[ATM] Applying Protective Coatings

[Preston Engebretson <thecount@flash.net>]

Peter, James and Ken...

Thanks, I will proceed with the purchase of the Aluminum chamber...

It has a front door and should be able to coat a mirror of 26" diameter
in a vertical position and a lense in the overhead  of the chamber of 24"
diameter...

I can look at differant fixtures for lense or mirror holding after it 
arrives...
as I have most all of the other bits and pieces...

I obtained a very nice 20" diameter base in SS 1" thick with about 18
pass throughs that Lesker Co. list for about $200 each and the Ebay
price for the base shipped to me was $120...Great Find...

Thanks to the VacuumX group for peeking my interest...

Best Regards,

Preston

_______________________________________________
ATM mailing list http://www.atmlist.net/