[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [ATM] mirror grinding
> Bob-
>
> I have often thought about this: why couldn't a guy, who knew he was
> going to do a deep (fast) large mirror, start with a flat tiled,
> channeled tool, with say, three or four layers of tiles epoxied on at
> first! THEN HE WOULDN'T HAVE TO RE-TILE!!!! HAS ANYONE EVER THOUGHT OF
> THAT?
The problem is when the tile breaks away it will be like a large
chip of glass that will likely cause a scratch...
Better to use something else to hog out and then make the tile tool.
A) Steel rimed can
B) Pulley
C) Grinding wheel (off the motor like a disk or pulley)
D) A sub-diameter Tile Tool for Hogging only
There have been numerous other objects suggested over the years
it just is a matter of what you have on hand that is the right size
tom
gotgrit.com
_______________________________________________
ATM mailing list http://www.atmlist.net/