?
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Some more silly questions
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Fw: ATM glass-pieces instead of tiles ?
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: SV: ATM Best black paint to repaint Starfinder
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM interpreting Ronchi test
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM barlows, magnification and also averted vision
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM barlows, magnification and also averted vision
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Wooden Tube (fwd)
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM scratches
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM sleeks
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• ATM-Graphite and fiberglass tube for Truss Tubes
  • From: DarenClay@aol.com
• ATM Astronomy & S&T Indices
  • From: Darryl Stanford <dstanfor@ccsf.cc.ca.us>
• Re: ATM More company bashing please
  • From: Darryl Stanford <dstanfor@ccsf.cc.ca.us>
• Re: ATM Epoxy for plaster tools
  • From: Darwin Teague <darwin@indy.net>
• Re: ATM Mosby Test
  • From: Darwin Teague <darwin@indy.net>
• Re: ATM Some more silly questions
  • From: Darwin Teague <darwin@indy.net>
• ATM Ronchi null (Mobsby) test
  • From: Darwin Teague <darwin@indy.net>
• ATM ronchi testing
  • From: Darwin Teague <darwin@indy.net>
• Re: ATM Backyard Observatory
  • From: Darwin Teague <darwin@indy.net>
• ATM figuring - how am I doing?
  • From: Darwin Teague <darwin@indy.net>
• ATM tex results - what do they mean?
  • From: Darwin Teague <darwin@indy.net>
• ATM scratches
  • From: Darwin Teague <darwin@indy.net>
• ATM Re: Herschelian reflex finder
  • From: Dave Bell <dbell@bayarea.net>
• Re: ATM How to make Ronchi screen?
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM How to make Ronchi screen?
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM How to make Ronchi screen?
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM polishing microfacets
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Sanding rim and back of mirror
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM reflex finder
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Secondary Mirrors
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Secondary Mirrors
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Secondary Mirrors
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Constant voltage transformer
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Newbie question...Sonotube thickness...
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Why floating mirror cell?
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Mirror Edge Support
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• Re: ATM Construction adhesive
  • From: Dave McCarter <McCarterD@claven.fanshawec.on.ca>
• RE: ATM Luggage and diagonal sizes
  • From: Dave Sopchak <das@po.cwru.edu>
• RE: ATM Graphite fishing poles uses as trusses.
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM struggling to create a strong vacuum
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM struggling to create a strong vacuum
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM FREE TELESCOPE TUBES!
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Newbie Thanks/Cell Query
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Full Moon Collimation
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Testing Results 8" Old Coulter Mirror
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Non-rotating Helical focuser
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM First light on thin tabletop mirror
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM non rotating helical focuser
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM More company bashing please
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM re:Optics
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM How Polishing Works
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM re:Optics
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: Re[2]: ATM "The New S&T"
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM "The New S&T"
  • From: "David B. Toth" <ve3gyq@amsat.org>
• ATM Cost of Big Dobs vs Optics
  • From: David Brooks <davidbr@microsoft.com>
• ATM Airy Disk?
  • From: David Brooks <davidbr@microsoft.com>
• ATM getting feet wet
  • From: David Brooks <davidbr@microsoft.com>
• ATM (no subject)
  • From: David Eric Allen <ericallen@worldnet.att.net>
• ATM Re: Binocular telescope
  • From: David Eric Allen <ericallen@worldnet.att.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM Vibration in Large Metal Scopes
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM Vibration in Large Metal Scopes
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM Pitch Bansihed by Wife-- No Way!
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM barlows, magnification
  • From: "David Lilly" <dhl@sprynet.com>
• Re: ATM struggling to create a strong vacuum
  • From: street@juno.com (David R. Street)
• ATM COST: Big Dob vs. Just the Optics?
  • From: David Sleeter <sleete19@idt.net>
• ATM Folloup: I Hate Dobsonians
  • From: David Sleeter <sleete19@idt.net>
• ATM Vibration in Large Metal Scopes
  • From: David Sleeter <sleete19@idt.net>
• ATM Homemade Ronchi Grating! It Works!
  • From: David Sleeter <sleete19@idt.net>
• ATM Identify 5" Lenses?
  • From: David Sleeter <sleete19@idt.net>
• ATM Indentify 4" Lens?
  • From: David Sleeter <sleete19@idt.net>
• ATM Identify Optical Flat?
  • From: David Sleeter <sleete19@idt.net>
• ATM Homemade Reflex Sight Rings
  • From: David Sleeter <sleete19@idt.net>
• ATM Amateur Anodizing?
  • From: David Sleeter <sleete19@idt.net>
• ATM A Bit of Humor
  • From: David Sleeter <sleete19@idt.net>
• ATM Bearing Material
  • From: David Sleeter <sleete19@idt.net>
• ATM Source: Epoxy & Carbon Fiber
  • From: David Sleeter <sleete19@idt.net>
• ATM Source: Anodizing Dyes
  • From: David Sleeter <sleete19@idt.net>
• ATM FREE TELESCOPE TUBES!
  • From: David Sleeter <sleete19@idt.net>
• ATM Collimating Dots should be small
  • From: David Sleeter <sleete19@idt.net>
• ATM Followup: Copier Drums & Lenses.
  • From: David Sleeter <sleete19@idt.net>
• ATM Vibration Quick Fix?
  • From: David Sleeter <sleete19@idt.net>
• ATM AGAIN: Black anodizing dye
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Re: correction
  • From: David Sleeter <sleete19@idt.net>
• ATM My Own Meade Story
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Anodizing dye; Correction
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Anodizing dye; Correction
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Re: correction
  • From: David Sleeter <sleete19@idt.net>
• ATM Re: On Milling Machines
  • From: David Sleeter <sleete19@idt.net>
• ATM Followup: Milling Machines
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Re: On Milling Machines (fwd)
  • From: David Sleeter <sleete19@idt.net>
• ATM Followup: Smithy Lathe/Milling Machine
  • From: David Sleeter <sleete19@idt.net>
• ATM Troublsome Focault Testers
  • From: David Sleeter <sleete19@idt.net>
• ATM Anodizing Dyes: Clariant First Order Policy
  • From: David Sleeter <sleete19@idt.net>
• ATM About Smithy Clones
  • From: David Sleeter <sleete19@idt.net>
• ATM Re: Jack Schmidling Productions
  • From: David Sleeter <sleete19@idt.net>
• ATM Good Eyepieces
  • From: David Sleeter <sleete19@idt.net>
• ATM Lathes Should be MASSIVE
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM What is Going On Under the Pitch Lap?
  • From: David Sleeter <sleete19@idt.net>
• ATM How Polishing Works
  • From: David Sleeter <sleete19@idt.net>
• ATM Imaging Heat from Polishing
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Small Mirror/Lens Wanted
  • From: David Sleeter <sleete19@idt.net>
• ATM spam - one last note!
  • From: "David V. Fansler" <dfansler@rias.COM>
• ATM Homemade Ronchi Grating improved
  • From: ketelsen@as.arizona.edu (Dean Ketelsen)
• RE: ATM Has anyone worked with membrane mirrors?
  • From: DWK@NEWTON.NPL.CO.UK (Declan Kruppa)
• RE: ATM Has anyone worked with membrane mirrors?
  • From: DWK@NEWTON.NPL.CO.UK (Declan Kruppa)
• ATM Reflector plan
  • From: Dennis Kung <dkg@idirect.com>
• ATM Newtonian Design
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Reflector plan
  • From: Dennis Kung <dkg@idirect.com>
• ATM Tube
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Newtonian Design
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Newtonian Design
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Newtonian Design
  • From: Dennis Kung <dkg@idirect.com>
• ATM 8" kit received
  • From: Dennis Kung <dkg@idirect.com>
• ATM Tile Theories
  • From: Dennis Kung <dkg@idirect.com>
• ATM Sanding rim and back of mirror
  • From: Dennis Kung <dkg@idirect.com>
• ATM Interchanging tool and blank
  • From: Dennis Kung <dkg@idirect.com>
• ATM Newport vs W-B
  • From: Dennis Kung <dkg@idirect.com>
• ATM Re: correction
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Sanding rim and back of mirror
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Re: correction
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Interchanging tool and blank
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Newport vs W-B
  • From: Dennis Kung <dkg@idirect.com>
• ATM Re: Mirror Blanks
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Interchanging tool and blank
  • From: Dennis Kung <dkg@idirect.com>
• ATM Torus CC04
  • From: Dennis Kung <dkg@idirect.com>
• Re: ATM Torus CC04
  • From: Dennis Kung <dkg@idirect.com>
• ATM: Laser Interferometer Book
  • From: Dick Tremaine <dick@tremaine.com>
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: "Diego Protas" <dprotas@hotmail.com>
• ATM Cassegrainian? Advice needed
  • From: "Diego Protas" <dprotas@hotmail.com>
• ATM: Mirror grinding update
  • From: Don Loftus <dloftus@edu15.coe.ufl.edu>
• RE: ATM Equatorial Platforms?
  • From: Don Loftus <dloftus@edu15.coe.ufl.edu>
• RE: ATM Equatorial Platforms?
  • From: Don Loftus <dloftus@edu15.coe.ufl.edu>
• RE: ATM blue streaks
  • From: Don Loftus <dloftus@edu15.coe.ufl.edu>
• Diagonal Offset adjustment (was Re:ATM Collimation, the truth)
  • From: don.h.young@lmco.com
• ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: don.h.young@lmco.com
• ATM Manual Slow Motion Ctrls for Pipe Fitting Eq Mount
  • From: don.h.young@lmco.com
• Subject: RE: ATM Must avoid helical focuser must make crayford
  • From: don.h.young@lmco.com
• Re: ATM Folloup: I Hate Dobsonians
  • From: Donald Clement <clement@INETWORLD.NET>
• ATM woodnot
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Herschelian Reflex Finder update
  • From: Donald Clement <clement@INETWORLD.NET>
• Re: ATM Homemade Reflex Sight Rings
  • From: Donald Clement <clement@INETWORLD.NET>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Wood, weather, and Dobsonians.
