Amateur Telescope Makers (ATM) Archive for JUN02 - by author
- ATM thermal expansion coefficient of plate glass
- Re: ATM thermal expansion coefficient of plate glass
- Re: ATM thermal expansion coefficient of plate glass
- Re: ATM thermal expansion coefficient of plate glass
- Re: ATM thermal expansion coefficient of plate glass
- diamond generator, was: ATM OK, OK, I'll start by hand!
- From: u.suessenberger@t-online.de ("Uwe Süßenberger")
- Re: ATM Lateral Wire Test
- From: u.suessenberger@t-online.de ("Uwe Süßenberger")
- quantitative ronchi, was: ATM Lateral Wire Test
- From: u.suessenberger@t-online.de ("Uwe Süßenberger")
- Re: ATM Beer-nocular telescope collimation.
- From: "A&S Hincks" <hincks@bigpond.net.au>
- Re: ATM subtopics (was Re: aluminiziranje)
- From: "A&S Hincks" <hincks@bigpond.net.au>
- Re: ATM 18" First Light
- From: "A&S Hincks" <hincks@bigpond.net.au>
- Re: ATM Astigmatism
- From: "A&S Hincks" <hincks@bigpond.net.au>
- Re: ATM How good is good enough?
- From: Adrian Toledano <atoledan@prodigy.net.mx>
- ATM First timer - ecstatic!
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- Re: ATM First timer - ecstatic!
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- ATM polishing alumina
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- ATM NZ Source for pitch?
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- Re: ATM Machine Grinding Advice Needed
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- ATM Eyepieces
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- Re: ATM Eyepieces
- From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
- ATM My New Gringing Machine
- From: Alfredo Neves <arainho_cl@yahoo.com>
- Re: ATM My New Gringing Machine
- From: Alfredo Neves <arainho_cl@yahoo.com>
- RE: ATM My New Gringing Machine
- From: Alfredo Neves <arainho_cl@yahoo.com>
- ATM Machine Grinding Advice Needed
- From: Alfredo Neves <arainho_cl@yahoo.com>
- Re: ATM Machine Grinding Advice Needed
- From: Alfredo Neves <arainho_cl@yahoo.com>
- Re: ATM Machine Grinding Advice Needed
- From: Alfredo Neves <arainho_cl@yahoo.com>
- ATM How do you properly cement the mirror hole plug
- From: Alfredo Neves <arainho_cl@yahoo.com>
- RE: ATM Machine Grinding Advice Needed
- From: Alfredo Neves <arainho_cl@yahoo.com>
- Re: ATM How do you properly cement the mirror hole plug
- From: "Alfredo Neves" <aneves@novared.cl>
- Re: ATM How do you properly cement the mirror hole plug
- From: Alfredo Neves <arainho_cl@yahoo.com>
- ATM How to pre-polishing
- From: Alfredo Neves <arainho_cl@yahoo.com>
- RE: ATM Re update of web page, 32" dob
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM a little humor
- From: "Andersen, Clark R." <clanders@utmb.edu>
- RE: ATM ROC 101
- From: "Andersen, Clark R." <clanders@utmb.edu>
- ATM grinding compounds
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Texereau and metric
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Astronomy freeware
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Secondary
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Funny blank
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Funny blank to fix
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Eyepieces
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM polishing
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- RE: ATM OK, OK, I'll start by hand!
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Star catalogue
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Australian source of pitch?
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- ATM Date: Mon, 1 Jul 2002 10:28:23 +1000
- From: Andrew Melville <a.melville@mailbox.gu.edu.au>
- Re: ATM Heard on the radio!
- From: "Andrew Schott" <aschott@cfl.rr.com>
- Re: ATM Heard on the radio!
- From: Andrew Tubbiolo <enigma@seds.lpl.arizona.edu>
- RE: ATM Re update of web page, 32" dob
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Some Telescope Making Parameters Question
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Giant Homemade Plossl Eyepieces?
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM lost posts
- From: "ANeves" <aneves@novared.cl>
- RE: ATM How to pre-polishing
- From: "ANeves" <aneves@novared.cl>
- RE: ATM How to pre-polishing
- From: "ANeves" <aneves@novared.cl>
- ATM Black Rouge
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Black Rouge
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM micro ripple
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM DF-4 Glass type help! OSLO LT error?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Time Estimations
- From: Anthony Stillman <atmer@flash.net>
- ATM Measuring Long Radii
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Notes on Dyeing Nylon Screws Black
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Machine Grinding Advice Needed
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Machine Grinding Advice Needed
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Machine Grinding Advice Needed
- From: Anthony Stillman <atmer@flash.net>
- ATM Noir Rouge
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Noir Rouge OT
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM New version of Sixtests.
- From: Anthony Stillman <atmer@flash.net>
- ATM Making a Pinhole
- From: Anthony Stillman <atmer@flash.net>
- ATM Persistent Turned Edge
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Apochromatic Eyes?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Re: Unobstructed Newtonians
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Porthole glass mirrors
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM: Large obstruction Newtonians
- From: Anthony Stillman <atmer@flash.net>
- ATM Re-assembling a Mak
- From: Anthony Stillman <atmer@flash.net>
- ATM Re: How to disassemble a Questar ?
- From: "Antonio de Ugarte" <de_ugarte@terra.es>
- Re: ATM Re: How to disassemble a Questar ?
- From: "Antonio de Ugarte" <de_ugarte@terra.es>
- Re: ATM Re: How to disassemble a Questar ?
- From: "Antonio de Ugarte" <de_ugarte@terra.es>
- Re: ATM update of web page, 18" Composite scope
- From: "at making" <atmaking@hotmail.com>
- Re: ATM Re update of web page, 32" dob
- From: "at making" <atmaking@hotmail.com>
- Re: ATM Re update of web page, 32" dob
- From: "at making" <atmaking@hotmail.com>
- ATM New 26" scope
- From: "at making" <atmaking@hotmail.com>
- ATM carbon fabric protection
- From: "at making" <atmaking@hotmail.com>
- RE: ATM carbon fabric protection
- From: "at making" <atmaking@hotmail.com>
- RE: ATM Figuring a 6" F4
- From: "Banich, Howard" <Howard.Banich@nike.com>
- Re: ATM flex mirror
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM Portable Vacuum Pump
- From: "Bill Kelley" <flex@commspeed.net>
- ATM Fw: Barnsite
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM Fw: Barnsite
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM re:flex list
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM re:flex list
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM re:flex list
- From: "Bill Kelley" <flex@commspeed.net>
- Re: ATM I need book..
- From: "Bill Kocken" <wmkocken@hotmail.com>
- Re: ATM Lateral Wire Test
- From: Bill Marriott <btk@pacbell.net>
- ATM seeking mirror chip advice
- From: Bill Mitchell <astronutski@yahoo.com>
- ATM ROC 101
- From: Bill Mitchell <astronutski@yahoo.com>
- ATM 18" First Light
- From: Bill Mitchell <astronutski@yahoo.com>
- Re: ATM 18" First Light
- From: Bill Mitchell <astronutski@yahoo.com>
- RE: ATM 18" First Light
- From: Bill Mitchell <astronutski@yahoo.com>
- Re: ATM 18" First Light
- From: Bill Mitchell <astronutski@yahoo.com>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: Bill Mitchell <astronutski@yahoo.com>
- Re: ATM Updated Page: 12.5" Two Truss & Round Secondary Cage
- From: Bill Mitchell <astronutski@yahoo.com>
- Re: ATM Where is Berthold Hamburger's Web Site?
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Funny blank to fix
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: "Bill T." <twentiethwave@hotmail.com>
- RE: ATM Funny blank
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM suggestions for annealing test
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Handy lap-making tip
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Does anybody want a 2.5-ton electromagnet?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM OK, OK, I'll start by hand!
