Re: [ATM] First Pitch Lap - any tips?

[Hugues.Laroche@ses-astra.com]

Hi Jarvis, hi List (back from a long disconnection from the list),

>First, apply aluminum foil as previously described.
>Don't forget to oil the mirror first and get
>the foil as smooth as possible.

I am astonished. I once messed with alu foil and pitch
and the foil revealed too thin so it went away painstakingly
in small pieces and I could not get off all of the alu.
Finally had to remelt the pitch, which was contaminated
with small alu pieces which fortunately fell down to the
bottom of the melting pot. Very unconvenient however.

Maybe your alu foil is more resistant (<-> a bit thicker) than
mine, which would explain you are happy with it.
I would recommend one to check this before use.

Hugues




--
DISCLAIMER:
This e-mail contains proprietary information some or all of which may be
legally privileged. It is for the intended recipient only. If an addressing
or transmission error has misdirected this e-mail, please notify the author
by replying to this e-mail. If you are not the intended recipient you must
not use, disclose, distribute, copy, print, or rely on this e-mail.


_______________________________________________
ATM mailing list http://www.atmlist.net/