  • From: Donald Clement <clement@INETWORLD.NET>
• Re: ATM plastic film for reflex finder?
  • From: Donald Clement <clement@cqt.com>
• ATM HTS Graphite Composite
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Bearing Material
  • From: Donald Clement <clement@INETWORLD.NET>
• Re: ATM Finder optics
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Where can I find Gugolz 64?
  • From: Donald Clement <clement@cqt.com>
• Re: ATM 2" focuser actual ID Diameter
  • From: Donald Clement <clement@cqt.com>
• Re: ATM RE: Erect image finder
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: Donald Clement <clement@INETWORLD.NET>
• Re: ATM %$^%##%!! Rings won't smooth
  • From: Donald Clement <clement@cqt.com>
• ATM Grease and Optics
  • From: Donald Clement <clement@cqt.com>
• Re: ATM Grease and Optics
  • From: Donald Clement <clement@cqt.com>
• Re: ATM scepticism
  • From: Donn Starkey <dstarkey@solaris1.mysolution.com>
• ATM Esterior wood and metal coatings
  • From: Donn Starkey <dstarkey@solaris1.mysolution.com>
• Re: ATM COST: Big Dob vs. Just the Optics?
  • From: "Douglas H. Bock" <dougbock@kode.net>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• Re: ATM Homemade Ronchi Grating! It Works!
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• Re: ATM Has anyone worked with membrane mirrors?
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• ATM Ronchi formulas
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• ATM Re: Ronchi formulas
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• Re: ATM Dobsonian for visual/photo use
  • From: hennecke@dbag.ulm.DaimlerBenz.COM (Dr. Marcus Hennecke)
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: DRDKCCD@aol.com
• ATM remove
  • From: DRDKCCD@aol.com
• Re: ATM Question about telescope design(historical)
  • From: Ed Cook <edrico@ncn.net>
• Re: ATM Luggage and diagonal sizes
  • From: Ed Cook <edrico@ncn.net>
• Re: ATM Luggage and diagonal sizes
  • From: Ed Cook <edrico@ncn.net>
• Re: ATM Re: atm pipe fittings
  • From: Ed Cook <edrico@ncn.net>
• Re: ATM Backyard Observatory (fwd)
  • From: Ed Cook <edrico@ncn.net>
• ATM Re: correction
  • From: Ed Cook <edrico@ncn.net>
• ATM D-K
  • From: Ed Cook <edrico@ncn.net>
• ATM Cass questions
  • From: Ed Cook <edrico@ncn.net>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: "Ed Hood" <aes@southwind.net>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: "Ed Hood" <aes@southwind.net>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "Ed Hood" <aes@southwind.net>
• ATM Collimation - Mechanical Alignment
  • From: "Ed Hood" <aes@southwind.net>
• ATM Re: Old new pitch
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM Re: I hate dobsonians
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM RE: Erect image finder
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM Re: Fine grinding and pitch laps
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM Re: wooden tube
  • From: Eric Allen <ericallen@worldnet.att.net>
• Re: ATM Re: wooden tube
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM Warped tabletop
  • From: Eric Allen <ericallen@worldnet.att.net>
• Re: ATM Re: wooden tube
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM Making small mirrors
  • From: Eric Allen <ericallen@worldnet.att.net>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: "Esparza, Luis" <LEsparza@harman.com>
• ATM Tumble Polish
  • From: "Esparza, Luis" <LEsparza@harman.com>
• ATM Schmidt Cameras
  • From: Frank Mraz <FJMRAZ@worldnet.att.net>
• Re: ATM Mirror Cells and Aluminizing
  • From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
• Re:ATM Homemade Ronchi Grating
  • From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
• Re:ATM Graphite fishing poles
  • From: Frank Shaffer <frank@iolanthe.gsfc.nasa.gov>
• ATM Takahashi refractors
  • From: Frank Vinnerlid <frank.vinnerlid@swipnet.se>
• ATM A newbie's first success
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Backyard Observatory (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM low profile focuser (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Lens making texts?
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: ATM Lens making texts?
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: ATM [Fwd: RCA: Astro Class wrapup (LONG)] (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Re: On Milling Machines (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Must...avoid...helical...focuser..must...make...crayford (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Any eyepiece data available in one place? (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Wooden Tube (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Separating Mirror & Tool? (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM Shipping Large Mirrors
  • From: Fred Floberg <atm@cyphyn.nai.net>
• ATM: Sources for Autocollimators (fwd)
  • From: Fred Floberg <atm@cyphyn.nai.net>
• Re: ATM Re: atm pipe fittings
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Mirror Cells and Aluminizing
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Wood, weather, and Dobsonians.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Wood, weather, and Dobsonians.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Some more silly questions
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM scepticism
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Cassegrainian? Advice needed
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Optical Path Lengths For Star Diagonals
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Graphite fishing poles uses as trusses.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: SV: ATM Optical Path Lengths For Star Diagonals
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Collimation question
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Luggage and diagonal sizes
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Quality spray paint.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: SV: ATM Collimation question
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Babbitt metal source.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Babbitt metal source.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Collimating Newtonians
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Laser Collimators
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM (no subject)
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Lens making texts?
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• ATM Meade eyepieces.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Transporting an 18" Dob
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Bullet Proof Scope/Focuser For Science Museum Display
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Full Moon Collimation
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM InfraRed Light around astrophotographers
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: "Fred Maxwell - No spam e-mail accepted." <fmaxwell@erols.com>
• Re: ATM Collimation, the Truth?
  • From: Gary Myers <gmyers@CetLink.Net>
• [Fwd: Re: ATM Collimating Newtonians]
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Collimating Newtonians
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM (no subject)
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM Collimation (again)
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM (no subject)
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: SV: ATM Collimating Newtonians
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM (no subject)
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM (no subject)
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Collimation (again)
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Collimating Newtonians
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: SV: ATM Collimating Newtonians
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM (no subject)
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Collimating Newtonians
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Smalll dots on secondary
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Two questions please
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Meade
  • From: Gary Myers <gmyers@CetLink.Net>
• ATM Bashing
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Gary Myers <gmyers@CetLink.Net>
• Re: ATM beginner mirror size.
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Collimation, the Truth?
  • From: Gary Seronik <gseronik@direct.ca>
• ATM Illumination/Resolution Question
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Illumination/Resolution Question
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Secondary Mirrors
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Newbie question...Sonotube thickness...
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Newbie question...Sonotube thickness...
  • From: Gary Seronik <gseronik@direct.ca>
• Re: ATM Meade report
  • From: Gary Seronik <gseronik@direct.ca>
• ATM Encoders
  • From: Gary Wolanski <gary_wolanski@bc.sympatico.ca>
• Re: ATM Two questions please
  • From: gwoods@albany.net (Gary Woods)
• ATM Meade focuser and tube strap replacements?
  • From: gcbryan@ix.netcom.com
• ATM Meade Starfinder clock drive problem
  • From: gcbryan@ix.netcom.com
• ATM Best black paint to repaint Starfinder
  • From: gcbryan@ix.netcom.com
• ATM replacing Starfinder 8" EQ stock 2" focuser
  • From: gcbryan@ix.netcom.com
• ATM Meade report
  • From: gcbryan@ix.netcom.com
• ATM Equatorial mounts
  • From: gcbryan@ix.netcom.com
• ATM Separating a pitch lap from a mirror
  • From: gdudley@swin.edu.au
• Re: ATM glass-pieces instead of tiles ?
  • From: George Korody <GKorody@prodigy.net>
• Re: ATM Tips against stucking tool
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM beginner mirror size.
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM scepticism
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM - West System Epoxy and wood
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM - West System Epoxy and wood
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM low profile focuser (fwd)
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Interchanging tool and blank
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM interpreting Ronchi test
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM schmidt camera
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Eyeballs and Razor Blades
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Pitch tool: tick enough?
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Separating Mirror & Tool?
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Pitch tool: tick enough?
  • From: Gil Stacy <gstacy@premierweb.net>
• ATM fiberglass coverings
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM Ronchi screen
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM truss tube coating
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM Ronchi glue
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM powder coating
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM EZ Poxy
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM W-B blanks
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM flat side
  • From: "Glen Bankston" <microsys@alltel.net>
• ATM Collimating Newtonians
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM Netiquette
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM: Sources for Autocollimators (fwd)
  • From: Gord Seifert <gseifert@uniserve.com>
• Re: ATM Identify 5" Lenses?
  • From: gbt@zia.cray.com (Greg B Titus)
• Re: ATM Wooden Tube (fwd)
  • From: Greg B Titus <gbt@zia.cray.com>
• Re: ATM Telephoto lenses as a small portable telescope...
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM woodnot
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Wood, weather, and Dobsonians.
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Wood, weather, and Dobsonians.
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Amateur Anodizing?
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• ATM Field Derotator
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Followup: Copier Drums & Lenses.
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Novice Lap Question
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Transporting an 18" Dob
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM appropriate commercial scope topics, comment from the list owner
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM replacing Starfinder 8" EQ stock 2" focuser
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Squaring focuser to tube
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Drill Presses/Drilling
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Wooden Tube (fwd)
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATMJ???
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: ATM Olympus OM-2 and mirror weights
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• ATM Separating Mirror & Tool?
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• ATM Separating Mirror & Tool?
  • From: Greg Furtman <gfurtman@Spacestar.Net>
• Re: SV: ATM Collimating Newtonians
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: SV: ATM Collimating Newtonians
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: SV: ATM Collimating Newtonians
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: SV: ATM Collimating Newtonians
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: ATM Transporting an 18" Dob
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM First Newtonian
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM tex.exe wavefront rating ?
  • From: Greg Granville <greg@laser.arl.psu.edu>
• Re: ATM Pitch tool: tick enough?
  • From: Greg Granville <greg@laser.arl.psu.edu>
• ATM Re: Help!
  • From: GregJ888@aol.com
• ATM Re: Help!