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Interval Figuring, was 19th Nervous Breakdown
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Apochromatic Eyes?
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Spin Figuring, a definition please.
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Astigmatism
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Spin Figuring, a definition please.
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Sub-di. tool coating ?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Quantify Figuring Session Effects?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM TASCO Support - *** Any rumor of TASCO folding??
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM subtopics (was Re: aluminiziranje)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Vacuum Flex
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Beer-nocular telescope collimation.
- From: "Bob May" <bobmay@nethere.com>
- ATM Richard's rant email list
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM subtopics (was Re: aluminiziranje)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Beer-nocular telescope collimation.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Beer-nocular collimation
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 3" spherical OK for scope?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Grit sizes for Kits
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Richard's rant email list
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Flex mirror question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Adjustable virtual counte weight
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM microripple
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Grit table?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM BSC glass vs pyrex
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Texereau and metric
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Tester light source
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Is my blank thick enough!!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Texereau and metric
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Tester light source
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Laser diode with 'collimating lens'
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Giant Homemade Plossl Eyepieces?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Binocular Telescope Design
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM BSC glass vs pyrex
- From: "Bob May" <bobmay@nethere.com>
- ATM Heard on the radio!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM brass washers - machinist question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM OT: mains voltage.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM ferric oxide - printers opaque red solution
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Portable Vacuum Pump
- From: "Bob May" <bobmay@nethere.com>
- ATM DF-4 Glass type help!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Working on a Parabol
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Newbie plaster/tile tool question
- From: "Bob May" <bobmay@nethere.com>
- Re: RE: ATM DF-4 Glass type help! OSLO LT error?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Working on a Parabol
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM how to collimate an old celestron schmidt-cass?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Sagitta
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Quality of polish
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Time Estimations
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Source ideas for heavy grit.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Funny blank
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM tile tool
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Tool diameters for working a 30" mirror blank?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing Pads and BVC Glass
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Funny blank
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM dental plaster - pour stone
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Break Clutch
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing Pads and BVC Glass
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM dental plaster - pour stone
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Erect image
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Aussie equiv. to Pourstone/dental Stone
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 18" First Light
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM muzzle velocity
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Micro Grit
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM OSLO 5.4
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Hole in primary
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM wedge
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How do you properly cement the mirror hole plug
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Updated Page: 25" Folded Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Way OT. Need some help.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How good is good enough? and Thanks for the advice!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Clutch for home made fork mount
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How good is good enough?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Cheap Adaptive Optics
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM batteries for LED
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM lost posts
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How good is good enough? and Thanks for the advice!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM batteries for LED
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Cheap Adaptive Optics
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How good is good enough? and Thanks for the advice!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: pinhole
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM OK, OK, I'll start by hand!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM batteries for LED
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Foucault & Pinhole Camera?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: From Dob to Drive
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM progress report
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Aberrations
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Porthole glass mirrors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Lateral Wire Test
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to pre-polishing
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM hex tiles?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to pre-polishing
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Which tool?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Radio Telescopes.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Radio Telescopes.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM crater
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Source for small mirrors or blanks
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Astigmatism detection?
- From: "Bob May" <bobmay@nethere.com>
- ATM Portable Vacuum Pump
- From: "Bob Walker" <tac@i1.net>
- ATM Tester light source
- From: "Bob Walker" <tac@i1.net>
- ATM Need help interpreting tests
- From: "Bob Walker" <tac@i1.net>
- ATM Figuring Help THANKS
- From: "Bob Walker" <tac@i1.net>
- ATM Oblateness Gone!
- From: "Bob Walker" <tac@i1.net>
- ATM Are We There Yet?
- From: "Bob Walker" <tac@i1.net>
- ATM Arrrghhh
- From: "Bob Walker" <tac@i1.net>
- ATM Re: Dwight's tester
- From: "Bob Walker" <tac@i1.net>
- ATM 19th Nervous Breakdown
- From: "Bob Walker" <tac@i1.net>
- ATM Lateral Wire Test
- From: "Bob Walker" <tac@i1.net>
- ATM First Light ... uh, kinda...
- From: "Bob Walker" <tac@i1.net>
- ATM Lateral Wire Test
- From: "Bob Walker" <tac@i1.net>
- ATM Astigmatism detection?
- From: "Bob Walker" <tac@i1.net>
- ATM Where is Mark Holm?
- From: "Bob Walker" <tac@i1.net>
- Re: ATM Spin Figuring, a definition please.
- From: Brad <brad@escapees.com>
- Re: ATM What happened to Berthold Hamburger's website - does anyone know?
- From: Brian <blast@aloha.net>
- Re: ATM Bubbles in BVC
- Re: ATM mirror coatings
- From: Chris Plicht <chris@plicht.de>
- ATM Figuring a 6" F4
- From: Claude Serquet <claude.serquet@actant.com>
- Re: Lithium grease verses Super Lube (Teflon Grease) in ATM project
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Black Rouge
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Slurry pump idea from aquarists
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM I need book..
- From: "clement.focuser" <clement.focuser@verizon.net>
- ATM Notes on Dyeing Nylon Screws Black
- From: "clement.focuser" <clement.focuser@verizon.net>
- Re: ATM Backlash Elimination for Leadscrew Drives
- From: "clement.focuser" <clement.focuser@verizon.net>
- ATM Beer-nocular collimation
- From: Clive Milne <milnecd@yahoo.com>
- ATM Binocular design
- From: Clive Milne <milnecd@yahoo.com>
- ATM Binocular Collimation
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re update of web page, 32" dob
- From: Clive Milne <milnecd@yahoo.com>
- Re: ATM Binocular Telescope Design
- From: Clive Milne <milnecd@yahoo.com>
- ATM A few metal craft links
- From: Clive Milne <milnecd@yahoo.com>
- ATM 20" Bino second impressions.
- From: Clive Milne <milnecd@yahoo.com>
- ATM Air frame rivets.
- From: Clive Milne <milnecd@yahoo.com>
- ATM The significance of diffraction
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re The significance of diffraction
- From: Clive Milne <milnecd@yahoo.com>
- ATM Energy distribution profile (was: Unobstructed Newtonians)
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re: Unobstructed Newtonians
- From: Clive Milne <milnecd@yahoo.com>
- ATM An even better example....
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re: Unobstructed Newtonians
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re: Unobstructed Newtonians
- From: Clive Milne <milnecd@yahoo.com>
- ATM OT Audiophile on the list?
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re Large obstruction Newtonians
- From: Clive Milne <milnecd@yahoo.com>
- ATM Large obstruction Newtonians
- From: Clive Milne <milnecd@yahoo.com>
- ATM Synchronous motors
- From: Clive Rogers <lib@cawas.freeserve.co.uk>
- Re: ATM Synchronous motors
- From: Clive Rogers <lib@cawas.freeserve.co.uk>
- Re: ATM Synchronous motors
- From: Clive Rogers <lib@cawas.freeserve.co.uk>
- ATM Clutch for home made fork mount
- From: Clive Rogers <lib@cawas.freeserve.co.uk>
- Re: ATM Clutch for home made fork mount
- From: Clive Rogers <lib@cawas.freeserve.co.uk>
- RE: ATM Vacuum Flex
- From: "CSC" <optic@gwi.net>
- RE: ATM Zone Intensity evaluation, Was semi-weird stuff
- From: "CSC" <optic@gwi.net>
- RE: ATM flex mirror
- From: "CSC" <optic@gwi.net>
- RE: ATM Black Rouge
- From: "CSC" <optic@gwi.net>
- RE: ATM Fluid Flex? was Vacuum Flex
- From: "CSC" <optic@gwi.net>
- RE: ATM Flex mirror question
- From: "CSC" <optic@gwi.net>
- ATM RE: Barnesite
- From: "CSC" <optic@gwi.net>
- RE: ATM Black Rouge
- From: "CSC" <optic@gwi.net>
- RE: ATM micro ripple
- From: "CSC" <optic@gwi.net>
- RE: ATM seeking mirror chip advice
- From: "CSC" <optic@gwi.net>
- RE: ATM micro ripple
- From: "CSC" <optic@gwi.net>
- RE: ATM Made a pin stick
- From: "CSC" <optic@gwi.net>
- RE: ATM re:flex list
- From: "CSC" <optic@gwi.net>
- RE: ATM folded Newts
- From: "CSC" <optic@gwi.net>
- RE: ATM Oblateness Gone!
