[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[ATM] Density of materials chart
Hello all
I got tired of looking this stuff up all of the time so I made up a
little chart from various sources. They should be looked at as averages,
especially for the wood and ply figures. The metals should be fairly
accurate but can vary slightly with different alloys. The wood figures
can vary wildly with various grades and dryness, but should be a good
starting point. If anyones has some others to contribute I will add
them to the list and eventually post it on my web page under a list of
resouces.
Density of various materials
material units lb/in3 units gr/cc
units kg/m3
Aluminun(6061) .0975 2.700 2700
Steel(1020) .2835 7.850 8700
Brass .3089 8.550 8550
Bronze .2926 8.100 8100
Stainless Steel .2901 8.030 8030
Copper .3215 8.900 8900
Zinc .2546 7.050 7050
Polyethylene .0345 0.955 955
Polyurethane .0361 1.000 1000
Rubber .0544 1.506 1506
Birch/Mahogony .0255 0.705 705
Cherry .0156 0.433 433
Red Oak .0243 0.673 673
Souther Pine .0235 0.650 650
Suger Maple .0245 0.689 689
Walnut .0214 0.593 593
Baltic Birch Ply . 0240 0.664 664
_______________________________________________
ATM mailing list http://www.atmlist.net/