  • From: GregJ888@aol.com
• Re: ATM Two questions please
  • From: GregJ888@aol.com
• re: ATM Red led flashlight
  • From: GregJ888@aol.com
• Re[2]: ATM Folloup: I Hate "wooden" Dobsonians
  • From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
• Re[2]: ATM Mirror Cells and Aluminizing
  • From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
• Re: ATM Flashlights from Flowers
  • From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
• Re[2]: ATM Mirror Cells and Aluminizing
  • From: "Hansen, Scott A" <Scott.A.Hansen@jci.com>
• Re: ATM Table Mtn Star Party
  • From: Harry Boswell <hboswell@netdoor.com>
• ATM Newport/W-B
  • From: Harry Boswell <hboswell@netdoor.com>
• Re: ATM suiter comments on recoating issues
  • From: hclaus@clausing.com
• Re: ATM keck, off axis mirrors, and machining glass
  • From: hclaus@clausing.com
• Re: ATM scepticism
  • From: hclaus@clausing.com
• re:ATM Pitch tool: tick enough?
  • From: Howard.Banich@nike.com
• re:Re: ATM %$^%##%!! Rings won't smooth
  • From: Howard.Banich@nike.com
• re:ATM When is a lap too thin?
  • From: Howard.Banich@nike.com
• re:ATM Separating Mirror & Tool?
  • From: Howard.Banich@nike.com
• ATM Star test question
  • From: Howard.Banich@nike.com
• re:Re: ATM Star test question
  • From: Howard.Banich@nike.com
• ATM rough polished surface
  • From: fieldsj@coned.com (J FIELDS)
• Re: ATM rough polished surface
  • From: fieldsj@coned.com (J FIELDS)
• Re: ATM rough polished surface
  • From: fieldsj@coned.com (J FIELDS)
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: "J.O. Williams" <jow@techbase.com>
• Re: ATM Flashlights from Flowers
  • From: "Jack Brindle" <jackb@ricochet.net>
• ATM InfraRed Light around astrophotographers
  • From: "Jack Brindle" <jackb@ricochet.net>
• ATM Yerkes Photos
  • From: Jack Schmidling <arf@mc.net>
• ATM Flashlights from Flowers
  • From: Jack Schmidling <arf@mc.net>
• ATM Dirty Laundry
  • From: Jack Schmidling <arf@mc.net>
• ATM Mosby Test
  • From: Jack Schmidling <arf@mc.net>
• ATM Ronchi
  • From: Jack Schmidling <arf@mc.net>
• ATM Collimation
  • From: Jack Schmidling <arf@mc.net>
• ATM Ronchi Testing
  • From: Jack Schmidling <arf@mc.net>
• Re: ATM Ronchi Testing
  • From: Jack Schmidling <arf@mc.net>
• ATM Offset on Commercial Scopes
  • From: Jack Schmidling <arf@mc.net>
• ATM Finder Lenses
  • From: Jack Schmidling <arf@mc.net>
• ATM Out of the Box
  • From: Jack Schmidling <arf@mc.net>
• ATM Anodizing dye
  • From: Jack Schmidling <arf@mc.net>
• Re: ATM Anodizing dye; Correction
  • From: Jack Schmidling <arf@mc.net>
• ATM Netiquette
  • From: Jack Schmidling <arf@mc.net>
• ATM Re: atm-digest V1 #758
  • From: Jack Schmidling <arf@mc.net>
• ATM Home Made Cameras
  • From: Jack Schmidling <arf@mc.net>
• ATM Re: Anodizing Dyes: Clariant First Order Policy
  • From: Jack Schmidling <arf@mc.net>
• ATM Schmidt Camera
  • From: Jack Schmidling <arf@mc.net>
• Re: ATM Schmidt Camera
  • From: Jack Schmidling <arf@mc.net>
• ATM Re: atm-digest V1 #765
  • From: Jack Schmidling <arf@mc.net>
• ATM Eyeballs and Razor Blades
  • From: Jack Schmidling <arf@mc.net>
• Re: ATM Eyeballs and Razor Blades
  • From: Jack Schmidling <arf@mc.net>
• ATM Drive Corrector
  • From: "James E. Gort" <gort@sonetis.com>
• Re: ATM Newtonian Design
  • From: "James F. Heilman" <heilman@netside.com>
• ATM Stepper Motor for Tracker
  • From: "James F. Heilman" <heilman@netside.com>
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM Meade
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM Confused
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM Focusing problems
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM First Newtonian
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• Re: ATM scratches
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM re:Optics
  • From: James Krushlucki <jkrushl@unibase.Unibase.COM>
• ATM Fiberglass
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Plaster + washers tool
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Re: Replacement focusers
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• ATM Smithy machine tools
  • From: "James P. Crombie" <jpcrombie@pei.sympatico.ca>
• RE: ATM Has anyone worked with membrane mirrors?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• RE: ATM undercorrection
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Drawing Exchange Format?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• RE: ATM Has anyone worked with membrane mirrors?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM On Texereau's Conic Section Formula
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Yet Another S&T Gripe.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM scepticism
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM collimation, The real truth?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Cassegrainian? Advice needed
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Help me Obi-wan Kanobi
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM On Best Deformed (Star) Lap.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM On Best Deformed (Star) Lap.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM correction
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM The offset bugbear.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM D-K
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM First light on thin tabletop mirror
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Pitch tool: tick enough?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Cass questions
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Re: What is Going On Under the Pitch Lap?
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM On Gregorian Design Parameters.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM vibration suppression
  • From: Jamie Powell <jpowell@juliet.stfx.ca>
• ATM Vibration suppression on Building
  • From: Jamie Powell <jpowell@juliet.stfx.ca>
• ATM Non-rotating Helical focuser
  • From: "Jan Saver" <JanSaver@glo.be>
• ATM read this too, please
  • From: "Jan Saver" <JanSaver@glo.be>
• ATM Plastic polishing lap
  • From: zikovsky@geocities.com (Janik Zikovsky)
• ATM Construction adhesive
  • From: zikovsky@geocities.com (Janik Zikovsky)
• ATM ICQ List
  • From: "Jason M. Santos" <jsantos@primenet.com>
• Re: ATM Computer Voice Narration of Objects- Update
  • From: jaleblan@primenet.com (Jay LeBlanc)
• ATM Optical adhesives: Types? Procedures? Sources?
  • From: freeman@netcom.com (Jay Reynolds Freeman)
• Re: ATM beginner mirror size.
  • From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM Equatorial Platforms?
  • From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Jean Marc Becker <Jean-Marc.Becker@wanadoo.fr>
• Re: ATM Folloup: I Hate "wooden" Dobsonians
  • From: Jeff Crilly <jeff@communities.com>
• Re: ATM Binocular Telescope
  • From: Jeff Crilly <jeff@communities.com>
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: Jeff Crilly <jeff@communities.com>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: Jeff Crilly <jeff@communities.com>
• Re: ATM Quality spray paint.
  • From: Jerry <jerryu@mindspring.com>
• ATM Adjustable focal length mirror?
  • From: Jerry <jerryu@mindspring.com>
• Re: ATM plastic film for reflex finder?
  • From: "Jim Edelman" <jedelman@skyweb.net>
• ATM Grind the back?
  • From: "Jim Edelman" <jedelman@skyweb.net>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Jim Edelman" <jedelman@skyweb.net>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Secondary Mirrors
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Squaring focuser to tube
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Squaring focuser to tube
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Newbie Thanks/Cell Query
  • From: Jim Fitch <jf@arn.net>
• Re: FW: ATM Cell Query
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Eyeballs and Razor Blades
  • From: Jim Fitch <jf@arn.net>
• Re: ATM autocollimator
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Newtonian Design
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Collimating Newtonians
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM autocollimator
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Collimation
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM JMI FOCUSERS
  • From: "Jim Fly" <jfly@hiwaay.net>
• ATM Re: JMI FOCUSERS
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Stepper Motor for Tracker
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Stepper Motor for Tracker
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Jim Fly" <jfly@hiwaay.net>
• ATM Re: Sources for Autocollimators
  • From: "Jim Fly" <jfly@hiwaay.net>
• Re: ATM: Sources for Autocollimators (fwd)
  • From: "Jim Fly" <jfly@hiwaay.net>
• ATM Transporting an 18" Dob
  • From: Jim Lawler <jlawler1@san.rr.com>
• Re: ATM Herschelian Reflex Finder
  • From: Jim McKay <james.mckay@yale.edu>
• ATM Question about telescope design(historical)
  • From: Jim McKay <james.mckay@yale.edu>
• Re: ATM truss tube coating
  • From: Jim McKay <james.mckay@yale.edu>
• Re: ATM truss tube coating
  • From: Jim McKay <james.mckay@yale.edu>
• Re: ATM Transporting an 18" Dob
  • From: jrippey@radiks.net (Jim Rippey)
• Re: ATM Transporting an 18" Dob
  • From: jrippey@radiks.net (Jim Rippey)
• ATM Newbie Thanks/Cell Query
  • From: Jim Varney <jamesv@softcom.net>
• Re: ATM Newbie Thanks/Cell Query
  • From: Jim Varney <jamesv@softcom.net>
• ATM public program
  • From: Joe Campbell <jcampb@mindspring.com>
• Re: ATM Digital Sun Dial
  • From: "John A. Maxwell" <jmax@toad.net>
• ATM Help with ALICE !
  • From: John Akers <jakers@cyllene.uwa.edu.au>
• ATM newbie pep talk
  • From: jaanders@europa.com (John Anderson)
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM Re: Stripping of Mirrors (was: Dirtly Laundry)
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Drawing Exchange Format?
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM beginner mirror size.
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM RTV mirror bond
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Re: Speech and Scopes - NEW INFO
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM Source for Fiberglass, Carbon tubes
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Testing Long Focus Mirrors
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Source for Fiberglass, Carbon tubes
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM plastic film for reflex finder?