- From: "CSC" <optic@gwi.net>
- RE: ATM Eyepieces
- From: "CSC" <optic@gwi.net>
- RE: ATM OK, OK, I'll start by hand!
- From: "CSC" <optic@gwi.net>
- FW: ATM polishing
- From: "CSC" <optic@gwi.net>
- RE: ATM How to test a sphere for astigmatism
- From: "CSC" <optic@gwi.net>
- Re: ATM muzzle velocity
- From: "Dale Campbell" <campbeld@advion.com>
- Re: ATM Eyepieces
- From: "Dale Campbell" <campbeld@advion.com>
- Re: ATM Funny Blank
- From: "Damian Kruger" <djkruger@mpx.com.au>
- ATM Aussie equiv. to Pourstone/dental Stone
- From: "Damian Kruger" <djkruger@mpx.com.au>
- ATM Just ordered my blank
- Re: ATM OK, OK, I'll start by hand!
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- ATM : Re: Astigmatism
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- ATM: Re: Astigmatism
- From: "Dan Chaffee" <dchaffee@blitz-it.net>
- Re: ATM-as a terrorist?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Air frame rivets.
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Tool diameters for working a 30" mirror blank?
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM Re: Dwight's tester
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM batteries for LED
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM OK, OK, I'll start by hand!
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM batteries for LED
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM 19th Nervous Breakdown
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM First Light ... uh, kinda...
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- Re: ATM Which tool?
- From: "Dave McCarter" <dmccarter@sympatico.ca>
- ATM Source for small mirrors or blanks
- From: "Dave Richardson" <yickityoptorus@hotmail.com>
- Re: ATM mirror coatings
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Yahoo Groups
- From: "David B. Toth" <ve3gyq@amsat.org>
- Re: ATM Bubbles in BVC
- From: "David H. Bevel" <davebevel@mindspring.com>
- ATM: Breaking in Portland/winburn tool
- From: "David Harbour" <scarab2@cox.net>
- ATM Correction last post-
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM mirror coatings
- From: "David Harbour" <scarab2@cox.net>
- ATM Portland Winburn Hex tool-
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM: Breaking in Portland/winburn tool
- From: "David Harbour" <scarab2@cox.net>
- ATM Further notes, Winburn tool-
- From: "David Harbour" <scarab2@cox.net>
- ATM: MMT, moths
- From: "David Harbour" <scarab2@cox.net>
- ATM Treatise on figuring-
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Funny blank to fix
- From: "David Harbour" <scarab2@cox.net>
- ATM "Funny blank"
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Erect image
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM muzzle velocity
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Erect image
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Hole in primary
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Hole in primary
- From: "David Harbour" <scarab2@cox.net>
- ATM Large mounting offered-
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM unobstructed Newtonian
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM OK, OK, I'll start by hand!
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM unobstructed Newtonian
- From: "David Harbour" <scarab2@cox.net>
- Fw: ATM unobstructed Newtonian (correction)
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Astigmatism
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM: Large obstruction Newtonians
- From: "David Harbour" <scarab2@cox.net>
- ATM Big web page, figuring-
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM f3 elipse?
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Byers clockdrive advice
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM f3 elipse?
- From: "David Harbour" <scarab2@cox.net>
- Re: ATM Heard on the radio!
- From: David Palmer <dlpalmer@gte.net>
- ATM Giant Homemade Plossl Eyepieces?
- From: David Sleeter <d.sleeter@verizon.net>
- Re: ATM how to collimate an old celestron schmidt-cass?
- From: David Sleeter <d.sleeter@verizon.net>
- ATM thermal expansion coefficient of plate glass
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- ATM MMT, moths
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- ATM Where is Berthold Hamburger's Web Site?
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM OT: mains voltage.
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Portable Vacuum Pump
- From: Del Stanton <sd20@earthlink.net>
- ATM What happened to Berthold Hamburger's website - does anyone know?
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Machine Grinding Advice Needed
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM wedge
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM OK, OK, I'll start by hand!
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM OK, OK, I'll start by hand!
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- RE: ATM Sub-Diameter Tool and Stroke Length
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Dennis Rech <dennisrech@mirror-o-matic.com>
- ATM Re: Breaking in Portland/winburn tool
- From: "designsdavis" <designsdavis@mchsi.com>
- ATM coated plastic lenses
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Backlash Elimination for Leadscrew Drives
- From: "Don Clement" <clement.focuser@verizon.net>
- ATM OSLO 5.4
- From: "donovan" <donovan@bravoz.com>
- ATM Doug Bailey/Carolinas/TAX/EYLLP/US is out of the office.
- ATM Newbie plaster/tile tool question
- From: Douglas Braun <doug@dougbraun.com>
- ATM Polishing Pads and BVC Glass
- From: Douglas Braun <doug@dougbraun.com>
- ATM Handy lap-making tip
- From: Douglas Braun <doug@dougbraun.com>
- Re: ATM Cheap Adaptive Optics
- From: Douglas Braun <doug@dougbraun.com>
- Re: ATM Help! Strange 7 x 50 binocular identification
- From: Douglas Braun <doug@dougbraun.com>
- Re: ATM hex tiles?
- From: Douglas Braun <doug@dougbraun.com>
- ATM Annoying Cerium Oxide Residue
- From: Douglas Braun <doug@dougbraun.com>
- Re: ATM Newbie plaster/tile tool question
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM Funny blank
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM Cheap Adaptive Optics
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM OK, OK, I'll start by hand!
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM suppliers in New York city
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- Re: ATM Foucault & Pinhole Camera?
- From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
- re: ATM Source ideas for heavy grit.
- From: "Douglas S Angle" <Douglas.S.Angle@can.dupont.com>
- RE: ATM Vacuum Flex
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Grit sizes for Kits
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- RE: ATM Some Telescope Making Parameters Question
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Tester light source
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Binocular Telescope Design
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Binocular Telescope Design
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Binocular Telescope Design
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM ROC 101
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Sagitta
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Need help interpreting tests
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Funny blank
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Funny blank to fix
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Erect image
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Erect image
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Synchronous motors
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Tool diameters for working a 30" mirror blank?
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Are We There Yet?
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM F-Ratio
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM F-Ratio
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Re: Dwight's tester
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM F-Ratio
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM batteries for LED
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Help! Strange 7 x 50 binocular identification
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM unobstructed Newtonian
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Foucault & Pinhole Camera?
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Curing cement under water?
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Re: quantitative ronchi
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM Which tool?
- From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
- Re: ATM RE: Barnesite
- From: edwski <edwski@comcast.net>
- Re: ATM Progress, slow progress...
- From: edwski <edwski@comcast.net>
- ATM Binocular Telescope Design
- From: "Emery, Greg" <emeryg@mail.mohawkc.on.ca>
- Re: ATM muzzle velocity
- From: "Emery, Greg" <emeryg@mail.mohawkc.on.ca>
- ATM Bino Scope Design
- From: "Emery, Greg" <emeryg@mail.mohawkc.on.ca>
- Re: ATM First Baby Steps
- From: "Emery, Greg" <emeryg@mail.mohawkc.on.ca>
- Re: ATM Texereau and metric
- From: "Eric Royer" <eroyer@club-internet.fr>
- ATM muzzle velocity
- From: Eric Smith <eric@nutstreet.net>
- Re: ATM muzzle velocity
- From: Eric Smith <eric@nutstreet.net>
- Re: ATM Astigmatism detection?
