Amateur Telescope Makers (ATM) Archive for JUN06 - by author

• Thread Index

• [ATM] OSLO ASPHERIC FORMULA
  • From: "Alfredo Rainho Neves" <aneves@snowsoft.biz>
• [ATM] Digital Setting Circles
  • From: "andrew podmore" <andypod@ntlworld.com>
• [ATM] test
  • From: "andrew podmore" <andypod@ntlworld.com>
• [ATM] ATM: Big, accurate, setting circles.
  • From: "andrew podmore" <andypod@ntlworld.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Baffles
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Reflectivity of polished silicon
  • From: Anthony Stillman <atmer@flash.net>
• [ATM] Bronze reflectivity
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Bronze reflectivity
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Bronze reflectivity
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Bronze reflectivity
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] water drive
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Baffles
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Baffles
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Baffles
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Baffles
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Baffles
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] wire spiders
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: <atm@hudler.org>
• Re: [ATM] portland cement; grind. etc.
  • From: <atm@hudler.org>
• Re: [ATM] water drive
  • From: "ATM_jcbj" <atm_jcbj@bellsouth.net>
• Re: [ATM] water drive
  • From: "ATM_jcbj" <atm_jcbj@bellsouth.net>
• [ATM] aluminum poles
  • From: Bill <astronutski@yahoo.com>
• [ATM] Free Zerodur
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Free Zerodur
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: Bill Marriott <bmarriott@pacbell.net>
• Re: [ATM] Gerry Logan's photos
  • From: Bill Marriott <bmarriott@pacbell.net>
• [ATM] Pyrex availability
  • From: Bill Marriott <bmarriott@pacbell.net>
• [ATM] Removing perforated center
  • From: Bill Marriott <bmarriott@pacbell.net>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• [ATM] CCD Slit Test Simplified
  • From: Bill Thomas <bthomas32000@yahoo.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Bob Lombardi <boblombardi@cfl.rr.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Figuring question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Dumb Question: how to measure a...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Trepanning Page
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Dumb Question: how to measure a...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Dumb Question: how to measure a...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] final formatting of Logan photos
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Gerry Logan's photos
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] grit disposal
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] grit disposal
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Strip planked telescope tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Strip planked telescope tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Strip planked telescope tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Removing perforated center
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Strip planked telescope tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] BAFFLES
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Baffles
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Small Dob truss question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Effects of a too small secondary
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Width of Dome Slit?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] CAmpfires
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] CAmpfires
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Coating not Adhering on Glass
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: creator <creator@subarcsec.com>
• Re: [ATM] water drive
  • From: creator <creator@subarcsec.com>
• [ATM] Fluid Drive Rate Regulation Ideas
  • From: creator <creator@subarcsec.com>
• Re: [ATM] PPPP
  • From: creator <creator@subarcsec.com>
• Re: [ATM] Width of Dome Slit?
  • From: creator <creator@subarcsec.com>
• Re: [ATM] ATM Digest, Vol 30, Issue 4
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] ATM Digest, Vol 30, Issue 8
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] WAS: RE: ATM Digest, Vol 30, Issue 21; IS: FEA models of test stand induced deflections
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] WAS: RE: ATM Digest, Vol 30, Issue 21; IS: FEA models of test stand induced deflections
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] water drive
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] wire spiders
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] has any here made an inexpensive filter slide for 1.25 " filters on a DOB?
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] metal surface on a ground ring?
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] grit disposal
  • From: "David Margrave" <david.margrave@gmail.com>
• [ATM] How should I finish polishing this 8" F/6?
  • From: davidtrumble@comcast.net
• Re: [ATM] has any here made an inexpensive filter slide for 1.25 " filters on a DOB?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] OSLO ASPHERIC FORMULA
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] OSLO ASPHERIC FORMULA
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Bronze reflectivity
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Bronze reflectivity
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] water drive
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] water drive
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] water drive
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] water drive: correction
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] {Spam?} Re: Unique New Equatorial Platform Design
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] water drive
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] PPPP
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Fluid Drive Rate Regulation Ideas
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Baffles
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Baffles
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] portland cement; grind. etc.
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] water drive
  • From: donald.good@comcast.net
• Re: [ATM] Unique New Equatorial Platform Design
  • From: donald.good@comcast.net
• Re: [ATM] water drive
  • From: donald.good@comcast.net
• Re: [ATM] Got Stiction?
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Turcite COF
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] ATM Fluid Drive Rate Regulation Ideas
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] ATM Fluid Drive Rate Regulation Ideas
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: DU <desiredusername@gmail.com>
• Re: [ATM] water drive
  • From: DU <desiredusername@gmail.com>
• Re: [ATM] water drive
  • From: DU <desiredusername@gmail.com>
• Re: [ATM] portland cement; grind. etc.
  • From: "dune" <dune@shadow.freeserve.co.uk>
• Re: [ATM] portland cement; grind. etc.
  • From: "dune" <dune@shadow.freeserve.co.uk>
• [ATM] Astrosystems Telekits
  • From: edwski@comcast.net
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: fabio@voreas.com
• [ATM] Fwd: Re: Got Stiction?