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM Eight inch F8 Design
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM 5" Bino Assembly questions
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM getting feet wet
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Eight inch F8 design
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM Wooden Tube (fwd)
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: "John D. Gwinner" <gwinner@northnet.org>
• ATM Fiberglass Dyes / Vacuum bags
  • From: "John D. Gwinner" <gwinner@northnet.org>
• Re: ATM: Mirror grinding update
  • From: John Garland <jgarland@morgan.ucs.mun.ca>
• Re: ATM 6" f/6
  • From: John Garland <jgarland@morgan.ucs.mun.ca>
• ATM E-mail to me re. figuring 6" mirrorlems
  • From: John Garland <jgarland@morgan.ucs.mun.ca>
• Re: ATM 8" kit received
  • From: John Garland <jgarland@morgan.ucs.mun.ca>
• eATM
  • From: "John Graves" <john.graves@nashville.com>
• ATM Binocular Telescope
  • From: "John Graves" <john.graves@nashville.com>
• Re: ATM Shipping Large Mirrors
  • From: "John Graves" <john.graves@nashville.com>
• ATM Novice Lap Question
  • From: ic089@cleveland.Freenet.Edu (John H. Svensson)
• ATM Pitch Lap Thanks
  • From: ic089@cleveland.Freenet.Edu (John H. Svensson)
• ATM Sucess with Pitch Lap
  • From: ic089@cleveland.Freenet.Edu (John H. Svensson)
• Re: ATM Schmidt Camera
  • From: John Laborde <jlaborde@ix.netcom.com>
• Re: ATM composite tubes
  • From: John Laborde <jlaborde@ix.netcom.com>
• Re: ATM First Newtonian
  • From: John Laborde <jlaborde@ix.netcom.com>
• Re: ATM Drive Corrector
  • From: John Levreault <jlevro@shore.net>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: John Levreault <jlevro@shore.net>
• RE: ATM Has anyone worked with membrane mirrors?
  • From: John Maxwell <jmax@toad.net>
• ATM Membrane mirrors: JOSA reference
  • From: John Maxwell <jmax@toad.net>
• Dedication (was: Re: ATM Must...avoid...helical...focuser..)
  • From: John Maxwell <jmax@toad.net>
• ATM cerium oxide
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• ATM Pitch tool: tick enough?
  • From: Jonathan Lavoie <jlavoie@infoteck.qc.ca>
• ATM Scholar Planetarium
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• Re: ATM How to make Ronchi screen?
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• Re: ATM Grease and Optics
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• Re: ATM Small Mirror/Lens Wanted
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• Re: ATM Univ Optics???
  • From: Jose Amaury Pereira <jamaury@elogica.com.br>
• ATM Cold cameras
  • From: jmch@cosmos.tid.es (Jose Maria Chercoles Sanchez)
• Re: ATM struggling to create a strong vacuum
  • From: jmch@cosmos.tid.es (Jose Maria Chercoles Sanchez)
• ATM QuickCam on a telescope
  • From: jmch@cosmos.tid.es (Jose Maria Chercoles Sanchez)
• Re: ATM Newport Pre-generated Mirror Blanks
  • From: "Joseph Goins" <joe_goins@hotmail.com>
• ATM help
  • From: "Joseph Goins" <joe_goins@hotmail.com>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: "Joseph Goins" <joe_goins@hotmail.com>
• ATM mak mirrors
  • From: JTGill <jtgill@mis.net>
• ATM Secondary Mirrors
  • From: Jwilli941@aol.com
• Re: ATM Vibration in Large Metal Scopes
  • From: Ken and Teresa Lilja <klilja@enteract.com>
• Re: ATM interpreting Ronchi test
  • From: Ken and Teresa Lilja <klilja@enteract.com>
• ATM Cost of Mels guider design ( Was: I HATE Dobsonians (THAT got your attention!))
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM Mirror Cells and Aluminizing
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM Looking for glass source
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM - West System Epoxy and wood
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM Luggage and diagonal sizes
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM Graphite fishing poles uses as trusses.
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM Re: Collimating Newtonians with Laser
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM Cheap Astrositall
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM: Making a prolate ellipsoid
  • From: Ken Carter <kencar@worldnet.att.net>
• RE: ATM composite tubes
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM: Sources for Autocollimators
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM: Alignment of a SMT
  • From: Ken Carter <kencar@worldnet.att.net>
• ATM: Projection TV Optics
  • From: Ken Carter <kencar@worldnet.att.net>
• Re: ATM Mirror Edge Support
  • From: Ken Harrison <kmh@ozemail.com.au>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Ken Harrison <kmh@ozemail.com.au>
• Re: ATM Binocular Telescope
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Keck, off axis mirrors, and machining glass
  • From: Ken Launie <launiek@cliffy.polaroid.com>
• Re: ATM Plastic polishing lap
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Re: Help!
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: Re[2]: ATM "The New S&T"
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Homemade Ronchi Grating! It Works!
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM collimation
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM - West System Epoxy and wood
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Testing Long Focus Mirrors
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Grind the back?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM I'm new, where should I start!
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Star Testing Results
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: Re[2]: ATM Re: Collimating Newtonians with Laser
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Wedge in Newt mirror?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Pitch laps
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Lens making texts?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Red led flashlight
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Making Pitch Laps
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• ATM Re: Ohio Light Pollution
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Re: correction
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Meade
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM appropriate commercial scope topics, comment from the , list owner
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM netiquette again
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM what aperture, what magnification for visual detection
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM First Newtonian
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Pitch tool: tick enough?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• ATM SPM Clutch Tuneup Advice
  • From: Ken Slater - HLO <KSlater@mail.dec.com>
• Re: ATM Mirror Cells and Aluminizing
  • From: Kevin Bong <kbong@carroll1.cc.edu>
• ATM diagonal questions
  • From: Kevin Bong <kbong@carroll1.cc.edu>
• RE: ATM cleaning primary mirror
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM undercorrection
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: erect image in finder telescope ATM
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM plastic film for reflex finder?
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM plastic film for reflex finder?
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM plastic film for reflex finder?
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM Refractors and projection TV's
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM struggling to create a strong vacuum
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM Transporting an 18" Dob
  • From: Kevin Ferguson <kevin@aquilagroup.com>
• RE: ATM Confused
  • From: kf <kevin@aquilagroup.com>
• RE: ATM About Smithy Clones
  • From: kf <kevin@aquilagroup.com>
• RE: ATM Lathes Should be MASSIVE
  • From: kf <kevin@aquilagroup.com>
• Re: ATM diagonal questions
  • From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
• ATM: copier lenses and marking mirrors
  • From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
• Re: ATM Schmidt camera
  • From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
• Re: ATM Schmidt camera
  • From: Klaus-Peter Schroeder <schroder@weizen.physik.TU-Berlin.DE>
• Re:ATM Mirror Cells and Aluminizing
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Lye (was: ATM Dirty Laundry)
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Re: Help!
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• RE: ATM Has anyone worked with membrane mirrors?
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Newbie Q. about Figuring & Looking for Articles
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM collimation, The real truth?
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Source for Fiberglass, Carbon tubes
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Source for Fiberglass, Carbon tubes
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Source for Fiberglass, Carbon tubes
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM struggling to create a strong vacuum
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Finder optics
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Copier drums and selenium (was: ATM- Free telescope tubes)
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: Copier drums and selenium (was: ATM- Free telescope tubes)
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• RE: ATM blue streaks
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM 2" focuser actual ID Diameter
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Followup: Smithy Lathe/Milling Machine
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM schmidt camera
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Silicone Glue Causes Gas?? Say it Ain't So!
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Separating Mirror & Tool?
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Kurt Hillig <khillig@Chem.LSA.UMich.Edu>
• Re: ATM I'm new, where should I start!
  • From: Kyle Barger <kbarger@haverford.edu>
• ATM Finder optics
  • From: Kyle Barger <kbarger@haverford.edu>
• Re: ATM getting feet wet
  • From: Kyle Barger <kbarger@haverford.edu>
• ATM Transporting an 18" Dob
  • From: sirius!1-105-24-0!Lee.Kirby@hermes.rdrop.com (Lee Kirby)
• ATM Newbie question...Sonotube thickness...
  • From: sirius!1-105-24-0!Lee.Kirby@hermes.rdrop.com (Lee Kirby)
• ATM Newbie question...Sonotube thickness...
  • From: sirius!1-105-24-0!Lee.Kirby@hermes.rdrop.com (Lee Kirby)
• ATM Must...avoid...helical...focuser..must...make...crayford
  • From: sirius!1-105-24-0!Lee.Kirby@hermes.rdrop.com (Lee Kirby)
• ATM Any eyepiece data available in one place?
  • From: sirius!1-105-24-0!Lee.Kirby@hermes.rdrop.com (Lee Kirby)
• Re: ATM Mirror Cells and Aluminizing
  • From: LENSES@aol.com
• Re: ATM Mirror Cells and Aluminizing
  • From: LENSES@aol.com
• Re: ATM struggling to create a strong vacuum
  • From: LENSES@aol.com
• ATM Telrad parts
  • From: LENSES@aol.com
• Re: ATM Mirror Cells and Aluminizing
  • From: lolkovic@sfu.ca
• ATM Cheap Astrositall
  • From: lolkovic@sfu.ca
• Re: ATM Mirror Cells and Aluminizing
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM - West System Epoxy and wood
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM WEST system epoxy and heat
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Any eyepiece data available in one place?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM Must...avoid...helical...focuser..
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM eyepiece selection - warning: some commercial endorsement
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Separating Mirror & Tool?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM Separating Mirror & Tool?
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• Re: ATM 2" vs. 1,25" barrel. + an eyepiece primer
  • From: Lynne and Larry Manuel <lynneandlarry.manuel@sympatico.ca>
• ATM ad: 12 micron blues
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM wood & metal & dobs & what i think about it
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM worm wheels
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM Mirror blanks in the EU
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM Duran vs. Pyrex (was: Blanks in the EU)
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• Re: ATM Mercury Ring Edge Support
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• Re: ATM Mirror Edge Support
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• ATM HOMEPAGE UPDATE - Spherometer plans
  • From: "Mag. Wolfgang Birkfellner" <wbirk@mamba.bmtp.akh-wien.ac.at>
• Re: ATM Herschelian... Meniscus Source
  • From: Malte John <malte@poweronline.net>
• ATM Homemade Ronchi Grating improved!
