Re: [ATM] More on my Mak-Cass project

[David Whysong <dwhysong@gmail.com>]

Hi Scott,

That's a good approach! Thanks. I may try to do something similar.

- David

On Sat, 26 Jun 2004 05:58:31 -0700, Scott Rychnovsky
<srychnov@chem.ps.uci.edu> wrote:
> 
> David,
> 
> I made a large conical baffle for my DK.  I made a form with two
> disks of the appropriate diameter separated on a rod.  I used a sheet
> of 1/32 balsa wood and produced the rough cylinder by gluing it
> around the form.  After clean-up and trimming, I applied model
> builders fiberglass to the inside and outside of it, and then painted
> it black.  I admit it was a kluge, but it came out very light and
> stiff.
> 
> Scott
> 
> 
> --
> Scott Rychnovsky
> srychnov@chem.ps.uci.edu
> ATM Page: http://tlepage.home.mindspring.com/
> 




-- 
David Whysong
_______________________________________________
ATM mailing list http://www.atmlist.net/