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Got Stiction?
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Got Stiction?
  • From: GARY FUCHS <gary@rcn.com>
• [ATM] Fwd: Re: final formatting of Logan photos
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] water drive
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] water drive
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] water drive
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] water drive
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] water drive: correction
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Strip planked telescope tube
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Advice on Solar scopes/observation
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Advice on Solar scopes/observation
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] has any here made an inexpensive filter slide for 1.25 " filters on a DOB?
  • From: Gernot Stenz <stenzg@in.tum.de>
• Re: [ATM] The new Equitorial mount, aka, water drive, ball bearing , masterpiece
  • From: GF <gary@rcn.com>
• Re: [ATM] Strip planked telescope tube
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] rutten & van venrooij - proper pronunciation
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Joe Martin's Mirrors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Joe Martin's Mirrors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] CAmpfires
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] CAmpfires
  • From: hermit <hermit@outofoptions.org>
• [ATM] Trepanning Page
  • From: IAPDK@ADMIN.DRAKE.EDU
• [ATM] water drive
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Applying Protective Coatings
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] rutten & van venrooij - proper pronunciation
  • From: "Jan van gastel" <jhm.vangastel@wanadoo.nl>
• [ATM] wire spiders
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• [ATM] Applying Protective Coatings
  • From: Jason Hissong <jhissong@gmail.com>
• Re: [ATM] Applying Protective Coatings
  • From: Jason Hissong <jhissong@gmail.com>
• [ATM] Mirror Generation Question
  • From: Jason Lehmann <jtravel@bellsouth.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] water drive
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] water drive
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] water drive
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fluid Drive Rate Regulation Ideas
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] ATM Digest, Vol 30, Issue 21
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Joe <nss@mwt.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Joe <nss@mwt.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Joe <nss@mwt.net>
• [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• [ATM] BAFFLES
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• Re: [ATM] Baffles
  • From: johncdeitz@comcast.net
• [ATM] CAmpfires
  • From: johncdeitz@comcast.net
• Re: [ATM] CAmpfires
  • From: johncdeitz@comcast.net
• Re: [ATM] CAmpfires
  • From: johncdeitz@comcast.net
• Re: [ATM] Coating not Adhering on Glass
  • From: johncdeitz@comcast.net
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Figuring question
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] telescopes by Gerry Logan
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] advice on making a shroud for a 10" DOB
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] 50 mm FL 1 1/4 " eyepiece
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Astrosystems Telekits
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] need ides to reinforce my struts
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Small Dob truss question
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Effects of a too small secondary
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] metal surface on a ground ring?
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] need ides to reinforce my struts
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Figuring question
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Applying Protective Coatings
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PPPP
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] need ides to reinforce my struts
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PPPP
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Strip planked telescope tube
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• [ATM] portland cement; grind. etc.
  • From: "KR" <kreid@primus.ca>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] water drive
  • From: "Malcolm Macdonald" <toliman@wave.co.nz>
• Re: [ATM] portland cement; grind. etc.
  • From: "Malcolm Macdonald" <toliman@wave.co.nz>
• Re: [ATM] Lining a newtonian with cork - information required
  • From: "Marco" <marco.miglionico@btinternet.com>
• Re: [ATM] Figuring question
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Help wth 3 tube truss
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Help wth 3 tube truss
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] aluminum poles
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] ATM Digest, Vol 30, Issue 8
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Pyrex availability
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] grit disposal
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] OSLO ASPHERIC FORMULA
  • From: Matt Considine <matt@considine.net>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] water drive
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] need ides to reinforce my struts
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] water drive
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] water drive
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Fluid Drive Rate Regulation Ideas
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Baffles
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Figuring question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Figuring question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Figuring question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Slicing thick blanks - who can do it?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Applying Protective Coatings
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] 32" F/4 update and Moore
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] PPPP
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Advice on Solar scopes/observation
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Effects of a too small secondary
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Small Dob truss question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Small Dob truss question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] How should I finish polishing this 8" F/6?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] advice on making a shroud for a 10" DOB
  • From: Milton Waddam <milton_waddam@yahoo.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Milton Waddam <milton_waddam@yahoo.com>
• [ATM] Width of Dome Slit?
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] Width of Dome Slit?
  • From: "N. Foldager" <nf@dadlnet.dk>
• Re: [ATM] rutten & van venrooij - proper pronunciation
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] water drive
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Fluid Drive Rate Regulation Ideas
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Fluid Drive Rate Regulation Ideas
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Width of Dome Slit?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Baffles
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Help wth 3 tube truss
  • From: ntent <ntent@pctcnet.net>
• [ATM] Small Dob truss question
  • From: ntent <ntent@pctcnet.net>
• [ATM] Advice on Solar scopes/observation
  • From: "PaulG" <guardian@reaper.org>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Applying Protective Coatings
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Applying Protective Coatings
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Removing perforated center
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Coating not Adhering on Glass
  • From: Pete <lenses@adelphia.net>
• [ATM] Coating not Adhering on Glass
  • From: "Peter" <peter@kitgear.com>
• [ATM] Gerry Logan's telescopes, update
  • From: Peter Abrahams <telscope@europa.com>
• [ATM] final formatting of Logan photos
  • From: Peter Abrahams <telscope@europa.com>
• Re: [ATM] Width of Dome Slit?
