[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Stroke

To: Big ATM <bigatm@mn.rr.com>
Subject: Re: [ATM] Stroke
From: hermit <hermit@outofoptions.com>
Date: Wed, 23 Jun 2004 23:17:03 -0400
Cc: atm@atmlist.net
In-Reply-To: <55413231054.20040623220433@mn.rr.com>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <55413231054.20040623220433@mn.rr.com>
Sender: atm-bounces@atmlist.net
User-Agent: Mozilla Thunderbird 0.7 (X11/20040615)

Start no courser than 120, maybe 220 depending on how smooth or rough 
the curve is and work mirror on top only.  Also, measure it yourself to 
the best of your ability FIRST.

Ken


Paul Johnson wrote:

>I'm a n00b who's been watching this list for about two weeks.  I'm ready to start grinding my 10" plate glass.  I ordered it pre-generated to f6 and the guy marked it f5.8 with a black sharpie.  
>
>Question.  If my goal is to grind it to f6 using #80 grit, is it best to use a 1/3 COC stroke?  All comments welcome.
>
>Thanks,
>
>Paul Johnson
>St. Paul, Minnesota USA
>9:53 PM (UTC -5)
>
>_______________________________________________
>ATM mailing list http://www.atmlist.net/
>  
>

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] Stroke
  - From: Paul Johnson <bigatm@mn.rr.com>

Prev by Author: Re: [ATM] pitch lap question
Next by Author: Re: [ATM] First Pitch Lap - any tips?
Prev by thread: [ATM] Stroke
Next by thread: RE: [ATM] Stroke
Index(es):
- Author
- Thread