- From: "francis milsom" <francis@milsom.clara.co.uk>
- RE: ATM Grit sizes for Kits
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Beer-nocular collimation
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM subtopics (was Re: aluminiziranje)
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Black Rouge
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Some Telescope Making Parameters Question
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Adjustable virtual counte weight
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM seeking mirror chip advice
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Some Telescope Making Parameters Question
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM ROC 101
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Heard on the radio!
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Newbie plaster/tile tool question
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Sagitta
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Funny blank
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM How good is good enough?
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM How good is good enough?
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Noir Rouge
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM polishing
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Making a Pinhole
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM 19th Nervous Breakdown
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Foucault & Pinhole Camera?
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM secondary cage size
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM How to pre-polishing
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM How to pre-polishing
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Re: How to disassemble a Questar ?
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Re-assembling a Mak
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM f3 elipse?
- From: "Frank Ward" <thewards@mindspring.com>
- RE: ATM Annoying Cerium Oxide Residue
- From: "Frank Ward" <thewards@mindspring.com>
- ATM How good is good enough?
- From: "Frank Welsh" <f.welsh@verizon.net>
- RE: ATM How good is good enough? and Thanks for the advice!
- From: "Frank Welsh" <f.welsh@verizon.net>
- ATM Sonotube "stripping"
- From: Fred Kiesche <godel2escher2bach@yahoo.com>
- ATM Address change
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- Re: ATM dental plaster - pour stone
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- Re: ATM dental plaster - pour stone
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- ATM Sixtests hardcopy output
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- Re: ATM Radio Telescopes.
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- ATM Quoting
- From: "Galogaza" <elizabeta.galogaza@siol.net>
- ATM f3 elipse?
- From: "Gary McKenzie" <garymck@optusnet.com.au>
- Re: ATM f3 elipse?
- From: "Gary McKenzie" <garymck@optusnet.com.au>
- Re: ATM Bubbles in BVC
- From: "George Blahun Jr." <ks1u@prodigy.net>
- RE: ATM ROC 101
- From: Gilbert Gagne <gilgagne@bellsouth.net>
- Re: ATM Annoying Cerium Oxide Residue
- From: "glen youman" <gleny@starstream.net>
- RE: ATM a little humor
- From: "Good, Donald" <dgood@aha.org>
- RE: ATM Cheap Adaptive Optics +
- From: "Good, Donald" <dgood@aha.org>
- Re: ATM Cheap Adaptive Optics
- Re: ATM Cheap Adaptive Optics
- ATM Re: [capitalastronomers] NCA amateur telescope making workshop moving to CCCC
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Re: [capitalastronomers] NCA amateur telescope making workshop moving to CCCC
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM BSC glass vs pyrex
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM ferric oxide - printers opaque red solution
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Texereau and metric
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Re: moving schedule Saturday
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Texereau Units
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM moving the NCA mirror-making workshop
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Re: moving the NCA mirror-making workshop
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM class Friday 6-14
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Re: [capitalastronomers] moving the NCA lathe, aluminizer, vacuum pump, and cabinets
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM moving the NCA lathe, aluminizer, vacuum pump, and cabinets
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Does anybody want a 2.5-ton electromagnet?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM moving the lathe and aluminizer tomorrow, Sat6-22
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM thanks
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM re:flex list
- From: "Harold" <adams@rmci.net>
- Re: ATM re:flex list
- From: "Harold" <adams@rmci.net>
- Re: ATM re:flex list
- From: "Harold" <adams@rmci.net>
- Re: ATM wedge
- From: "Harold" <adams@rmci.net>
- Re: ATM How good is good enough?
- From: "Harold" <adams@rmci.net>
- Re: ATM How good is good enough?
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM unobstructed Newtonian
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM central crater
- From: "Herb Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Vacuum Flex
- From: Hermit <klowther@cisnet.com>
- Re: ATM: Breaking in Portland/winburn tool
- From: Hermit <klowther@cisnet.com>
- Re: ATM: Breaking in Portland/winburn tool
- From: Hermit <klowther@cisnet.com>
- Re: ATM 3" spherical OK for scope?
- From: Hermit <klowther@cisnet.com>
- Re: ATM microripple
- From: Hermit <klowther@cisnet.com>
- Re: ATM-as a terrorist?
- From: Hermit <klowther@cisnet.com>
- Re: ATM Newbie plaster/tile tool question
- From: Hermit <klowther@cisnet.com>
- Re: ATM ROC 101
- From: Hermit <klowther@cisnet.com>
- Re: ATM Sagitta
- From: Hermit <klowther@cisnet.com>
- Re: ATM Diffraction Experts Needed :)
- From: Hermit <klowther@cisnet.com>
- Re: ATM Handy lap-making tip
- From: Hermit <klowther@cisnet.com>
- Re: ATM 3D Mirror Deformation Display
- From: Hermit <klowther@cisnet.com>
- Re: ATM batteries for LED
- From: Hermit <klowther@cisnet.com>
- Re: ATM OK, OK, I'll start by hand!
- From: Hermit <klowther@cisnet.com>
- Re: ATM hex tiles?
- From: Hermit <klowther@cisnet.com>
- Re: ATM How to test a sphere for astigmatism
- From: Hermit <klowther@cisnet.com>
- Re: ATM Radio Telescopes.
- From: Hermit <klowther@cisnet.com>
- Re: ATM Radio Telescopes.
- From: Hermit <klowther@cisnet.com>
- Re: ATM OK, OK, I'll start by hand!
- From: Hugues.Laroche@ses-astra.com
- Re: ATM : Re: Astigmatism
- From: Hugues.Laroche@ses-astra.com
- Re: ATM Lateral Wire Test
- From: Hugues.Laroche@ses-astra.com
- Re: ATM Lateral Wire Test
- From: Hugues.Laroche@ses-astra.com
- ATM back on
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM First light with a legend
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM skyrock
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM On Forein Languages
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- Re: ATM On Forein Languages
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- ATM Is my blank thick enough!!
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- Re: ATM Is my blank thick enough!!
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- ATM I need book..
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- ATM Erect image
- From: "Ivan Trpeski" <trpeski@myrealbox.com>
- Re: ATM Zone Intensity evaluation, Was semi-weird stuff
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Beer-nocular collimation
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Fluid Flex? was Vacuum Flex
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Zone Intensity evaluation, Part 2
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Diffraction Experts Needed :)
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Edge Diffraction & TDE & Foucault Q's
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM suggestions for annealing test
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM 3D Mirror Deformation Display
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM 3D Mirror Deviation, One that should work for everyone!
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM 3D Mirror bug fix
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM 19th Nervous Breakdown
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM 3-d images
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Foucault & Pinhole Camera?
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM Astigmatism detection?
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM 3dMirror Bug Fix, Again....
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM How good is good enough? Part Two
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Quantify Figuring Session Effects?
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Re: Astronomy software
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM 3" spherical OK for scope?
- From: "James Taylor" <u2pilot@satx.rr.com>
- Re: ATM 3" spherical OK for scope? THANKS
- From: "James Taylor" <u2pilot@satx.rr.com>
- ATM Dan Cassaro thanks
- From: "James Taylor" <u2pilot@satx.rr.com>
- ATM Any events happening in CA?
- From: "James Taylor" <u2pilot@satx.rr.com>
- ATM Dob Driver question
- From: "James Taylor" <u2pilot@satx.rr.com>
- RE: ATM OK, OK, I'll start by hand!
