[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re[8]: [ATM] Melting Pitch

To: "Bob May" <bobmay@nethere.com>
Subject: Re[8]: [ATM] Melting Pitch
From: Richard <cnc@cncservo.co.uk>
Date: Wed, 15 Jun 2005 18:16:48 +0100
Cc: atm@atmlist.net
In-Reply-To: <000a01c571cc$3ff7d200$1600a8c0@amd>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <C95D60237960D51186DC0002B33B61EA0316A95E@gefr1mx1.corp.emc.com><24892D30-9000-4733-ADD1-4F6E37582098@comcast.net><1122247797.20050614173759@cncservo.co.uk><20050614124314.1s1h7i31q88cw8ks@visit.localshops.org><1137268712.20050614182200@cncservo.co.uk><004601c5710d$4351e040$500dfea9@vladimirzx1znp><526154176.20050614192917@cncservo.co.uk><000a01c571cc$3ff7d200$1600a8c0@amd>
Reply-To: Richard <cnc@cncservo.co.uk>
Sender: atm-bounces@atmlist.net

Hi Bob,

Wednesday, June 15, 2005, 6:04:09 PM, you wrote:

BM> What do you consider being able to pour it from the pot?

I'm not sure I can explain it further. Surely there comes a
point as the temperature rises, when it will pour from the pot
when tipped?. From what I can understand from others, about
77C/140F is about right. Agreed, you don't want the volatiles to
evaporate, but you don't want it to fail to fill the mold either
(if you are using a grid mold).

-- 

Best regards,
  Richard in the UK



_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: Re[8]: [ATM] Melting Pitch
  - From: "Bob May" <bobmay@nethere.com>

References:
- RE: [ATM] Melting Pitch
  - From: Royston_Jeremy@emc.com
- Re: [ATM] Melting Pitch
  - From: Gordon Baldwin <gordonbaldwin@comcast.net>
- Re[2]: [ATM] Melting Pitch
  - From: Richard <cnc@cncservo.co.uk>
- Re: Re[2]: [ATM] Melting Pitch
  - From: Ken Lowther <hermit@outofoptions.org>
- Re[4]: [ATM] Melting Pitch
  - From: Richard <cnc@cncservo.co.uk>
- Re: Re[4]: [ATM] Melting Pitch
  - From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
- Re[6]: [ATM] Melting Pitch
  - From: Richard <cnc@cncservo.co.uk>
- Re: Re[6]: [ATM] Melting Pitch
  - From: "Bob May" <bobmay@nethere.com>

Prev by Author: Re[4]: [ATM] On Axis Foucault (try this instead- longish)
Next by Author: Re[2]: [ATM] Re: Figuring the little dinky sphere
Prev by thread: Re: Re[6]: [ATM] Melting Pitch
Next by thread: Re: Re[8]: [ATM] Melting Pitch
Index(es):
- Author
- Thread