  • From: "Philip Lardner" <philiplardner@eircom.net>
• [ATM] Applying Protective Coatings
  • From: Preston Engebretson <thecount@flash.net>
• [ATM] Applying Protective Coatings
  • From: Preston Engebretson <thecount@flash.net>
• Re: [ATM] CG Precision
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] CG Precision
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] CG Precision
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Dumb Question: how to measure a...
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Bronze reflectivity
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Coating not Adhering on Glass
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] CG Precision
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] CG Precision
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] CG Precision
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] CG Precision
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] CG Precision
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] OSLO ASPHERIC FORMULA
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Re : 50 mm FL 1 1/4 inch eyepiece
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Littrow Solutions
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Littrow Solutions
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Littrow Solutions
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] telescopes by Gerry Logan
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• [ATM] Strip planked telescope tube
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Strip planked telescope tube
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• [ATM] Lightweight tube: was Strip planked telescope tube
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: RP Sutton <rp@suttonsonline.us>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] has any here made an inexpensive filter slide for 1.25 " filters on a DOB?
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] advice on making a shroud for a 10" DOB
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] need ides to reinforce my struts
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] The new Equitorial mount, aka, water drive, ball bearing , masterpiece
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Small Dob truss question
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] Small Dob truss question
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Removing perforated center
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] WAS: RE: ATM Digest, Vol 30, Issue 21; IS: FEA models of test stand induced deflections
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] WAS: RE: ATM Digest, Vol 30, Issue 21; IS: FEA models of test stand induced deflections
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Bronze reflectivity
  • From: Sonya <sonya@ggms.com>
• Re: [ATM] Bronze reflectivity
  • From: Sonya <sonya@ggms.com>
• Re: [ATM] Trepanning Page
  • From: Sonya Gaskell <sonya@ggms.com>
• Re: [ATM] Bronze reflectivity
  • From: Sonya Gaskell <sonya@ggms.com>
• Re: [ATM] water drive
  • From: Sonya Gaskell <sonya@ggms.com>
• Re: [ATM] 50 mm FL 1 1/4 " eyepiece
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• Re: [ATM] ATM Digest, Vol 30, Issue 21
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• [ATM] Effects of a too small secondary
  • From: "Steve Chambers" <Steve@pmdo.com>
• Re: [ATM] need ides to reinforce my struts
  • From: Steve Vegos <astro@rvi.net>
• Re: [ATM] need ides to reinforce my struts
  • From: Steve Vegos <astro@rvi.net>
• [ATM] ATM Fluid Drive Rate Regulation Ideas
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Lining a newtonian with cork - information required
  • From: "Think" <thiink@gmail.com>
• Re: [ATM] Lining a newtonian with cork - information required
  • From: "Think" <thiink@gmail.com>
• Re: [ATM] Bronze reflectivity
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Removing perforated center
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Lining a newtonian with cork - information required
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Free Zerodur
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "Tom and Beth" <milliesand@cox.net>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• Re: [ATM] Slicing thick blanks - who can do it?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Lining a newtonian with cork - information required
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Strip planked telescope tube
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Strip planked telescope tube
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Advice on Solar scopes/observation
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Ultrathin mirrors, a grinding machine
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] wire spiders
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Joe Martin's Mirrors
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] wire spiders
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] wire spiders
  • From: "Treur, Harro" <harro.treur@waternet.nl>
• Re: [ATM] wire spiders
  • From: "Treur, Harro" <harro.treur@waternet.nl>
• [ATM] 50 mm FL 1 1/4 " eyepiece
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re : 50 mm FL 1 1/4 inch eyepiece
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] water drive
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Advice on Solar scopes/observation
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] Strip planked telescope tube
  • From: "Virgil.Johnson" <virgilaj@charter.net>
• Re: [ATM] water drive
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Coating not Adhering on Glass
  • From: "Vladimir Galogaza" <vladimir.galogaza1@zg.t-com.hr>
• Re: [ATM] OSLO ASPHERIC FORMULA
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] Ultrathin mirrors, a grinding machine
  • From: vorblesnak@peak.org
• [ATM] Ultrathin mirrors, a grinding machine
  • From: vorblesnak@peak.org
• [ATM] portland cement; grind. etc.
  • From: vorblesnak@peak.org
• [ATM] A pie plate scope, some pictures
  • From: vorblesnak@peak.org
• [ATM] CAmpfires
  • From: vorblesnak@peak.org
• Re: [ATM] ATM Digest, Vol 30, Issue 21
  • From: "Wolfgang Rohr" <wolfgang.rohr@t-online.de>
• Re: [ATM] Help with Strut Flexure in my 3 Truss DOB
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Bronze reflectivity
  • From: Woodchuck <djv@bedford.net>
• Re: [ATM] Unique New Equatorial Platform Design
  • From: Woodchuck <djv@bedford.net>