Re: ATM : Hole in the middle

[Brian Nestel <blast@aloha.net>]

robert allen wrote:

>                 We are now ready to polish but cannot decide how
>         to build a lap that can be pressed properly.
Hi:
Cut a wooden plug to fit the hole and remove it when you polish, you don't
need the hole filled when you polish.
I don't know if your center hole is beveled, but if it isn't I would put a
small bevel on it to keep small flakes from breaking off and scratching the
surface when you polish.
-- 
Aloha   159 30 W, 21 55 N
Brian   Middle of the Pacific,
_________________________________________________________
|         NESCOMP         |          K.E.A.S.A.         |      
|    Computer Services    |Kauai Educational Association| 
| Box 73, Lawai, HI 96765 |  for Science and Astronomy  |          
| Voice/Fax 808-332-7709  |  Box 161, Waimea, HI 96796  |
|     blast@aloha.net     |                             |

   To doubt everything or to believe everything
   are two equally convenient solutions; both
   dispense with the necessity of reflection.
            - Jules Henri Poincare