- From: "James Taylor" <u2pilot@satx.rr.com>
- ATM secondary cage size
- From: "James Taylor" <u2pilot@satx.rr.com>
- ATM focuser baffle
- From: "James Taylor" <u2pilot@satx.rr.com>
- Re: ATM Zone Intensity evaluation, Was semi-weird stuff
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Suggestions for a program..............
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Zone Intensity evaluation, Part 2
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Edge Diffraction & TDE & Foucault Q's
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Oblateness Gone!
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Are We There Yet?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM New version of Sixtests.
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM What Rayleigh said (was: aargh! maybe)
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Sixtests hardcopy output
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Sixtests hardcopy output
- From: "James W. Burrows" <burrjaw@earthlink.net>
- ATM Sixtests printing fixed.
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Foucault & Pinhole Camera?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Lateral Wire Test
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Astigmatism detection?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM Quantify Figuring Session Effects?
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: ATM How good is good enough? Part Two
- From: "James W. Burrows" <burrjaw@earthlink.net>
- Re: quantitative ronchi, was: ATM Lateral Wire Test
- From: Jan Bentz <jbentz@inreach.com>
- ATM Re: [lightbucket] Summary
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM Some Telescope Making Parameters Question
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM Vacuum/vapor deposition of silver for coatings?
- From: "Jeff Justice" <justice1000@insightbb.com>
- ATM ferric oxide - printers opaque red solution
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM a little humor
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM dental plaster - pour stone
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM tile tool
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM dental stone
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM wedge
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM lost posts
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM Re: pinhole
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM progress report
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM Re: Ronchi
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM parabolizing question
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM central crater
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM crater
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM crater update
- From: "Jerry B. Hillman" <JBHillman@ev1.net>
- ATM Porthole glass mirrors
- From: Jerry Gaiser <jerryg@gaiser.org>
- ATM Re: Porthole glass mirrors
- From: Jerry Gaiser <jerryg@gaiser.org>
- Re: ATM Amateur English yoke mounts?
- From: Jerry Hudson <hudsonjk@pacbell.net>
- Re: ATM Vacuum Flex
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Vacuum Flex
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Vacuum Flex
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Vacuum Flex
- From: "Jim Miller" <jim@jtmiller.com>
- Grinding Curved back mirror? Re: ATM Portable Vacuum Pump
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Flex mirror question
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Bicycle sprocket drive for grinder?
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Slurry pump idea from aquarists
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Machine Grinding MOT?
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM Machine Grinding MOT?
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM My New Gringing Machine
- From: "Jim Miller" <jim@jtmiller.com>
- Re: ATM dental plaster - pour stone
- From: "Jim Miller" <jim@jtmiller.com>
- ATM Groundhog Day?
- From: "Jim Miller" <jim@jtmiller.com>
- FW: ATM Funny blank
- From: "Jim Warner" <warners@bgcc.com>
- ATM new ISP
- From: "Jimmy La Fountain" <lafountainj@earthlink.net>
- Re: ATM The Grind Has Begun
- From: Joe campbell <joe@esper.com>
- Re: ATM-as a terrorist?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Funny blank
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM How good is good enough?
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM F-Ratio
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM hex tiles?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Need help interpreting tests
- From: "John D. Upton" <jd-upton@texas.net>
- RE: ATM How to pre-polishing
- From: "John D. Upton" <jd-upton@texas.net>
- RE: ATM Re: How to disassemble a Questar ?
- From: John Hutto <jdhutto@yahoo.com>
- Re: ATM Byers clockdrive advice
- From: John Hutto <jdhutto@yahoo.com>
- Re:ATM Hole In Primary
- From: "John McLean" <jsmclean@gis.net>
- ATM Suggestions for a program..............
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM grinding compounds
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Funny blank
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Aussie equiv. to Pourstone/dental Stone
- From: "John Murray" <onslow@austarnet.com.au>
- ATM Fever
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Dob Driver question
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Re: pinhole
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM progress report
- From: "John Sherman" <shermj@netzero.net>
- ATM Astigmatism
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM : Re: Astigmatism
- From: "John Sherman" <shermj@netzero.net>
- ATM Adjustable virtual counte weight
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Adjustable virtual counte weight
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Amateur English yoke mounts?
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM First Baby Steps
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM OK, OK, I'll start by hand!
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Apochromatic Eyes?
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Lateral Wire Test
- From: John Swenson <johnswenson1@attbi.com>
- Re: ATM Erect image
- From: Joseph Goins <jb_goins@yahoo.com>
- ATM Help! Strange 7 x 50 binocular identification
- From: Joseph Johnston <usc@sover.net>
- Re:ATM Oblateness Gone!
- From: jsgrmfg@gracemfg.com
- ATM Foucault & Pinhole Camera?
- From: jsgrmfg@gracemfg.com
- ATM Flex mirror question
- Re: ATM: Breaking in Portland/winburn tool
- Re: ATM Flex mirror question
- Re: ATM Astronomy freeware
- Re: ATM First timer - ecstatic!
- Re: ATM Handy lap-making tip
- Re: ATM NZ Source for pitch?
- Re: ATM Eyepieces
- Re: ATM OK, OK, I'll start by hand!
- Re: ATM OK, OK, I'll start by hand!
- Re: ATM Heard on the radio!
- From: karen vanderhule <nitesite@lgcy.com>
- Re: ATM Re update of web page, 32" dob
- From: "Kelly & Phillipa Williams" <kellyw@ihug.co.nz>
- Re: ATM ROC 101
- From: "Kelly & Phillipa Williams" <kellyw@ihug.co.nz>
- ATM Which tool?
- From: "Kelly & Phillipa Williams" <kellyw@ihug.co.nz>
- ATM Mirror Blank Supplier
- From: "Kelly & Phillipa Williams" <kellyw@ihug.co.nz>
- Re: ATM mirror coatings
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Vacuum Flex
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM Geared Stepper motor for Focault or focuser use
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM TASCO Support - *** Any rumor of TASCO folding??
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Portable Vacuum Pump
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Portland Winburn Hex tool-
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Fluid Flex? was Vacuum Flex
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: Grinding Curved back mirror? Re: ATM Portable Vacuum Pump
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Flex mirror question
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM microripple
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Slurry pump idea from aquarists
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM BSC glass vs pyrex
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM swamp cooler pump for circulating polishing compound
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM a little humor
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM seeking mirror chip advice
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Tester light source
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM I need book..
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM ROC 101
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM Yahoo Groups
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM First timer - ecstatic!
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM Machine Grinding Advice Needed
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Aussie equiv. to Pourstone/dental Stone
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Groundhog Day?
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM Synchronous motors
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM wedge
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM polishing
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Sixtests hardcopy output
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM 3-d images
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM Telescope making (Missing something)
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Sixtests hardcopy output
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM progress report
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM progress report
- From: Ken Hunter<kb7h@onemain.com>
- Re: ATM Source for small mirrors or blanks
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM How good is good enough? Part Two
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM microripple
- From: "Klaas Honders" <k.honders@worldonline.nl>
- Re: Re: ATM Newbie plaster/tile tool question
- From: klowther@cisnet.com
- Re: ATM Quantify Figuring Session Effects?
- From: klowther@cisnet.com
- Re: ATM Giant Homemade Plossl Eyepieces?
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM Mirror Cleaning and keeping it clean
- From: "Krishnadatta Purohit" <purohit9@elp.rr.com>
- Re: ATM carbon fabric protection
- From: "ks1u" <ks1u@prodigy.net>
- Re:ATM Porthole glass mirrors
- From: kwhitefire@juno.com
- Re: ATM Air frame rivets.
- From: "Larry Davis" <Davis@digdat.com>
- Re; ATM Groundhog Day?
