Re: ATM Active mirror figure correction?

[Dave Sopchak <das@po.cwru.edu>]

Lawrence,


There was an article in S&T in the early '90s about a guy, who amongst
other things, had a 6" mirror he glued a bolt to in the middle, supported
the rim with carpet, and tuned his way to a good figure by adjusting the
tension on the mirror by turning the nut on the bolt. I guess if it can be
done on a 6", it can be done on your 13"...
        Dunno what kind of glue he used or the specific issue of S&T, but
it has been done...

Dave


_________________________________________
"All of my houseplants are Y2K compliant"