Re: [ATM] correction -+

["Jerry" <wa4guu@verizon.net>]

What diameter?

-----Original Message-----
From: atm-bounces@atmlist.net [mailto:atm-bounces@atmlist.net] On Behalf Of
KR
Sent: Friday, June 22, 2007 10:37 PM
To: atm@atmlist.net
Subject: [ATM] correction -+

Hello list,

    Twice I've asked myself, what value of correction is on the level of a 
RMS value of 6, a PV of 1/13, strel .988?
I don't recall any discussion on the matter. When you approach very good 
readings, the temptation arises; I can't make it around the barrel again 
without loosing good Foucault results, so the good-enough becomes relevant.
    This is plate glass, f/6. If I do a set of readings in the morning when 
it is warming up, they are different than an evening set when cooling. I 
will continue to average readings, so far -1.06, but they have ranged 
from -1.065 down to -1.06 (not really an average). If plate glass gives such

wide ranging results, I ask what value of correction weighs in with good 
Foucault readings?
    Star test will tell in the end. Does anyone have thoughts on this?
Thanks   KMR 

_______________________________________________
ATM mailing list http://www.atmlist.net/

_______________________________________________
ATM mailing list http://www.atmlist.net/