- From: "Larry Davis" <Davis@digdat.com>
- ATM Diffraction Eyes?
- From: "Larry Davis" <Davis@digdat.com>
- ATM Lunar stereo, was ATM Re update of web page, 32" dob
- From: "Launie, Kenneth J" <LAUNIEK@polaroid.com>
- ATM Amateur English yoke mounts?
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM Amateur English yoke mounts?
- From: Lawrence Sayre <lsayre@apk.net>
- ATM Tool diameters for working a 30" mirror blank?
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM dental plaster - pour stone
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM dental plaster - pour stone
- From: Lawrence Sayre <lsayre@apk.net>
- ATM Source for 5.5" elliptical diagonal mirror?
- From: Lawrence Sayre <lsayre@apk.net>
- ATM Diameter of secondary cage (is this method correct?)
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: Lawrence Sayre <lsayre@apk.net>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: Lawrence Sayre <lsayre@apk.net>
- ATM Historical stuff?
- From: Leftfieldstar@aol.com
- Fwd: ATM Fluid Flex? was Vacuum Flex
- From: Leftfieldstar@aol.com
- Re: ATM Fluid Flex? was Vacuum Flex
- From: Leftfieldstar@aol.com
- Re: ATM Fluid Flex? was Vacuum Flex, Hydrostatic Pressure Differential Effect...
- From: Leftfieldstar@aol.com
- ATM Test only do not read
- From: Leftfieldstar@aol.com
- ATM seeing conditions forecaster
- From: Leftfieldstar@aol.com
- Re: ATM suggestions for annealing test
- From: Leftfieldstar@aol.com
- ATM piezo actuators and mirror flex
- From: Leftfieldstar@aol.com
- Re: ATM folded Newts
- From: Leftfieldstar@aol.com
- Re: ATM dental plaster - pour stone
- From: Leftfieldstar@aol.com
- Fwd: ATM Tool diameters for working a 30" mirror blank?
- From: Leftfieldstar@aol.com
- ATM Cheap Adaptive Optics
- From: Leftfieldstar@aol.com
- Re: ATM F-Ratio
- From: Leftfieldstar@aol.com
- Re: ATM Cheap Adaptive Optics
- From: Leftfieldstar@aol.com
- ATM SI units
- From: Leftfieldstar@aol.com
- Re: ATM Cheap Adaptive Optics
- From: Leftfieldstar@aol.com
- Re: ATM OK, OK, I'll start by hand!
- From: Leftfieldstar@aol.com
- Re: ATM unobstructed Newtonian
- From: Leftfieldstar@aol.com
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Leftfieldstar@aol.com
- ATM Apochromatic Eyes?
- From: Leftfieldstar@aol.com
- Re: ATM Adjustable virtual counte weight
- ATM Grit table?
- ATM Email ????????
- Re: ATM Sub-Diameter Tool and Stroke Length
- Re: ATM Sub-Diameter Tool and Stroke Length
- ATM Micro Grit
- ATM Re: Coated plastic lenses
- Re: ATM NZ Source for pitch?
- From: "Macdonald" <toliman@wave.co.nz>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
- ATM Source ideas for heavy grit.
- From: "Malcolm Kynoch" <malcolm@aztec-net.com>
- Re: ATM Re update of web page, 32" dob
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM wedge
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM wedge
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM How good is good enough?
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM wedge
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Cheap Adaptive Optics
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM First Baby Steps
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Cheap Adaptive Optics
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM How good is good enough? and Thanks for the advice!
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM unobstructed Newtonian
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM batteries for LED
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM batteries for LED
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM unobstructed Newtonian
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Re: Unobstructed Newtonians
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Re Large obstruction Newtonians
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Spin Figuring, a definition please.
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM Annoying Cerium Oxide Residue
- From: Mark Cowan <toolontop@yahoo.com>
- Re: ATM mirror coatings
- From: Mark Holm <mdholm@telerama.com>
- ATM Slurry pump idea from aquarists
- From: Mark Holm <mdholm@telerama.com>
- ATM Is my blank thick enough!!
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM I need book..
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Is my blank thick enough!!
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM I need book..
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM dental plaster - pour stone
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM dental plaster - pour stone
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Bubbles in BVC
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Handy lap-making tip
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM suggestions for annealing test
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM dental plaster - pour stone
- From: Mark Holm <mdholm@telerama.com>
- RE: ATM Aussie equiv. to Pourstone/dental Stone
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Oblateness Gone!
- From: Mark Holm <mdholm@telerama.com>
- ATM Are We There Yet?
- From: Mark Holm <mdholm@telerama.com>
- ATM aargh! maybe
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM aargh! maybe
- From: Mark Holm <mdholm@telerama.com>
- ATM batteries for LED
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM aargh! maybe
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM aargh! maybe
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Sixtests hardcopy output
- From: Mark Holm <mdholm@telerama.com>
- Re: ATM Beer-nocular collimation
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM BSC glass vs pyrex
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM Binocular Telescope Design
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM Binocular Telescope Design
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM Funny blank to fix
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM Updated Page: 25" Folded Newtonian
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM f3 elipse?
- From: Mark Suchting <masuch@cia.com.au>
- Re: ATM ROC 101
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM First timer - ecstatic!
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM First timer - ecstatic!
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM OK, OK, I'll start by hand!
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Lateral Wire Test
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Astigmatism
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Lateral Wire Test
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM Astigmatism
- From: Marty.T@t-online.de (Martin Trittelvitz)
- ATM [history] John Pierce page updated
- From: "Matt Considine" <matt@considine.net>
- ATM Gerry Logan contact?
- From: "Matt Considine" <matt@considine.net>
- RE: ATM Grit table?
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: diamond generator, was: ATM OK, OK, I'll start by hand!
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: ATM Beer-nocular telescope collimation.
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Vacuum Flex
- From: "Mel Bartels" <mbartels@efn.org>
- RE: Lithium grease verses Super Lube (Teflon Grease) in ATM project
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Some Telescope Making Parameters Question
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM Some Telescope Making Parameters Question
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM Some Telescope Making Parameters Question
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Some Telescope Making Parameters Question
- From: Mel Bartels <mbartels@efn.org>
- RE: ATM Some Telescope Making Parameters Question
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Amateur English yoke mounts?
- From: "Mel Bartels" <mbartels@efn.org>
- ATM suggestions for annealing test
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Tool diameters for working a 30" mirror blank?
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM 19th Nervous Breakdown
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Star catalogue
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Re: From Dob to Drive
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM central crater
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Porthole glass mirrors
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM secondary cage size
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM : Re: Astigmatism
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM focuser baffle
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Astigmatism
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Astigmatism
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM f3 elipse?
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Sub-di. tool coating ?
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM f3 elipse?
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM crater
- From: "Mel Bartels" <mbartels@efn.org>
- ATM First Baby Steps
- From: "Michael Burr" <mtburr@msn.com>
- Re: ATM OK, OK, I'll start by hand!
- From: "Michael Burr" <mtburr@msn.com>
- ATM Curing cement under water?
- From: "Michael Burr" <mtburr@msn.com>
- ATM hex tiles?
- From: "Michael Burr" <mtburr@msn.com>
- Re: ATM hex tiles?
- From: "Michael Burr" <mtburr@msn.com>
- ATM The Grind Has Begun
- From: "Michael Burr" <mtburr@msn.com>
- Binary attachments and list (was Re: ATM TASCO Support - *** Any rumorof TASCO folding??)
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Where is Berthold Hamburger's Web Site?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Black Rouge
- From: Michael Lindner <mikell@optonline.net>
- ATM New truss/tube material?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM ROC 101
- From: Michael Lindner <mikell@optonline.net>
- ATM The Winburn Channeled Hex Tile Tool...
