Re: ATM : Hole in the middle

[Hermit <klowther@concentric.net>]

An old atm I know told me he had his plug in with wax until the very
end.

Ken
http://www.atmsite.org


Dwight Elvey wrote:
> 
> "robert allen" <rallen@iland.net> wrote:
> >               Hope some one out there has beat this problem before.
> >       We are wide open for advise or sugestions.
> 
> Hi
>  I would think that the best way would be to remove the
> pitch material to a diameter slightly larger than the
> hole. This way you could hot press. It would be about the same
> as the edge of the mirror. When you polish, the pitch
> over hangs a little. This would be the same at the
> center. The vary edge isn't usually as important
> because in most cases, the hole is used as part of the
> mount.
> Dwight