  • From: Malte John <malte@poweronline.net>
• Re: ATM Smalll dots on secondary
  • From: Malte John <malte@poweronline.net>
• ATM New Schiefspiegler-design from E.Herrig
  • From: Malte John <malte@poweronline.net>
• ATM First mirror, first grit!
  • From: Malte John <malte@poweronline.net>
• ATM First mirror, first grit !finished!
  • From: Malte John <malte@poweronline.net>
• ATM Khan Scope?
  • From: Manoj Sood <msood@max-net.com>
• ATM IDEA - Need practical application!
  • From: Manoj Sood <msood@max-net.com>
• ATM polish untill when?
  • From: "Marc van Gestel" <van.gestel@tip.nl>
• Re: ATM Collimation, the Truth?
  • From: Rien.Lugt@space-elec.dofn.de (Marinus van der Lugt RST16)
• Re: ATM Folloup: I Hate Dobsonians
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Folloup: I Hate Dobsonians
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Mirror Cells and Aluminizing
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Flashlights from Flowers
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi screen
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi screen
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi glue
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi vs Colllimation
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM ronchi testing
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Ronchi Testing
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM struggling to create a strong vacuum
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM low profile focuser
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Laser Collimators
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM low profile focuser
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Newport vs W-B
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Interchanging tool and blank
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Digital Sun Dial
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Tile Tools
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Digital Sun Dial
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Troublsome Focault Testers
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM rough polished surface
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Party Like It's...or Hydrogen Beer Power
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM Eyeballs and Razor Blades
  • From: Mark Cowan <cowanm@open.org>
• Re: ATM First Newtonian
  • From: Mark Cowan <cowanm@open.org>
• RE: ATM beginner mirror size.
  • From: Mark Salter <salter7@pe.net>
• ATM Enough about SPAM, Hormel doesn't need the advertising
  • From: Mark Salter <salter7@pe.net>
• ATM Equatorial Platforms
  • From: Mark Squicquero <canf_ms@access.ohio.gov>
• ATM Must...avoid...helical...focuser..must...make...crayford
  • From: mark.kaye@sympatico.ca
• ATM OM-2 for Astrophotography
  • From: mark.kaye@sympatico.ca
• ATM RE: Photocopier drums as OTA
  • From: MartyJ337@aol.com
• RE: ATM Amateur Anodizing?
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: Need info on ATM books
  • From: "Mathew A. Marulla" <atm@tiac.net>
• RE: ATM Question about telescope design(historical)
  • From: "Mathew A. Marulla" <atm@tiac.net>
• ATM RE:
  • From: "Mathew A. Marulla" <atm@tiac.net>
• ATM Olympus OM-2 and mirror weights
  • From: Matt Hughes <mhughes@qualcomm.com>
• Re: ATM Homemade Ronchi Grating! It Works!
  • From: mread@hns.com (Matt Read)
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: mread@hns.com (Matt Read)
• ATM Autoguider plans ?
  • From: mconsidine@wesleyan.edu
• Re: ATM figuring/fine grinding.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Cost of Mels guider design ( Was: I HATE Dobsonians (THAT got your attention!))
  • From: Mel Bartels <mbartels@efn.org>
• ATM suiter comments on recoating issues
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Plastic polishing lap
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM ronchi tester
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from ["Chris Westland" <westland@ust.hk>]]
  • From: Mel Bartels <mbartels@efn.org>
• ATM epoxy
  • From: Mel Bartels <mbartels@efn.org>
• Re: Diagonal Offset adjustment (was Re:ATM Collimation, the truth)
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Star Testing Scopes With CCDs
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 12 micron blues
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM beginner mirror size.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Folloup: I Hate Dobsonians
  • From: Mel Bartels <mbartels@efn.org>
• ATM 27 point support
  • From: Mel Bartels <mbartels@efn.org>
• ATM 8" binoculars
  • From: Mel Bartels <mbartels@efn.org>
• ATM mirror making in Wisconsin/Minnesota?
  • From: Mel Bartels <mbartels@efn.org>
• ATM admin note
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM beginner mirror size.
  • From: Mel Bartels <mbartels@efn.org>
• ATM TMSP
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM keck, off axis mirrors, and machining glass
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Fine grinding and Pitch laps
  • From: Mel Bartels <mbartels@efn.org>
• ATM Ronchi tester
  • From: Mel Bartels <mbartels@efn.org>
• ATM collimation
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Homemade Ronchi Grating improved
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Wood, weather, and Dobsonians.
  • From: Mel Bartels <mbartels@efn.org>
• ATM collimation
  • From: Mel Bartels <mbartels@efn.org>
• ATM coating truss tubes with fiberglass
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM collimation
  • From: Mel Bartels <mbartels@efn.org>
• ATM collimation tolerance
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM - West System Epoxy and wood
  • From: Mel Bartels <mbartels@efn.org>
• ATM MMT
  • From: Mel Bartels <mbartels@efn.org>
• ATM vibration in large metal scopes, forwarded msg from Chris Westlund
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM A sphere/Figuring
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM hardware question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Testing Long Focus Mirrors
  • From: Mel Bartels <mbartels@efn.org>
• ATM msg from Chris Westlund about graphite composite sources
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Field Derotator
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Calculating Secondary Offset
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Grind the back?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM ronchi testing
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Help me Obi-wan Kanobi
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Polishing: Viscous Pitch?
  • From: Mel Bartels <mbartels@efn.org>
• Re: SV: ATM I'm new, where should I start!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Collimation
  • From: Mel Bartels <mbartels@efn.org>
• Re: Re ATM collimation, my (long) finale
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Optical Collimation, the True Story?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Optical Collimation, the True Story?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM On Best Deformed (Star) Lap.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Backyard Observatory
  • From: Mel Bartels <mbartels@efn.org>
• ATM collimation, offsets, and CCD cameras
  • From: Mel Bartels <mbartels@efn.org>
• ATM Table Mtn Star Party
  • From: Mel Bartels <mbartels@efn.org>
• ATM comments about tensile strength of composites
  • From: Mel Bartels <mbartels@efn.org>
• ATM more on Table Mtn Star Party
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Smalll dots on secondary
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Illumination/Resolution Question
  • From: Mel Bartels <mbartels@efn.org>
• ATM QUESTIONS on mirror kit
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Illumination/Resolution Question
  • From: Mel Bartels <mbartels@efn.org>
• ATM polishing question
  • From: Mel Bartels <mbartels@efn.org>
• ATM Intro (Well, sort of...)
  • From: Mel Bartels <mbartels@efn.org>
• ATM forwarded messages
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Help with ALICE !
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Two questions please
  • From: Mel Bartels <mbartels@efn.org>
• ATM appropriate commercial scope topics, comment from the list owner
  • From: Mel Bartels <mbartels@efn.org>
• ATM a post from Harold Suiter, author of Star Testing Astronomical Instruments, on the effects of offseting a diagonal on the star test
  • From: Mel Bartels <mbartels@efn.org>
• ATM eyepiece discussions, Meade QC discussions
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Transporting an 18" Dob
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Transporting an 18" Dob
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: RCA: Astro Class wrapup (LONG)]
  • From: Mel Bartels <mbartels@efn.org>
• ATM diagonal sizing considerations for 8" f/8
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM figuring strokes
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM interpreting Ronchi test
  • From: Mel Bartels <mbartels@efn.org>
• ATM blue streaks
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eight inch F8 design
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eight inch F8 design
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM interpreting Ronchi test
  • From: Mel Bartels <mbartels@efn.org>
• ATM offset ? from Rien
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Eight inch F8 design
  • From: Mel Bartels <mbartels@efn.org>
• ATM correction to e-mail address
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Confused
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Mel Bartels <mbartels@efn.org>
• ATM what aperture, what magnification for visual detection
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Soap in CeO
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [wapwelsh@mail.island.net (Warren Paterson-Welsh)]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM rough polished surface
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM rough polished surface
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM I am polishing out and having problems
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM cerium oxide
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM First Newtonian
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM %$^%##%!! Rings won't smooth
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Separating Mirror & Tool?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Running Around in Circles!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Shipping Large Mirrors
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM just not polishing out.
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Running Around in Circles!
  • From: Mel Bartels <mbartels@efn.org>
• ATM post from Suiter re: turbulence and star tests
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM re:Optics
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 18 Point Flotation Cell
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Prescriptions?
  • From: Mel Bartels <mbartels@efn.org>
• ATM spams, mail bombing, a msg from the list owner
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Running Around in Circles!
  • From: Mel Bartels <mbartels@efn.org>
• ATM Star Testing Scopes With CCDs
  • From: michael chibnik <chibnikm@std.teradyne.com>
• Re: ATM plastic film for reflex finder?
  • From: michael chibnik <chibnikm@std.teradyne.com>
• Re: ATM Finder optics
  • From: michael chibnik <chibnikm@std.teradyne.com>
• ATM re: I hate Dobsonians......
  • From: mkoloski@orednet.org (Michael Koloski)
• ATM Some more silly questions
  • From: mkoloski@orednet.org (Michael Koloski)
• ATM Two questions please
  • From: mkoloski@orednet.org (Michael Koloski)
• re:ATM Eight inch F8 design
  • From: mkoloski@orednet.org (Michael Koloski)
• ATM Diagonal sizing thanks
  • From: mkoloski@orednet.org (Michael Koloski)
• Re: ATM Folloup: I Hate Dobsonians
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM Newbie Q. about Figuring & Looking for Articles
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM Wedge in Newt mirror?
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM getting feet wet
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM Any eyepiece data available in one place?
