Re: [ATM] need ides to reinforce my struts

[Steve Vegos <astro@rvi.net>]

I see.  How about shaving some of the material from the 'feet' of the 
conduit clamps where they seat up against the mirror box?  That ought to 
make the clamps tighten up.

Steve
Oregon

peter wrote:
> Just below the inside surface of the holes in the mirrorr box mount under
> each hole a "sadlle-clamp" as used to mount 1.25" electrical tubing, with two
> small bolts and wingnuts on the outside.
> 
> After inserting the tubes and screwing in place, conecting the secondary
> ring tighten the wingnuts and all will be as solid as possible.
> 
> Making sleeves will make it likely impossible to screw the post into the
> sockets, and yet get it all tight.
> 
>     Peter 
> 
>  
> 
> -------Original Message-------
> 
I hate to mention this, but beer cans make good, thin shim material.
Steve
Oregon
_______________________________________________
ATM mailing list http://www.atmlist.net/