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM ROC 101
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Sonotube "stripping"
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM 18" First Light
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM hex tiles?
- From: Michael Lindner <mikell@optonline.net>
- ATM Anyone know Dan Cassaro
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Zone Intensity evaluation, Was semi-weird stuff
- From: Michael Peck <mpeck1@ix.netcom.com>
- RE: ATM Zone Intensity evaluation, Was semi-weird stuff
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Diffraction Experts Needed :)
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Edge Diffraction & TDE & Foucault Q's
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Oblateness Gone!
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Astigmatism detection?
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Re: From Dob to Drive
- From: "Michael Robinson " <thomrob@dashlink.com>
- Lithium grease verses Super Lube (Teflon Grease) in ATM project
- From: "Michael Stephan" <mstephan@kconline.com>
- Re: ATM DF-4 Glass type help!
- From: "Mike Spooner" <spooner@page.az.net>
- Re: ATM How good is good enough?
- From: "Mike Spooner" <spooner@page.az.net>
- Re: ATM 3D Mirror bug fix
- From: Mike Warne <warne@lava.net>
- Re: ATM parabolizing question
- From: Mike Warne <warne@lava.net>
- ATM: How to disassemble a Questar ?
- ATM OK, OK, I'll start by hand!
- RE: ATM Re update of web page, 32" dob
- From: "Mutalib Abdallah" <omegatroid@hotmail.com>
- Re: ATM brass washers - machinist question
- Re: ATM Yahoo Groups
- Re: ATM unobstructed Newtonian
- Re: ATM holes in socks/unobstructed Newtonian
- Re: ATM: Large obstruction Newtonians
- Re: ATM skyrock
- From: "Nathan Spaulding" <scopemaker@surfglobal.net>
- Re: ATM Some Telescope Making Parameters Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Some Telescope Making Parameters Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM aargh! maybe
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Re: Dwight's tester
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM aargh! maybe
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM batteries for LED
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM batteries for LED
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM unobstructed Newtonian
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM unobstructed Newtonian
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Energy distribution profile (was: Unobstructed Newtonians)
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Foucault & Pinhole Camera?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Lateral Wire Test
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Lateral Wire Test
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM secondary cage size
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Lateral Wire Test
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM focuser baffle
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: quantitative ronchi, was: ATM Lateral Wire Test
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM mirror coatings
- From: Opticalparts@aol.com
- Re: ATM re:flex list
- From: Opticalparts@aol.com
- ATM: Large obstruction Newtonians
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- ATM Re: Large obstruction Newtonians
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- ATM flex mirror
- From: "Paul Lane" <strgzrastrom@netzero.net>
- ATM Figure 45 query
- From: "Paul Lane" <strgzrastrom@netzero.net>
- Re: ATM Working on a Parabol
- From: "Paul Lane" <strgzrastrom@netzero.net>
- ATM Sagitta
- From: "Paul Lane" <strgzrastrom@netzero.net>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "pdk" <pdk@tampabay.rr.com>
- ATM how to collimate an old celestron schmidt-cass?
- From: "Pete Kalajian" <alnitak@cuisp.com>
- ATM My Crazy Little Project
- From: "Peter" <kitgears@kitgear.com>
- ATM RE: My Crazy Little Project
- From: "Peter" <kitgears@kitgear.com>
- ATM Time Estimations
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM 18" First Light
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Source ideas for heavy grit.
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Measuring Long Radii
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Tool diameters for working a 30" mirror blank?
- From: "Peter" <kitgears@kitgear.com>
- ATM Updated Page: 25" Folded Newtonian
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Updated Page: 25" Folded Newtonian
- From: "Peter" <kitgears@kitgear.com>
- ATM Sub-Diameter Tool and Stroke Length
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Sub-Diameter Tool and Stroke Length
- From: "Peter" <kitgears@kitgear.com>
- ATM Updated Page: 12.5" Two Truss & Round Secondary Cage
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Updated Page: 12.5" Two Truss & Round Secondary Cage
- From: "Peter" <kitgears@kitgear.com>
- RE: ATM Updated Page: 12.5" Two Truss & Round Secondary Cage
- From: "Peter" <kitgears@kitgear.com>
- ATM Re: cheap adaptive optics
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM subtopics (was Re: aluminiziranje)
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Re : Drill grinding
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM BSC glass vs pyrex
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM BSC glass vs pyrex
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Need help interpreting tests
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Measuring Long Radii
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Help! Strange 7 x 50 binocular identification
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM OK, OK, I'll start by hand!
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: diamond generator, was: ATM OK, OK, I'll start by hand!
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Lateral Wire Test
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM How good is good enough?
- From: "PK" <pdk@tampabay.rr.com>
- Re: ATM Notes on Dyeing Nylon Screws Black
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM Foucault & Pinhole Camera?
- From: Raidoflostdark@aol.com
- Re: ATM muzzle velocity
- From: Ralph Seguin <rpseguin@yahoo.com>
- Re: ATM TASCO Support - *** Any rumor of TASCO folding??
- From: Ric Rokosz <radicell2@yahoo.com>
- Re: ATM ferric oxide - printers opaque red solution
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM hex tiles?
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Astigmatism
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Astigmatism
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Vacuum Flex
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM Re update of web page, 32" dob
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM Funny blank
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- ATM Aberrations
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM unobstructed Newtonian
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM Aberrations
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM Aberrations
- From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
- Re: ATM Re update of web page, 32" dob
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM Binocular Telescope Design
- From: Richard Foulk <richard@skydive1.com>
- ATM Large Binocular Telescope
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM thermal expansion coefficient of plate glass
- From: Richard Foulk <richard@skydive1.com>
- ATM folded Newts
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM folded Newts
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM dental plaster - pour stone
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM Groundhog Day?
- From: Richard Foulk <richard@skydive1.com>
- ATM Hole in primary
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM How do you properly cement the mirror hole plug
- From: Richard Foulk <richard@skydive1.com>
- ATM unobstructed Newtonian
- From: Richard Foulk <richard@skydive1.com>
- Subject: Re: ATM Re: Unobstructed Newtonians
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM Apochromatic Eyes?
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM Curing cement under water?
- From: Richard Foulk <richard@skydive1.com>
- Re: ATM Large obstruction Newtonians
- From: Richard Foulk <richard@skydive1.com>
- RE: ATM Email ????????
- From: "Richard Klappal" <klappal@xnet.com>
- Re: ATM ferric oxide - printers opaque red solution
- From: "Richard Ozer" <rozer@ois-online.com>
- Re: ATM-as a terrorist?
- From: "Richard Ozer" <rozer@ois-online.com>
- RE: ATM Any events happening in CA?
- From: "Richard Ozer" <rozer@ois-online.com>
- Re: ATM Portable Vacuum Pump
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Grit sizes for Kits
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Richard's rant email list
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM 3" spherical OK for scope?
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Grit table?
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Some Telescope Making Parameters Question
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM OK, OK, I'll start by hand!
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Re: pinhole
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM OK, OK, I'll start by hand!
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM unobstructed Newtonian
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM unobstructed Newtonian
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM unobstructed Newtonian (correction) - Diagonal Size?
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM How to test a sphere for astigmatism
- From: <richas@catholic.org>
- Re: ATM Re: Coated plastic lenses
- From: <richas@catholic.org>
- ATM I have begun to parabolize
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM I have begun to parabolize
- From: Rick Maillet <bucko_62@yahoo.com>
- ATM Parabolizing Question
- From: Rick Maillet <bucko_62@yahoo.com>
- ATM Working on a Parabol
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Working on a Parabol
- From: Rick Maillet <bucko_62@yahoo.com>
- ATM Made a pinstick
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Need help interpreting tests
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM 18" First Light
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Source ideas for heavy grit.
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Groundhog Day?