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM newbie rough grinding
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM Confused
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM Wooden Tube
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM help
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM More Newbie Grinding Q's
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM More Newbie Grinding Q's
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM CeO, Foucault, and grinding newbie questions
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM Prescriptions?
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM Prescriptions?
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• Re: ATM Photographing foucalt/ronchi shadows
  • From: "Michael P Lindner" <mpl@cmprime.wndev.att.com>
• ATM More on P-V vs. RMS errors
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM 8" kit received
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM D-K
  • From: Michael Peck <mpeck1@ix.netcom.com>
• ATM Telrad parts source needed
  • From: Michael Pendley <mycall@rt66.com>
• Re: ATM Herschelian Reflex Finder
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM South African Aluminizers?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM South African Aluminizers?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Newbie Q. about Figuring & Looking for Articles
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM Oh no! Not Another Magazine Thread!
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Mosby Test
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Babbitt metal source.
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Babbitt metal source.
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM struggling to create a strong vacuum
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Refractors and projection TV's
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM rough polished surface
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Lathes Should be MASSIVE
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Eyeballs and Razor Blades
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM rough polished surface
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM rough polished surface
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM CeO ain't just CeO (was rough polished surface)
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM Re: What is Going On Under the Pitch Lap?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM Re: What is Going On Under the Pitch Lap?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• ATM Re: What is Going On Under the Pitch Lap?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM re:Optics
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Re: What is Going On Under the Pitch Lap?
  • From: schmidt@coyote.csusm.edu (Michael Schmidt)
• Re: ATM Making a Telrad finder
  • From: "Mike Marchand" <marchanm@kent.net>
• Apology to the ATM List
  • From: "Mike Marchand" <marchanm@kent.net>
• Re: ATM Homemade Ronchi Grating improved
  • From: "Mike Marchand" <marchanm@kent.net>
• Re: ATM Any eyepiece data available in one place?
  • From: Mike McKee <mckee@ix.netcom.com>
• ATM RE: Anodizing Aluminum
  • From: Mike Wilson <mwilson@cdmnet.com>
• ATM How to Anodize Aluminum
  • From: Mike Wilson <mwilson@cdmnet.com>
• ATM Small Mirror/Lens Wanted
  • From: "Mike Wolfson" <mwolfson@bright.net>
• Re: ATM re:Optics
  • From: "Mike Wolfson" <mwolfson@bright.net>
• Re: ATM Olympus OM-2 and mirror weights
  • From: "Mr A Salmon"<asalmon@notes.mat.army.defence.gov.au>
• ATM High-quality, general purpose eyepieces. Which?
  • From: "N. Foldager" <nf@inet.uni-c.dk>
• ATM 2" vs. 1,25" barrel
  • From: "N. Foldager" <nf@inet.uni-c.dk>
• Re: ATM Folloup: I Hate Dobsonians
  • From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
• ATM RTV mirror bond
  • From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
• Re: ATM: Plaster Tool
  • From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
• Re: ATM More company bashing please
  • From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
• ATM Tile Tools
  • From: "Nathan L. Allen" <nathan@ebs330.eb.uah.edu>
• Re ATM Herschelian Reflex Finder
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Collimation, the Truth?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM collimation
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Homemade Reflex Sight Rings
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Collimation, the Truth?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Collimating Newtonians
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Collimating Newtonians
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Optical Path Lengths For Star Diagonals
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Collimation question
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Collimation question
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Collimating Newtonians
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re ATM collimation, my (long) finale
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re ATM Collimating Newtonians with Laser, 4way
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM [Fwd: RCA: Astro Class wrapup (LONG)]
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Best black paint to repaint Starfinder
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Optical adhesives: Types? Procedures? Sources?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Re: Collimating Newtonians with Laser
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Blanks in EU
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM testing and refiguring existing 6" F5 mirror.......-Reply
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Confused
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM barlows, magnification
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM barlows, magnification and also averted vision
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: (Fwd) Re: ATM barlows, magnification and also averted vision
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Re: Collimating Newtonians with Laser
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Non-rotating Helical focuser
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM I'm new, where should I start!
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM Dobsonian for visual/photo use
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• Need info on ATM books
  • From: "Olle Eriksson" <olle.eriksson@norrkoping.mail.telia.com>
• ATM 2" focuser actual ID Diameter
  • From: Patrick & Bronwyn Scharf <scharfpb@eis.net.au>
• ATM Lucite for Dob bearings
  • From: "Patrick Brands" <pbrands@pacbell.net>
• Re: ATM Astronomy & S&T Indices
  • From: Paul & Meg Noah <noah024@ibm.net>
• Re: ATM Amateur Anodizing?
  • From: "Paul Alsing" <palsing@pre.com>
• Re: ATM Prescriptions?
  • From: "Paul Alsing" <palsing@pre.com>
• Re: ATM what mount for fixed observatory
  • From: Paul Gonzalez <pgonzalez@monmouth.com>
• ATM low profile focuser
  • From: Paul Weiler <kwpw@crosslink.com>
• ATM newt specs
  • From: Paul Weiler <kwpw@crosslink.com>
• ATM Mason Dixon Star Party
  • From: Paul Weiler <kwpw@crosslink.com>
• ATM test
  • From: Paul Weiler <kwpw@crosslink.com>
• ATM Re: atm-digest V1 #770
  • From: PaulD60258@aol.com
• ATM Newbie question...Sonotube thickness...
  • From: Pedro <pbraganc@mustang.uwo.ca>
• ATM Dobsonian mount height
  • From: Pedro <pbraganc@mustang.uwo.ca>
• ATM Wooden Tube
  • From: Pedro <pbraganc@mustang.uwo.ca>
• ATM schmidt camera
  • From: Peter Abrahams <telscope@europa.com>
• Re: ATM schmidt camera
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Small Mirror/Lens Wanted
  • From: notpete@scn.org (Peter Hirtle)
• ATM beginner mirror size.
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• RE: ATM Pipe Fittings
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• RE: ATM beginner mirror size.
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• RE: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• RE: ATM Two questions please
  • From: "Peter J. Thomas" <pjthomas@snet.net>
• ATM anodizing
  • From: malon@marilyn.uochb.cas.cz (Petr Malon)
• ATM mercury
  • From: malon@marilyn.uochb.cas.cz (Petr Malon)
• ATM maestronix eureka 2001
  • From: Pierrejean PALLEZ <pierrejean.pallez@span.ch>
• ATM RTMC Testing Workshop
  • From: Randy Johnson <randyj@nwlink.com>
• ATM Bullet Proof Scope/Focuser For Science Museum Display
  • From: Randy Johnson <randyj@nwlink.com>
• ATM lit led contest
  • From: Redwad <redwad@telebyte.net>
• ATM Led Flashlight Contest
  • From: Redwad <redwad@telebyte.net>
• Re: ATM Collimating Newtonians
  • From: Redwad <redwad@telebyte.net>
• ATM Red led flashlight
  • From: Redwad <redwad@telebyte.net>
• Re: ATM Transporting an 18" Dob
  • From: Redwad <redwad@telebyte.net>
• ATM Red led flashlight
  • From: Redwad <redwad@telebyte.net>
• ATM Red led flashlight
  • From: Redwad <redwad@telebyte.net>
• ATM Prescriptions?
  • From: Redwad <redwad@telebyte.net>
• ATM SPIE book sale
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Lens making texts?
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• RE: ATM Tile Tools
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Full Moon Collimation
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Mirrors testing mirrors
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Eyeballs and Razor Blades
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM On Gregorian Design Parameters.
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Drawing Exchange Format?
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• ATM Ronchi tester.
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• ATM First light on thin tabletop mirror
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• ATM QuickCam on a telescope
  • From: Ricardo Dunna <rdunna@apit.furnas.gov.br>
• ATM getting feet wet
  • From: Richard <sewmotn@whitemtns.com>
• ATM Thanks! And more help, please?
  • From: Richard <sewmotn@whitemtns.com>
• ATM plaster steel-washer tool
  • From: Richard <sewmotn@whitemtns.com>
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: "Richard H. Jarnagin" <afn31987@afn.org>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Richard H. Jarnagin" <afn31987@afn.org>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Richard H. Jarnagin" <afn31987@afn.org>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Richard H. Jarnagin" <afn31987@afn.org>
• Re: Diagonal Offset adjustment (was Re:ATM Collimation, the truth)
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Newtonian Design
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Binocular Telescope
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Rotating Cradle Rings
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM collimation
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM autocollimator
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: Re[2]: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM (no subject)
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Fwd: Re: SV: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Collimation - Mechanical Alignment
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Collimating Newtonians
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Illumination/Resolution Question
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• Re: ATM Dobsonian for visual/photo use
  • From: "Richard Keppler" <rkeppler@telusplanet.net>
• ATM Controlling Telrad LED reticle
  • From: rmp@utxvms.cc.utexas.edu (Richard Petty)
• ATM Controlling Telrad LED reticle
  • From: rmp@utxvms.cc.utexas.edu (Richard Petty)
• ATM Spherometer Improvements
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Dob Driver
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM undercorrection
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM what mount for fixed observatory
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Re: atm pipe fittings
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM I HATE Dobsonians (THAT got your attention!)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM beginner mirror size.
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Astronomy & S&T Indices
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Re: atm pipe fittings
  • From: Richard Schwartz <richas@idt.net>
• Re: SV: ATM Collimating Newtonians
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Optical Collimation, the True Story?
  • From: Richard Schwartz <richas@idt.net>
• ATM Formula for Diagonal Offset
  • From: Richard Schwartz <richas@idt.net>
• ATM Can a Ronchi replace a micrometer?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM polish untill when?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM about Cassegrain
  • From: Richard Schwartz <richas@idt.net>
• ATM Foucault Tester: use of Moire patterns in place of micrometer
  • From: Richard Schwartz <richas@idt.net>
• ATM Collimation with Diagonal Centered on Tube Axis
  • From: Richard Schwartz <richas@idt.net>
• ATM Pitch Bansihed by Wife-- No Way!
