[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] need ides to reinforce my struts

To: <atm@atmlist.net>
Subject: Re: [ATM] need ides to reinforce my struts
From: "John Sherman" <atm@johnspics.com>
Date: Wed, 21 Jun 2006 17:10:11 -0400
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Reply-to: atm@johnspics.com
Sender: atm-bounces@atmlist.net

RP,


>Any ideas where I can an get the sleeves, how close to the ID of 
>the sleeves can be to 1.25 (the OD of the poles). 

Ideally, there should be no space at all. You can experiment by making 
some small wedges out of wood or something to fill the space. Then, you
could contemplate my original suggestion to just add a couple diagonal
poles to the original structure.

John




_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] Astrosystems Telekits
Next by Author: Re: [ATM] Small Dob truss question
Previous by thread: Re: [ATM] need ides to reinforce my struts
Next by thread: Re: [ATM] need ides to reinforce my struts
Index(es):
- Author
- Thread