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Astigmatism
- From: Rick Maillet <bucko_62@yahoo.com>
- ATM How to test a sphere for astigmatism
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM How to test a sphere for astigmatism
- From: Rick Maillet <bucko_62@yahoo.com>
- ATM Artifical Star testing.
- From: Rick Maillet <bucko_62@yahoo.com>
- Re: ATM Cuting blank?
- From: Robert Fifarek <robojun@juno.com>
- Re: ATM Grit sizes for Kits
- From: Robert Fifarek <robojun@juno.com>
- Re: ATM Handy lap-making tip
- From: "Rodger Petersen" <faintfuzzy@msn.com>
- RE: ATM Fluid Flex? was Vacuum Flex, Hydrostatic Pressure Differential Effect, SLUGS IS MASS NOT DENSITY!!
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM How good is good enough?
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM OK, OK, I'll start by hand!
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM OK, OK, I'll start by hand!
- From: "Sam Michael" <samm@idcomm.com>
- RE: diamond generator, was: ATM OK, OK, I'll start by hand!
- From: "Sam Michael" <samm@idcomm.com>
- ATM Radio Telescopes.
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Figure 45 Query
- From: "Scott Ewart" <scott.e@quicksurfer.com>
- Re: ATM Figure 45 query
- From: "Scott Ewart" <scott.e@quicksurfer.com>
- Re: ATM How good is good enough?
- From: "Scott Ewart" <scott.e@quicksurfer.com>
- Re: ATM Zone Intensity evaluation, Part 2
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Dental Stone
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM How do you properly cement the mirror hole plug
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM OK, OK, I'll start by hand!
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM 36" folded newt
- From: "Shane LaPierre" <shanelapierre@hotmail.com>
- RE: ATM 36" folded newt
- From: "Shane LaPierre" <shanelapierre@hotmail.com>
- Re: ATM Cheap Adaptive Optics +
- From: "Shankland, CDR-Paul" <CDR-Paul.Shankland@cnet.navy.mil>
- FW: RE: ATM Fluid Flex? was Vacuum Flex, Hydrostatic Pressure Differential Effect
- From: "Sidor . Kurt" <KSidor@drc.com>
- RE: ATM Fluid Flex? was Vacuum Flex, Hydrostatic Pressure Differential Effect, SLUGS IS MASS NOT DENSITY!!
- From: "Sidor . Kurt" <KSidor@drc.com>
- RE: ATM DF-4 Glass type help!
- From: "Sidor . Kurt" <KSidor@drc.com>
- FW: RE: ATM DF-4 Glass type help! OSLO LT error?
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Re: quantitative ronchi
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Sub-di. tool coating ?
- From: Simon Fourstar <sfourstar@earthlink.net>
- ATM Break Clutch
- From: Stan Gorodenski <stanlep@extremezone.com>
- Re: ATM Fluid Flex? was Vacuum Flex
- From: "Stan Kohut" <nutsp@alltel.net>
- Re: ATM Annoying Cerium Oxide Residue
- From: "Stan Kohut" <nutsp@alltel.net>
- Re: ATM micro ripple
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Re update of web page, 32" dob
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Tool diameters for working a 30" mirror blank?
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Updated Page: 25" Folded Newtonian
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Diameter of secondary cage (is this method correct?)
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Updated Page: 12.5" Two Truss & Round Secondary Cage
- From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
- Re: ATM Texereau and metric
- From: Stephen Steel <steve.steel@kvs.com>
- Re: ATM Sixtests hardcopy output
- From: Stephen Steel <steve.steel@kvs.com>
- RE: ATM carbon fabric protection
- From: Stephen Steel <steve.steel@kvs.com>
- Re: ATM muzzle velocity
- From: Steve Beccue <lsteve@daffodil.beccue.org>
- Re: ATM coated plastic lenses
- From: Steve Fejes <jsfejes@swva.net>
- Re: ATM Radio Telescopes.
- From: Steve JB Bouton <sjbbouton@juno.com>
- ATM Bubbles in BVC
- From: "Steve Shumway" <sshumway@neo.rr.com>
- Re: ATM batteries for LED / Pulsed LED Astro-Lamp
- From: Technologie2000@t-online.de (Technologie 2000 GmbH)
- Re: ATM carbon fabric protection
- From: Technologie2000@t-online.de (Technologie 2000 GmbH)
- ATM-as a terrorist?
- From: "Thomas A Simmons" <tasimmons@raytheon.com>
- Re: was:ATM thermal expansion now: ATMing is NOT curable
- From: "Thomas A Simmons" <tasimmons@raytheon.com>
- Re: ATM batteries for LED
- From: "Thomas A Simmons" <tasimmons@raytheon.com>
- ATM Grit sizes for Kits
- From: "Thomas A. Moulton" <tom@moulton.us>
- ATM Grit Table?
- From: "Thomas A. Moulton" <tom@moulton.us>
- Re: ATM dental plaster - pour stone
- From: "Thomas A. Moulton" <tom@moulton.us>
- Re: ATM dental plaster - pour stone
- From: "Thomas A. Moulton" <tom@moulton.us>
- Re: ATM dental plaster - pour stone
- From: "Thomas A. Moulton" <tom@moulton.us>
- ATM Thanks to all. (was US voltage)
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM suggestions for annealing test
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Way OT. Need some help.
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Email ????????
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Sec program
- From: Tom Diehl <tjdcds@fiastl.net>
- ATM Old Meade Telescope - Info Requested
- From: Tom Roginski <owl1@mail.ptd.net>
- Re: ATM Re: Astronomy software
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM Erect image
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM Source ideas for heavy grit.
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM Erect image
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM batteries for LED
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM Sixtests hardcopy output
- From: Tom Stokes <tstokes@pacbell.net>
- Re: ATM Sub-Diameter Tool and Stroke Length
- From: Tom Stokes <tstokes@pacbell.net>
- ATM Figure 45 Query
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM HTML
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- Re: ATM Figure 45 Query
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- Re: ATM HTML
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- recycling mud, was: ATM Grit sizes for Kits
- From: u.suessenberger@t-online.de (Uwe Suessenberger)
- black rouge, was: ATM Grit sizes for Kits
- From: u.suessenberger@t-online.de (Uwe Suessenberger)
- Re: ATM Australian source of pitch?
- From: "Vero and Lisa Joseph" <thejosephs@ozemail.com.au>
- Re: ATM mirror coatings
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Foreign language.
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Portable Vacuum Pump
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Vacuum Flex
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: Lithium grease verses Super Lube (Teflon Grease) in ATM project
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM TASCO Support - *** Any rumor of TASCO folding??
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: Grinding Curved back mirror? Re: ATM Portable Vacuum Pump
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Fluid Flex? was Vacuum Flex, Hydrostatic Pressure Differential Effect, SLUGS IS MASS NOT DENSITY!!
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Grit table?
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM seeking mirror chip advice
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- ATM Quality of polish
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Quality of polish
- From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
- Re: ATM Making a Pinhole
- From: <wffinney@mailbox.syr.edu>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question (errata)
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- RE: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM Some Telescope Making Parameters Question
- From: William Herschel <williamherschell@yahoo.com>
- ATM Diameter of secondary cage (is this method correct?)
- From: William Herschel <williamherschell@yahoo.com>
- ATM suppliers in New York city
- From: William Herschel <williamherschell@yahoo.com>
- Re: ATM moving the NCA lathe, aluminizer, vacuum pump, and cabinets
- From: William Mc Hale <wmchal1@umbc.edu>
- ATM Laser diode with 'collimating lens'
- From: "William Thornley" <billt051@hotmail.com>
- Re: ATM Eyepieces
- From: "William Thornley" <billt051@hotmail.com>
Mail converted by MHonArc 2.4.7