  • From: Richard Schwartz <richas@idt.net>
• ATM Digital Sun Dial
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Lens making texts?
  • From: Richard Schwartz <richas@idt.net>
• ATM Knobs, 50 graduations, 2" diameter
  • From: Richard Schwartz <richas@idt.net>
• ATM [Fwd: Returned mail: User unknown]
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Meade report
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Two questions please
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Interchanging tool and blank
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM I am polishing out and having problems
  • From: Richard Schwartz <richas@idt.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Richard Schwartz <richas@idt.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Richard Schwartz <richas@idt.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Ultimate Power Supply: Laser Collimation
  • From: Richard Schwartz <richas@idt.net>
• ATM What is Going On Under the Pitch Lap?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM On Gregorian Design Parameters.
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM How Polishing Works
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM More company bashing please
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM How Polishing Works
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM On Gregorian Design Parameters.
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Flashlights from Flowers
  • From: rwalker@flint.org (richard walker)
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: rwalker@flint.org (richard walker)
• Re: ATM Confused
  • From: rwalker@flint.org (richard walker)
• ATM SPAM and Mercury
  • From: rwalker@flint.org (richard walker)
• ATM old new pitch
  • From: richas@pacbell.net
• ATM Luggage and diagonal sizes
  • From: richas@pacbell.net
• ATM polishing advice
  • From: richas@pacbell.net
• ATM polishing problems II
  • From: richas@pacbell.net
• ATM interpreting Ronchi test
  • From: richas@pacbell.net
• ATM polishing update
  • From: richas@pacbell.net
• ATM %$^%##%!! Rings won't smooth
  • From: richas@pacbell.net
• ATM It's done! (was %$@$%#$% Rings)
  • From: richas@pacbell.net
• Re: ATM - West System Epoxy and wood
  • From: "Rick" <acrohead@ix.netcom.com>
• Re: ATM Wooden Tube (fwd)
  • From: "Rick" <acrohead@ix.netcom.com>
• ATM Has anyone worked with membrane mirrors?
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM Has anyone worked with membrane mirrors?
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM Vibration in Large Metal Scopes
  • From: Rick Nelson <richard@netexp.net>
• ATM Experiment #1 and questions
  • From: Rick Nelson <richard@netexp.net>
• ATM Re: Experiment #1 and questions
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM FREE TELESCOPE TUBES!
  • From: Rick Nelson <richard@netexp.net>
• ATM struggling to create a strong vacuum
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM struggling to create a strong vacuum
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Rick Nelson <richard@netexp.net>
• ATM Liquid Mirror Technology Web Site
  • From: Rick Nelson <richard@netexp.net>
• ATM Re: Liquid Mirror Technology Web Site
  • From: Rick Nelson <richard@netexp.net>
• Re: Alternative mirror technologies, WAS ATM Liquid-mirror telescopes (fwd)
  • From: Rick Nelson <richard@netexp.net>
• Re: ATM Re: atm pipe fittings
  • From: rhill@LPL.Arizona.EDU (Rik Hill)
• Re: ATM Finder optics
  • From: rhill@LPL.Arizona.EDU (Rik Hill)
• Re: ATM Finder optics
  • From: rhill@LPL.Arizona.EDU (Rik Hill)
• Re: ATM COST: Big Dob vs. Just the Optics?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Folloup: I Hate "wooden" Dobsonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Collimation, the Truth?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• ATM Optical Software
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM keck, off axis mirrors, and machining glass
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM keck, off axis mirrors, and machining glass
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Vibration in Large Metal Scopes
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Wood, weather, and Dobsonians.
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM scepticism
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM 8" kit received
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM vibration suppression
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Grind the back?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Babbitt metal source.
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Optical Collimation, the True Story?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Babbitt metal source.
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Babbitt metal source.
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Re: Collimating Newtonians with Laser
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: Fwd: Re: SV: ATM Collimating Newtonians
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM (no subject) Dot
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Vibration Quick Fix?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Mason Dixon Star Party
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Lens making texts?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM FREE TELESCOPE TUBES!
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Meade
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Meade
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Re: correction
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Transporting an 18" Dob
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM a post from Harold Suiter,author of Star Testing Astronomical Instruments,on the effects of offseting a diagonal on the star test
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Liquid mirrors
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Re: correction
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Re: Collimating Newtonians with Laser
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM polishing advice
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM interpreting Ronchi test
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Confused
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM offset ? from Rien
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Followup: Smithy Lathe/Milling Machine
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Full Moon Collimation
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM About Smithy Clones
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Schmidt Camera
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Schmidt Camera
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Schmidt Camera
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Mercury Ring Edge Support
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Schmidt Camera
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Mercury Ring Edge Support
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM First Newtonian
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Eyeballs and Razor Blades
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• RE: ATM Non-rotating Helical focuser
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Pitch tool: tick enough?
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Star test question
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Star test question
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM: Sources for Autocollimators (fwd)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Running Around in Circles!
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: PFAFF2@delphi.com (Robert C. Pfaff)
• Re: ATM Homemade Ronchi Grating improved
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM BB Gun Reflex Site vs. Orion EZFinder
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Focusing question
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Grind the back?
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM I'm new, where should I start!
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM polish untill when?
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Meade focuser and tube strap replacements?
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Lens making texts?
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM polishing advice
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM interpreting Ronchi test
  • From: Robert Duvall <RDuvall@pixworks.com>
• ATM Re: Polishing Stroke Clarification
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM interpreting Ronchi test
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Must...avoid...helical...focuser..must...make...crayford
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM Confused
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM homebrew Foucault tester
  • From: Robert Duvall <RDuvall@pixworks.com>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: Robert Duvall <forcefive@earthlink.net>
• ATM Backyard Observatory
  • From: Robert H HANSEN <wombat@netwit.net.au>
• Re: ATM Plastic polishing lap
  • From: "Robert S. Horton" <rhorton@btv.ibm.com>
• Re: ATM truss tube coating
  • From: Roderick Darroch Elliott <rellio@po-box.mcgill.ca>
• Re: ATM - West System Epoxy and wood
  • From: Roderick Darroch Elliott <rellio@po-box.mcgill.ca>
• Re: ATM polishing microfacets
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM I'm new, where should I start!
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• Re: ATM rough polished surface
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Running Around in Circles!
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• Re: ATM scratches
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• Re: ATM Tumble Polish
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• Re: ATM scratches
  • From: ceragioli@UH.EDU (Roger C. Ceragioli)
• ATM Liquid-mirror telescopes
  • From: rsinnott@skypub.com
• Re: Alternative mirror technologies, WAS ATM Liquid-mirrortelescopes
  • From: rsinnott@skypub.com
• ATM ronchi tester
  • From: Scott <smarsh@mail.geocities.com>
• ATM Ronchi tester.
  • From: Scott <smarsh@mail.geocities.com>
• ATM polishing microfacets
  • From: Scott <smarsh@mail.geocities.com>
• ATM pitch lap, my second
  • From: Scott <smarsh@mail.geocities.com>
• ATM anodizing
  • From: Scott Gordon <sgordon@maed.hrl.hac.com>
• ATM composite tubes
  • From: Scott Gordon <sgordon@maed.hrl.hac.com>
• ATM I am polishing out and having problems
  • From: Scott Marsh <smarsh@mail.geocities.com>
• ATM just not polishing out.
  • From: Scott Marsh <smarsh@mail.geocities.com>
• ATM sleeks
  • From: Scott Marsh <smarsh@mail.geocities.com>
• Re:ATM Mirror Cells and Aluminizing
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM Folloup: I Hate Dobsonians
  • From: Scott Rychnovsky <srychnov@uci.edu>
• ATM Fine grinding and Pitch laps
  • From: Scott Rychnovsky <srychnov@uci.edu>
• ATM Polishing: Viscous Pitch?
  • From: Scott Rychnovsky <srychnov@uci.edu>
• ATM Re: Polishing Stroke Clarification
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM Where can I find Gugolz 64?
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM Re: Polishing Stroke Clarification
  • From: Scott Rychnovsky <srychnov@uci.edu>
• No Subject
  • From: Scott Rychnovsky <srychnov@uci.edu>
• ATM When is a lap too thin?
  • From: Scott Rychnovsky <srychnov@uci.edu>
• Re: ATM Grease and Optics
  • From: Scott Rychnovsky <srychnov@uci.edu>
• FW: ATM Folloup: I Hate Dobsonians
  • From: Sean Scott <sscott@prxm.com>
• RE: ATM scepticism
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM Mirror protection
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM Manual Slow Motion Ctrls for Pipe Fitting Eq Mount
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM More company bashing please
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM Newport Pre-generated Mirror Blanks
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM Confused
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM Cell Query
  • From: Sean Scott <sscott@prxm.com>
• FW: Alternative mirror technologies, WAS ATM Liquid-mirror tel escopes
  • From: Sean Scott <sscott@prxm.com>
• RE: ATM Non-rotating Helical focuser
  • From: Sean Scott <sscott@prxm.com>
• FW: ATM rough polished surface
  • From: Sean Scott <sscott@prxm.com>
• Re: ATM Mirror Cells and Aluminizing
  • From: Sherry Trahan <strahan@umd5.umd.edu>
• Re:ATM Mirror Cells and Aluminizing
  • From: Spencer Roedder <roedder@roedder.com>
• Re: ATM Graphite fishing poles uses as trusses.
  • From: Spencer Roedder <roedder@roedder.com>
• Re: ATM Source for Fiberglass, Carbon tubes
  • From: Spencer Roedder <roedder@roedder.com>
• Re: SV: ATM Collimating Newtonians
  • From: Spencer Roedder <roedder@roedder.com>
• Re: ATM (no subject)--egg shape
  • From: Spencer Roedder <roedder@roedder.com>
• RE: ATM Two questions please
  • From: Spencer Roedder <roedder@roedder.com>
• ATM How to make Ronchi screen?
  • From: Stefan Beck <100547.256@compuserve.com>
• ATM Tips against stucking tool
  • From: Stefan Beck <100547.256@compuserve.com>
• Re: ATM 27 point support
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Mirror Cells and Aluminizing
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Herschelian Reflex Finder update
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Anatomy of a failed experiment
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Some more silly questions
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Question about telescope design(historical)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM UK -- Motors, etc.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM polishing microfacets
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Luggage and diagonal sizes
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM plastic film for reflex finder?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Newbie Question...Microfacets, What are they?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM plastic film for reflex finder?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Sanding rim and back of mirror
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Optical Path Lengths For Star Diagonals
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM plastic film for reflex finder?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Finder optics
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Finder optics
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM QUESTIONS on mirror kit
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Novice Lap Question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM (no subject)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Lens making texts?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM: Plaster Tool
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Optical adhesives: Types? Procedures? Sources?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: Need info on ATM books
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM interpreting Ronchi test
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Combating spam and unsolicited junk email.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Combating spam and unsolicited junk email.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Question about telescope design(historical)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Wooden Tube (fwd)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Non-rotating Helical focuser
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Separating Mirror & Tool?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Separating Mirror & Tool?
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Basic optics (was:ATM Star test question)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Separating Mirror & Tool? (fwd)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Yerkes Photos
  • From: Steve Bell <sb635@delphi.com>
• Re: Diagonal Offset adjustment (was Re:ATM Collimation, the truth)
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Newtonian Design
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation, the Truth?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Rotating Cradle Rings
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimating Newtonians
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM collimation
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM vibration suppression
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM collimation
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimating Newtonians
  • From: Steve Bell <sb635@delphi.com>
• ATM Optical Collimation, the True Story?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Optical Collimation, the True Story?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Optical Collimation, the True Story?
  • From: Steve Bell <sb635@delphi.com>
• ATM Re: Collimation
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Collimation (again)
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• ATM Collimation, the Final Story?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Meade focuser and tube strap replacements?
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Secondary Mirrors
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Offset on Commercial Scopes
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM a post from Harold Suiter,author of Star Testing Astronomical Instruments,on the effects of offseting a diagonal on the star test
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM offset ? from Rien
  • From: Steve Bell <sb635@delphi.com>
• ATM Newport Pre-generated Mirror Blanks
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Full Moon Collimation
  • From: Steve Bell <sb635@delphi.com>
• ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: SV: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM First Newtonian
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Non-rotating Helical focuser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: Steve Bell <sb635@delphi.com>
• Re: ATM First Newtonian
  • From: Steve Bell <sb635@delphi.com>
• RE: ATM Secondary Mirrors
  • From: Steve Follett <sfollett@wco.com>
• ATM Squaring focuser to tube
  • From: Steve Scampini <scampini@hp-mpg.an.hp.com>
• ATM Focuser Squaring Question
  • From: Steve Scampini <scampini@hp-mpg.an.hp.com>
• ATM Drill Presses/Drilling
  • From: Steve Scampini <scampini@hp-mpg.an.hp.com>
• ATM I'm new, where should I start!
  • From: "stewart" <daniel@gateway.surfcity.nb.ca>
• No Subject
  • From: "stewart" <daniel@gateway.surfcity.nb.ca>
• No Subject
  • From: "stewart" <daniel@gateway.surfcity.nb.ca>
• Re: ATM Pipe Thread Mounts
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• ATM Dotting the Secondary
  • From: Sue&Alan French <Sue_and_Alan_French@compuserve.com>
• Re: ATM Re: atm pipe fittings
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Vibration in Large Metal Scopes
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Flashlights from Flowers
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Luggage and diagonal sizes
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM plastic film for reflex finder?
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Experiment #1 and questions
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM downloading VIGN9502.zip
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM struggling to create a strong vacuum
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM struggling to create a strong vacuum
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM FREE TELESCOPE TUBES!
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Two questions please
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM black anodizing dye
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Bullet Proof Scope/Focuser For Science Museum Display
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Torus CC04
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM barlows, magnification
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• Re: ATM Mercury: from the liquid mirror thread
  • From: Suzanne Sarlette/Gerald Pearson <suegerry@mut1.muscanet.com>
• ATM Re:new mounts for dept.store scopes
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• Re: ATM Any eyepiece data available in one place?
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• ATM Re:Cell Query
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• Re: ATM Olympus OM-2 and mirror weights
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• Re: ATM Olympus oops
  • From: tmasnyk@surgery.bsd.uchicago.edu (Taras Masnyk)
• ATM BB gun Reflex sight vs. Orion exfinder
  • From: tasimmons@CCGATE.HAC.COM
• Re: ATM How Polishing Works
  • From: Ted Viens <drtedv@smart1.net>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "Thomas Roginski" <owl1@postoffice.ptd.net>
• ATM Testing Results 8" Old Coulter Mirror
  • From: thomrob@iamerica.net
• ATM Re: Help!
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• ATM Quoting other messages
  • From: Tim Poulsen <Tim_Poulsen@zd.com>
• Re: ATM Idea: Computer SAYS Object Descriptions
  • From: Tom Cathey <K1JJ@snet.net>
• ATM Computer Voice Narration of Objects- Update
  • From: Tom Cathey <K1JJ@snet.net>
• ATM Re: Speech and Scopes - NEW INFO
  • From: Tom Cathey <K1JJ@snet.net>
• ATM New 6" F4 page
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM Dobsonian for visual/photo use
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM appropriate commercial scope topics, comment from the list owner
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM tex results - what do they mean?
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM plaster steel-washer tool
  • From: Tom Coan <tcoan@teleport.com>
• Re: ATM Folloup: I Hate Dobsonians
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• ATM Smalll dots on secondary
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• ATM auto-collimating lasers
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Transporting an 18" Dob
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• ATM Full Moon Collimation
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM Re: Collimating Newtonians with Laser
  • From: "Tom Glinos, x4302" <tg@utstat.toronto.edu>
• Re: ATM pitch lap, my second
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Finder Lenses
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM figuring strokes
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Dobsonian for visual/photo use
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Polishing Stroke Clarification
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM newbie rough grinding
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Polishing Stroke Clarification
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Full Moon Collimation
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM eyepiece barrels? (1.25", filter threaded)
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Schmidt Camera
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM schmidt camera
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Tripods - build your own!
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Re: Collimating Newtonians with Laser
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM telescope plans
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Non-rotating Helical focuser
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Non-rotating Helical focuser
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Running Around in Circles!
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Small Mirror/Lens Wanted
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Optics
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM Running Around in Circles!
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• Re: ATM CeO, Foucault, and grinding newbie questions
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM Photographing foucalt/ronchi shadows
  • From: "Tom Krajci" <krajcit@det5wg57.barksdale.af.mil>
• ATM figuring strokes
  • From: Tom Wehn <tomwehn@en.com>
• Re: ATM 12 micron blues
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Folloup: I Hate "wooden" Dobsonians
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Graphite fishing poles uses as trusses.
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM A newbie's first success
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Re: Collimating Newtonians with Laser
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Finder optics
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Re: Meade
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Equatorial Platforms?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Where can I find Gugolz 64?
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Must...avoid...helical...focuser..must...make...crayford
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM Tile Tools
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: Tom.Stock@gsbsc.gensig.com
• Re: ATM Red led flashlight
  • From: Tom.Stock@gsbsc.gensig.com
• Re[2]: ATM FW: SPAM - Equipment financing for your business.
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Standard Handbook for Telescope Making
  • From: Tom.Stock@gsbsc.gensig.com
• ATM Pitch laps
  • From: Tracy Wilson <tracy@NETIME.COM>
• ATM Telescope Tube Finish
  • From: U Wish <pbraganc@mustang.uwo.ca>
• Re: ATM 12 micron blues
  • From: UC007@aol.com
• Re: ATM How to make Ronchi screen?
  • From: UC007@aol.com
• Re: ATM Has anyone worked with membrane mirrors?
  • From: UC007@aol.com
• Re: ATM Wood, weather, and Dobsonians.
  • From: UC007@aol.com
• Re: ATM fiberglass coverings
  • From: UC007@aol.com
• Re: ATM Ronchi glue
  • From: UC007@aol.com
• ATM Testing Long Focus Mirrors
  • From: UC007@aol.com
• Re: SV: ATM Collimating Newtonians
  • From: UC007@aol.com
• Re: SV: ATM Collimating Newtonians with Laser for Greg
  • From: UC007@aol.com
• Re: ATM polish untill when?
  • From: UC007@aol.com
• Re: ATM Re: Collimating Newtonians with Laser
  • From: UC007@aol.com
• Re: ATM Re: Collimating Newtonians with Laser
  • From: UC007@aol.com
• Re: ATM Laser Collimators
  • From: UC007@aol.com
• ATM Making Pitch Laps
  • From: UC007@aol.com
• ATM Trashing Companies
  • From: UC007@aol.com
• Re: ATM rough polished surface
  • From: UC007@aol.com
• Re: ATM Re: Collimating Newtonians with Laser
  • From: UC007@aol.com
• Re: ATM %$^%##%!! Rings won't smooth
  • From: UC007@aol.com
• Re: ATM How Polishing Works
  • From: UC007@aol.com
• ATM Fw: Top 5 Reasons Why Computers Must be Male
  • From: "Wes Weber" <wesw@netcom.com>
• Re:ATM Mirror Cells and Aluminizing
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM RTV mirror bond
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM blue streaks
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM FW: SPAM - Equipment financing for your business.
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM CeO ain't just CeO (was rough polished surface)
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM More company bashing please
  • From: "William H. Shamblin,Jr." <wshamblin@ac.net>
• Re: ATM Finder optics
  • From: Woody_Medler@ucamp.com
• Re: ATM Univ Optics???
  • From: Woody_Medler@ucamp.com
• ATM 6" f/6
  • From: Yvan Blom <yvan@belnet.be>
• ATM homebrew Foucault tester
  • From: Yvan Blom <yvan@belnet.be>
• Re: ATM homebrew Foucault tester
  • From: Yvan Blom <yvan@belnet.be>